#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
static int __initdata acpi_force = 0;
u32 acpi_rsdt_forced;
-#ifdef CONFIG_ACPI
-int acpi_disabled = 0;
-#else
-int acpi_disabled = 1;
-#endif
+int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);
#ifdef CONFIG_X86_64
early_iounmap(map, size);
}
-#ifdef CONFIG_PCI_MMCONFIG
-
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
-/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
-
-static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
-{
- if (!strcmp(mcfg->header.oem_id, "SGI"))
- acpi_mcfg_64bit_base_addr = TRUE;
-
- return 0;
-}
-
-int __init acpi_parse_mcfg(struct acpi_table_header *header)
-{
- struct acpi_table_mcfg *mcfg;
- unsigned long i;
- int config_size;
-
- if (!header)
- return -EINVAL;
-
- mcfg = (struct acpi_table_mcfg *)header;
-
- /* how many config structures do we have */
- pci_mmcfg_config_num = 0;
- i = header->length - sizeof(struct acpi_table_mcfg);
- while (i >= sizeof(struct acpi_mcfg_allocation)) {
- ++pci_mmcfg_config_num;
- i -= sizeof(struct acpi_mcfg_allocation);
- };
- if (pci_mmcfg_config_num == 0) {
- printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
- return -ENODEV;
- }
-
- config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
- pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
- if (!pci_mmcfg_config) {
- printk(KERN_WARNING PREFIX
- "No memory for MCFG config tables\n");
- return -ENOMEM;
- }
-
- memcpy(pci_mmcfg_config, &mcfg[1], config_size);
-
- acpi_mcfg_oem_check(mcfg);
-
- for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
- !acpi_mcfg_64bit_base_addr) {
- printk(KERN_ERR PREFIX
- "MMCONFIG not in low 4GB of memory\n");
- kfree(pci_mmcfg_config);
- pci_mmcfg_config_num = 0;
- return -ENODEV;
- }
- }
-
- return 0;
-}
-#endif /* CONFIG_PCI_MMCONFIG */
-
#ifdef CONFIG_X86_LOCAL_APIC
static int __init acpi_parse_madt(struct acpi_table_header *table)
{
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- if (triggering == ACPI_LEVEL_SENSITIVE)
+ if (trigger == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
#endif
static struct {
- int apic_id;
int gsi_base;
int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
} mp_ioapic_routing[MAX_IO_APICS];
int mp_find_ioapic(int gsi)
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
mp_ioapics[idx].apicver = io_apic_get_version(idx);
-#else
- mp_ioapics[idx].apicver = 0;
-#endif
+
/*
* Build basic GSI lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI GSIs).
*/
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
mp_ioapic_routing[idx].gsi_base = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
}
}
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
int ioapic;
- int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
+ u8 pin;
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+ int ioapic;
+ int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#endif
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
gsi = ioapic_renumber_irq(ioapic, gsi);
#endif
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ "%d-%d\n", mp_ioapics[ioapic].apicid,
ioapic_pin);
return gsi;
}
- if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
- return gsi;
-#endif
- }
- set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
-}
+ if (enable_update_mptable)
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- int ioapic;
-
- if (!acpi_ioapic)
- return 0;
+ set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+ trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &irq_attr);
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- save_mp_irq(&mp_irq);
-#endif
- return 0;
+ return gsi;
}
/*
DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
},
},
- {
- .callback = force_acpi_ht,
- .ident = "ASUS P4B266",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
- },
- },
{
.callback = force_acpi_ht,
.ident = "ASUS P2B-DS",
git.samba.org / sfrench / cifs-2.6.git / blobdiff