KVM is not seen under X86 config with latest git (32 bit compile)
[sfrench/cifs-2.6.git] / arch / x86 / Kconfig
index 81af31e5a9f143fb98209c8b1b3d05e243ab5ba5..3be2305709b7e4a6f99ef6a5d95aace793c73952 100644 (file)
@@ -18,6 +18,11 @@ config X86_64
 ### Arch settings
 config X86
        def_bool y
+       select HAVE_IDE
+       select HAVE_OPROFILE
+       select HAVE_KPROBES
+       select HAVE_KVM
+
 
 config GENERIC_LOCKBREAK
        def_bool n
@@ -44,9 +49,16 @@ config LOCKDEP_SUPPORT
 config STACKTRACE_SUPPORT
        def_bool y
 
+config HAVE_LATENCYTOP_SUPPORT
+       def_bool y
+
 config SEMAPHORE_SLEEPERS
        def_bool y
 
+config FAST_CMPXCHG_LOCAL
+       bool
+       default y
+
 config MMU
        def_bool y
 
@@ -72,6 +84,9 @@ config GENERIC_BUG
 config GENERIC_HWEIGHT
        def_bool y
 
+config GENERIC_GPIO
+       def_bool n
+
 config ARCH_MAY_HAVE_PC_FDC
        def_bool y
 
@@ -90,6 +105,9 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
        def_bool n
 
+config ARCH_HAS_CPU_IDLE_WAIT
+       def_bool y
+
 config GENERIC_CALIBRATE_DELAY
        def_bool y
 
@@ -97,13 +115,19 @@ config GENERIC_TIME_VSYSCALL
        bool
        default X86_64
 
-config ARCH_SETS_UP_PER_CPU_AREA
+config ARCH_HAS_CPU_RELAX
+       def_bool y
+
+config HAVE_SETUP_PER_CPU_AREA
        def_bool X86_64
 
-config ARCH_SUPPORTS_OPROFILE
-       bool
-       default y
+config ARCH_HIBERNATION_POSSIBLE
+       def_bool y
+       depends on !SMP || !X86_VOYAGER
 
+config ARCH_SUSPEND_POSSIBLE
+       def_bool y
+       depends on !X86_VOYAGER
 
 config ZONE_DMA32
        bool
@@ -116,6 +140,9 @@ config AUDIT_ARCH
        bool
        default X86_64
 
+config ARCH_SUPPORTS_AOUT
+       def_bool y
+
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
        bool
@@ -189,8 +216,7 @@ config SMP
          Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
          Management" code will be disabled if you say Y here.
 
-         See also the <file:Documentation/smp.txt>,
-         <file:Documentation/i386/IO-APIC.txt>,
+         See also <file:Documentation/i386/IO-APIC.txt>,
          <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
          <http://www.tldp.org/docs.html#howto>.
 
@@ -288,6 +314,19 @@ config X86_ES7000
          Only choose this option if you have such a system, otherwise you
          should say N here.
 
+config X86_RDC321X
+       bool "RDC R-321x SoC"
+       depends on X86_32
+       select M486
+       select X86_REBOOTFIXUPS
+       select GENERIC_GPIO
+       select LEDS_CLASS
+       select LEDS_GPIO
+       help
+         This option is needed for RDC R-321x system-on-chip, also known
+         as R-8610-(G).
+         If you don't have one of these chips, you should say N here.
+
 config X86_VSMP
        bool "Support for ScaleMP vSMP"
        depends on X86_64 && PCI
@@ -310,18 +349,8 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER
 
          If in doubt, say "Y".
 
-config PARAVIRT
-       bool
-       depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
-       help
-         This changes the kernel so it can modify itself when it is run
-         under a hypervisor, potentially improving performance significantly
-         over full virtualization.  However, when run without a hypervisor
-         the kernel is theoretically slower and slightly larger.
-
 menuconfig PARAVIRT_GUEST
        bool "Paravirtualized guest support"
-       depends on X86_32
        help
          Say Y here to get to see options related to running Linux under
          various hypervisors.  This option alone does not add any kernel code.
@@ -335,6 +364,7 @@ source "arch/x86/xen/Kconfig"
 config VMI
        bool "VMI Guest support"
        select PARAVIRT
+       depends on X86_32
        depends on !(X86_VISWS || X86_VOYAGER)
        help
          VMI provides a paravirtualized interface to the VMware ESX server
@@ -344,6 +374,15 @@ config VMI
 
 source "arch/x86/lguest/Kconfig"
 
+config PARAVIRT
+       bool "Enable paravirtualization code"
+       depends on !(X86_VISWS || X86_VOYAGER)
+       help
+         This changes the kernel so it can modify itself when it is run
+         under a hypervisor, potentially improving performance significantly
+         over full virtualization.  However, when run without a hypervisor
+         the kernel is theoretically slower and slightly larger.
+
 endif
 
 config ACPI_SRAT
@@ -390,7 +429,7 @@ config HPET_TIMER
 
 config HPET_EMULATE_RTC
        def_bool y
-       depends on HPET_TIMER && RTC=y
+       depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
 
 # Mark as embedded because too many people got it wrong.
 # The code disables itself when not needed.
@@ -440,6 +479,9 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
          Calgary anyway, pass 'iommu=calgary' on the kernel command line.
          If unsure, say Y.
 
+config IOMMU_HELPER
+       def_bool (CALGARY_IOMMU || GART_IOMMU)
+
 # need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
        bool
@@ -603,7 +645,6 @@ config TOSHIBA
 
 config I8K
        tristate "Dell laptop support"
-       depends on X86_32
        ---help---
          This adds a driver to safely access the System Management Mode
          of the CPU on the Dell Inspiron 8000. The System Management Mode
@@ -634,7 +675,7 @@ config X86_REBOOTFIXUPS
          system.
 
          Currently, the only fixup is for the Geode machines using
-         CS5530A and CS5536 chipsets.
+         CS5530A and CS5536 chipsets and the RDC R-321x SoC.
 
          Say Y if you want to enable the fixup. Currently, it's safe to
          enable this option even if you don't need it.
@@ -994,12 +1035,6 @@ config IRQBALANCE
          The default yes will allow the kernel to do irq load balancing.
          Saying no will keep the kernel from doing irq load balancing.
 
-# turning this on wastes a bunch of space.
-# Summit needs it only when NUMA is on
-config BOOT_IOREMAP
-       def_bool y
-       depends on X86_32 && (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
-
 config SECCOMP
        def_bool y
        prompt "Enable seccomp to safely compute untrusted bytecode"
@@ -1356,11 +1391,6 @@ config PCI
          your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
          VESA. If you have PCI, say Y, otherwise N.
 
-         The PCI-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>, contains valuable
-         information about which PCI hardware does work under Linux and which
-         doesn't.
-
 choice
        prompt "PCI access mode"
        depends on X86_32 && PCI && !X86_VISWS
@@ -1554,7 +1584,7 @@ config IA32_EMULATION
 
 config IA32_AOUT
        tristate "IA32 a.out support"
-       depends on IA32_EMULATION
+       depends on IA32_EMULATION && ARCH_SUPPORTS_AOUT
        help
          Support old a.out binaries in the 32bit emulation.
 
@@ -1581,12 +1611,12 @@ source "drivers/firmware/Kconfig"
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/x86/Kconfig.debug"
 
 source "security/Kconfig"
 
 source "crypto/Kconfig"
 
+source "arch/x86/kvm/Kconfig"
+
 source "lib/Kconfig"