/*
* Debug level, exported for io_apic.c
*/
-int apic_verbosity;
+unsigned int apic_verbosity;
int pic_mode;
/* Level triggered for 82489DX */
if (!lapic_is_integrated())
v |= APIC_LVT_LEVEL_TRIGGER;
- apic_write_around(APIC_LVT0, v);
+ apic_write(APIC_LVT0, v);
}
/**
* this function twice on the boot CPU, once with a bogus timeout
* value, second time for real. The other (noncalibrating) CPUs
* call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
*/
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
if (!irqen)
lvtt_value |= APIC_LVT_MASKED;
- apic_write_around(APIC_LVTT, lvtt_value);
+ apic_write(APIC_LVTT, lvtt_value);
/*
* Divide PICLK by 16
*/
tmp_value = apic_read(APIC_TDCR);
- apic_write_around(APIC_TDCR, (tmp_value
- & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
- | APIC_TDR_DIV_16);
+ apic_write(APIC_TDCR,
+ (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+ APIC_TDR_DIV_16);
if (!oneshot)
- apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
+ apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
}
/*
static int lapic_next_event(unsigned long delta,
struct clock_event_device *evt)
{
- apic_write_around(APIC_TMICT, delta);
+ apic_write(APIC_TMICT, delta);
return 0;
}
case CLOCK_EVT_MODE_SHUTDOWN:
v = apic_read(APIC_LVTT);
v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write_around(APIC_LVTT, v);
+ apic_write(APIC_LVTT, v);
break;
case CLOCK_EVT_MODE_RESUME:
/* Nothing to do here */
}
}
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
{
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
const long pm_100ms = PMTMR_TICKS_PER_SEC/10;
long delta, deltapm;
int pm_referenced = 0;
- /*
- * The local apic timer can be disabled via the kernel
- * commandline or from the CPU detection code. Register the lapic
- * timer as a dummy clock event source on SMP systems, so the
- * broadcast mechanism is used. On UP systems simply ignore it.
- */
- if (local_apic_timer_disabled) {
- /* No broadcast on UP ! */
- if (num_possible_cpus() > 1) {
- lapic_clockevent.mult = 1;
- setup_APIC_timer();
- }
- return;
- }
-
- apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
- "calibrating APIC timer ...\n");
-
local_irq_disable();
/* Replace the global interrupt handler */
calibration_result / (1000000 / HZ),
calibration_result % (1000000 / HZ));
- local_apic_timer_verify_ok = 1;
-
/*
* Do a sanity check on the APIC calibration result
*/
local_irq_enable();
printk(KERN_WARNING
"APIC frequency too slow, disabling apic timer\n");
- /* No broadcast on UP ! */
- if (num_possible_cpus() > 1)
- setup_APIC_timer();
- return;
+ return -1;
}
+ local_apic_timer_verify_ok = 1;
+
/* We trust the pm timer based calibration */
if (!pm_referenced) {
apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
if (!local_apic_timer_verify_ok) {
printk(KERN_WARNING
"APIC timer disabled due to verification failure.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Setup the boot APIC
+ *
+ * Calibrate and verify the result.
+ */
+void __init setup_boot_APIC_clock(void)
+{
+ /*
+ * The local apic timer can be disabled via the kernel
+ * commandline or from the CPU detection code. Register the lapic
+ * timer as a dummy clock event source on SMP systems, so the
+ * broadcast mechanism is used. On UP systems simply ignore it.
+ */
+ if (local_apic_timer_disabled) {
/* No broadcast on UP ! */
- if (num_possible_cpus() == 1)
- return;
- } else {
- /*
- * If nmi_watchdog is set to IO_APIC, we need the
- * PIT/HPET going. Otherwise register lapic as a dummy
- * device.
- */
- if (nmi_watchdog != NMI_IO_APIC)
- lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
- else
- printk(KERN_WARNING "APIC timer registered as dummy,"
- " due to nmi_watchdog=%d!\n", nmi_watchdog);
+ if (num_possible_cpus() > 1) {
+ lapic_clockevent.mult = 1;
+ setup_APIC_timer();
+ }
+ return;
}
+ apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+ "calibrating APIC timer ...\n");
+
+ if (calibrate_APIC_clock()) {
+ /* No broadcast on UP ! */
+ if (num_possible_cpus() > 1)
+ setup_APIC_timer();
+ return;
+ }
+
+ /*
+ * If nmi_watchdog is set to IO_APIC, we need the
+ * PIT/HPET going. Otherwise register lapic as a dummy
+ * device.
+ */
+ if (nmi_watchdog != NMI_IO_APIC)
+ lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+ else
+ printk(KERN_WARNING "APIC timer registered as dummy,"
+ " due to nmi_watchdog=%d!\n", nmi_watchdog);
+
/* Setup the lapic or request the broadcast */
setup_APIC_timer();
}
*/
if (maxlvt >= 3) {
v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
- apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
}
/*
* Careful: we have to set masks only first to deassert
* any level-triggered sources.
*/
v = apic_read(APIC_LVTT);
- apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
v = apic_read(APIC_LVT1);
- apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
if (maxlvt >= 4) {
v = apic_read(APIC_LVTPC);
- apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
}
/* lets not touch this if we didn't frob it */
#ifdef CONFIG_X86_MCE_P4THERMAL
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
- apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
}
#endif
/*
* Clean APIC state for other OSs:
*/
- apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
- apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
+ apic_write(APIC_LVTT, APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED);
+ apic_write(APIC_LVT1, APIC_LVT_MASKED);
if (maxlvt >= 3)
- apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
+ apic_write(APIC_LVTERR, APIC_LVT_MASKED);
if (maxlvt >= 4)
- apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+ apic_write(APIC_LVTPC, APIC_LVT_MASKED);
#ifdef CONFIG_X86_MCE_P4THERMAL
if (maxlvt >= 5)
- apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+ apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
#endif
/* Integrated APIC (!82489DX) ? */
if (lapic_is_integrated()) {
*/
value = apic_read(APIC_SPIV);
value &= ~APIC_SPIV_APIC_ENABLED;
- apic_write_around(APIC_SPIV, value);
+ apic_write(APIC_SPIV, value);
/*
* When LAPIC was disabled by the BIOS and enabled by the kernel,
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
- | APIC_DM_INIT);
+ apic_write(APIC_ICR,
+ APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
/*
else
value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
- apic_write_around(APIC_SPIV, value);
+ apic_write(APIC_SPIV, value);
/*
* Set up the virtual wire mode.
*/
- apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI;
if (!lapic_is_integrated()) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
- apic_write_around(APIC_LVT1, value);
+ apic_write(APIC_LVT1, value);
}
static void __cpuinit lapic_setup_esr(void)
/* enables sending errors */
value = ERROR_APIC_VECTOR;
- apic_write_around(APIC_LVTERR, value);
+ apic_write(APIC_LVTERR, value);
/*
* spec says clear errors after enabling vector.
*/
*/
value = apic_read(APIC_TASKPRI);
value &= ~APIC_TPRI_MASK;
- apic_write_around(APIC_TASKPRI, value);
+ apic_write(APIC_TASKPRI, value);
/*
* After a crash, we no longer service the interrupts and a pending
* Set spurious IRQ vector
*/
value |= SPURIOUS_APIC_VECTOR;
- apic_write_around(APIC_SPIV, value);
+ apic_write(APIC_SPIV, value);
/*
* Set up LVT0, LVT1:
apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
smp_processor_id());
}
- apic_write_around(APIC_LVT0, value);
+ apic_write(APIC_LVT0, value);
/*
* only the BP should see the LINT1 NMI signal, obviously.
value = APIC_DM_NMI | APIC_LVT_MASKED;
if (!integrated) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
- apic_write_around(APIC_LVT1, value);
+ apic_write(APIC_LVT1, value);
}
void __cpuinit end_local_APIC_setup(void)
/* Disable the local apic timer */
value = apic_read(APIC_LVTT);
value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write_around(APIC_LVTT, value);
+ apic_write(APIC_LVTT, value);
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
int __init APIC_init_uniprocessor(void)
{
- if (disable_apic)
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-
if (!smp_found_config && !cpu_has_apic)
return -1;
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
value |= 0xf;
- apic_write_around(APIC_SPIV, value);
+ apic_write(APIC_SPIV, value);
if (!virt_wire_setup) {
/*
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write_around(APIC_LVT0, value);
+ apic_write(APIC_LVT0, value);
} else {
/* Disable LVT0 */
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
/*
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write_around(APIC_LVT1, value);
+ apic_write(APIC_LVT1, value);
}
}
static int __init parse_nolapic(char *arg)
{
disable_apic = 1;
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+ setup_clear_cpu_cap(X86_FEATURE_APIC);
return 0;
}
early_param("nolapic", parse_nolapic);
git.samba.org / sfrench / cifs-2.6.git / blobdiff