#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/setup.h>
+#include <asm/processor-flags.h>
+
+/* Physical address */
+#define pa(X) ((X) - __PAGE_OFFSET)
/*
* References to members of the new_cpu_data structure.
*/
.section .text.head,"ax",@progbits
ENTRY(startup_32)
- /* check to see if KEEP_SEGMENTS flag is meaningful */
- cmpw $0x207, BP_version(%esi)
- jb 1f
-
/* test KEEP_SEGMENTS flag to see if the bootloader is asking
us to not reload segments */
testb $(1<<6), BP_loadflags(%esi)
/*
* Set segments to known values.
*/
-1: lgdt boot_gdt_descr - __PAGE_OFFSET
+ lgdt pa(boot_gdt_descr)
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
*/
cld
xorl %eax,%eax
- movl $__bss_start - __PAGE_OFFSET,%edi
- movl $__bss_stop - __PAGE_OFFSET,%ecx
+ movl $pa(__bss_start),%edi
+ movl $pa(__bss_stop),%ecx
subl %edi,%ecx
shrl $2,%ecx
rep ; stosl
* (kexec on panic case). Hence copy out the parameters before initializing
* page tables.
*/
- movl $(boot_params - __PAGE_OFFSET),%edi
+ movl $pa(boot_params),%edi
movl $(PARAM_SIZE/4),%ecx
cld
rep
movsl
- movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi
+ movl pa(boot_params) + NEW_CL_POINTER,%esi
andl %esi,%esi
jz 1f # No comand line
- movl $(boot_command_line - __PAGE_OFFSET),%edi
+ movl $pa(boot_command_line),%edi
movl $(COMMAND_LINE_SIZE/4),%ecx
rep
movsl
1:
#ifdef CONFIG_PARAVIRT
- cmpw $0x207, (boot_params + BP_version - __PAGE_OFFSET)
+ /* This is can only trip for a broken bootloader... */
+ cmpw $0x207, pa(boot_params + BP_version)
jb default_entry
/* Paravirt-compatible boot parameters. Look to see what architecture
we're booting under. */
- movl (boot_params + BP_hardware_subarch - __PAGE_OFFSET), %eax
+ movl pa(boot_params + BP_hardware_subarch), %eax
cmpl $num_subarch_entries, %eax
jae bad_subarch
- movl subarch_entries - __PAGE_OFFSET(,%eax,4), %eax
+ movl pa(subarch_entries)(,%eax,4), %eax
subl $__PAGE_OFFSET, %eax
jmp *%eax
* Mappings are created both at virtual address 0 (identity mapping)
* and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END.
*
- * Warning: don't use %esi or the stack in this code. However, %esp
- * can be used as a GPR if you really need it...
+ * Note that the stack is not yet set up!
*/
-page_pde_offset = (__PAGE_OFFSET >> 20);
+#define PTE_ATTR 0x007 /* PRESENT+RW+USER */
+#define PDE_ATTR 0x067 /* PRESENT+RW+USER+DIRTY+ACCESSED */
+#define PGD_ATTR 0x001 /* PRESENT (no other attributes) */
default_entry:
- movl $(pg0 - __PAGE_OFFSET), %edi
- movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
- movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
+#ifdef CONFIG_X86_PAE
+
+ /*
+ * In PAE mode swapper_pg_dir is statically defined to contain enough
+ * entries to cover the VMSPLIT option (that is the top 1, 2 or 3
+ * entries). The identity mapping is handled by pointing two PGD
+ * entries to the first kernel PMD.
+ *
+ * Note the upper half of each PMD or PTE are always zero at
+ * this stage.
+ */
+
+#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */
+
+ xorl %ebx,%ebx /* %ebx is kept at zero */
+
+ movl $pa(pg0), %edi
+ movl $pa(swapper_pg_pmd), %edx
+ movl $PTE_ATTR, %eax
+10:
+ leal PDE_ATTR(%edi),%ecx /* Create PMD entry */
+ movl %ecx,(%edx) /* Store PMD entry */
+ /* Upper half already zero */
+ addl $8,%edx
+ movl $512,%ecx
+11:
+ stosl
+ xchgl %eax,%ebx
+ stosl
+ xchgl %eax,%ebx
+ addl $0x1000,%eax
+ loop 11b
+
+ /*
+ * End condition: we must map up to and including INIT_MAP_BEYOND_END
+ * bytes beyond the end of our own page tables.
+ */
+ leal (INIT_MAP_BEYOND_END+PTE_ATTR)(%edi),%ebp
+ cmpl %ebp,%eax
+ jb 10b
+1:
+ movl %edi,pa(init_pg_tables_end)
+
+ /* Do early initialization of the fixmap area */
+ movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
+ movl %eax,pa(swapper_pg_pmd+0x1000*KPMDS-8)
+#else /* Not PAE */
+
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+ movl $pa(pg0), %edi
+ movl $pa(swapper_pg_dir), %edx
+ movl $PTE_ATTR, %eax
10:
- leal 0x007(%edi),%ecx /* Create PDE entry */
+ leal PDE_ATTR(%edi),%ecx /* Create PDE entry */
movl %ecx,(%edx) /* Store identity PDE entry */
movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
addl $4,%edx
stosl
addl $0x1000,%eax
loop 11b
- /* End condition: we must map up to and including INIT_MAP_BEYOND_END */
- /* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */
- leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp
+ /*
+ * End condition: we must map up to and including INIT_MAP_BEYOND_END
+ * bytes beyond the end of our own page tables; the +0x007 is
+ * the attribute bits
+ */
+ leal (INIT_MAP_BEYOND_END+PTE_ATTR)(%edi),%ebp
cmpl %ebp,%eax
jb 10b
- movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
-
- /* Do an early initialization of the fixmap area */
- movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
- movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax
- addl $0x67, %eax /* 0x67 == _PAGE_TABLE */
- movl %eax, 4092(%edx)
+ movl %edi,pa(init_pg_tables_end)
+ /* Do early initialization of the fixmap area */
+ movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
+ movl %eax,pa(swapper_pg_dir+0xffc)
+#endif
jmp 3f
/*
* Non-boot CPU entry point; entered from trampoline.S
* NOTE! We have to correct for the fact that we're
* not yet offset PAGE_OFFSET..
*/
-#define cr4_bits mmu_cr4_features-__PAGE_OFFSET
+#define cr4_bits pa(mmu_cr4_features)
movl cr4_bits,%edx
andl %edx,%edx
jz 6f
/*
* Enable paging
*/
- movl $swapper_pg_dir-__PAGE_OFFSET,%eax
+ movl $pa(swapper_pg_dir),%eax
movl %eax,%cr3 /* set the page table pointer.. */
movl %cr0,%eax
- orl $0x80000000,%eax
+ orl $X86_CR0_PG,%eax
movl %eax,%cr0 /* ..and set paging (PG) bit */
ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
1:
*/
.section ".bss.page_aligned","wa"
.align PAGE_SIZE_asm
+#ifdef CONFIG_X86_PAE
+swapper_pg_pmd:
+ .fill 1024*KPMDS,4,0
+#else
ENTRY(swapper_pg_dir)
.fill 1024,4,0
-ENTRY(swapper_pg_pmd)
+#endif
+swapper_pg_fixmap:
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
-
/*
* This starts the data section.
*/
+#ifdef CONFIG_X86_PAE
+.section ".data.page_aligned","wa"
+ /* Page-aligned for the benefit of paravirt? */
+ .align PAGE_SIZE_asm
+ENTRY(swapper_pg_dir)
+ .long pa(swapper_pg_pmd+PGD_ATTR),0 /* low identity map */
+# if KPMDS == 3
+ .long pa(swapper_pg_pmd+PGD_ATTR),0
+ .long pa(swapper_pg_pmd+PGD_ATTR+0x1000),0
+ .long pa(swapper_pg_pmd+PGD_ATTR+0x2000),0
+# elif KPMDS == 2
+ .long 0,0
+ .long pa(swapper_pg_pmd+PGD_ATTR),0
+ .long pa(swapper_pg_pmd+PGD_ATTR+0x1000),0
+# elif KPMDS == 1
+ .long 0,0
+ .long 0,0
+ .long pa(swapper_pg_pmd+PGD_ATTR),0
+# else
+# error "Kernel PMDs should be 1, 2 or 3"
+# endif
+ .align PAGE_SIZE_asm /* needs to be page-sized too */
+#endif
+
.data
ENTRY(stack_start)
.long init_thread_union+THREAD_SIZE
.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
fault_msg:
- .ascii \
+ .asciz \
/* fault info: */ "BUG: Int %d: CR2 %p\n" \
/* pusha regs: */ " EDI %p ESI %p EBP %p ESP %p\n" \
" EBX %p EDX %p ECX %p EAX %p\n" \
git.samba.org / sfrench / cifs-2.6.git / blobdiff