Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

[sfrench/cifs-2.6.git] / arch / powerpc / platforms / Kconfig

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 19d4628edf79213c9244130f4080d11f1f65d7e8..fcedbec07f94fe7478f50f19833afe3b9c87a20e 100644 (file)
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -12,20 +12,19 @@ config PPC_MULTIPLATFORM
          RS/6000 machine, an Apple machine, or a PReP, CHRP,
          Maple or Cell-based machine.
 
-config EMBEDDED6xx
-       bool "Embedded 6xx/7xx/7xxx-based board"
-       depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
-
 config PPC_82xx
        bool "Freescale 82xx"
        depends on 6xx
+       select WANT_DEVICE_TREE
 
 config PPC_83xx
        bool "Freescale 83xx"
        depends on 6xx
        select FSL_SOC
-       select 83xx
+       select MPC83xx
+       select IPIC
        select WANT_DEVICE_TREE
+       select FSL_EMB_PERFMON
 
 config PPC_86xx
        bool "Freescale 86xx"
@@ -43,6 +42,7 @@ config CLASSIC32
 source "arch/powerpc/platforms/pseries/Kconfig"
 source "arch/powerpc/platforms/iseries/Kconfig"
 source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/512x/Kconfig"
 source "arch/powerpc/platforms/52xx/Kconfig"
 source "arch/powerpc/platforms/powermac/Kconfig"
 source "arch/powerpc/platforms/prep/Kconfig"
@@ -58,7 +58,7 @@ source "arch/powerpc/platforms/85xx/Kconfig"
 source "arch/powerpc/platforms/86xx/Kconfig"
 source "arch/powerpc/platforms/embedded6xx/Kconfig"
 source "arch/powerpc/platforms/44x/Kconfig"
-#source "arch/powerpc/platforms/4xx/Kconfig
+source "arch/powerpc/platforms/40x/Kconfig"
 
 config PPC_NATIVE
        bool
@@ -83,6 +83,10 @@ config XICS
        bool
        default y
 
+config IPIC
+       bool
+       default n
+
 config MPIC
        bool
        default n
@@ -120,10 +124,10 @@ config RTAS_FLASH
 
 config PPC_PMI
        tristate "Support for PMI"
-       depends PPC_IBM_CELL_BLADE
+       depends on PPC_IBM_CELL_BLADE
        help
          PMI (Platform Management Interrupt) is a way to
-         communicate with the BMC (Baseboard Mangement Controller).
+         communicate with the BMC (Baseboard Management Controller).
          It is used in some IBM Cell blades.
        default m
 
@@ -136,6 +140,16 @@ config MPIC_U3_HT_IRQS
        depends on PPC_MAPLE
        default y
 
+config MPIC_BROKEN_REGREAD
+       bool
+       depends on MPIC
+       help
+         This option enables a MPIC driver workaround for some chips
+         that have a bug that causes some interrupt source information
+         to not read back properly. It is safe to use on other chips as
+         well, but enabling it uses about 8KB of memory to keep copies
+         of the register contents in software.
+
 config IBMVIO
        depends on PPC_PSERIES || PPC_ISERIES
        bool
@@ -257,6 +271,8 @@ config TAU_AVERAGE
 
 config QUICC_ENGINE
        bool
+       select PPC_LIB_RHEAP
+       select CRC32
        help
          The QUICC Engine (QE) is a new generation of communications
          coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
@@ -264,14 +280,27 @@ config QUICC_ENGINE
          for a machine with a QE coprocessor.
 
 config CPM2
-       bool
-       default n
+       bool "Enable support for the CPM2 (Communications Processor Module)"
+       depends on MPC85xx || 8260
+       select CPM
+       select PPC_LIB_RHEAP
        help
          The CPM2 (Communications Processor Module) is a coprocessor on
          embedded CPUs made by Freescale.  Selecting this option means that
          you wish to build a kernel for a machine with a CPM2 coprocessor
          on it (826x, 827x, 8560).
 
+config PPC_CPM_NEW_BINDING
+       bool
+       depends on CPM1 || CPM2
+       help
+         Select this if your board has been converted to use the new
+         device tree bindings for CPM, and no longer needs the
+         ioport callbacks or the platform device glue code.
+
+         The fs_enet and cpm_uart drivers will be built as
+         of_platform devices.
+
 config AXON_RAM
        tristate "Axon DDR2 memory device driver"
        depends on PPC_IBM_CELL_BLADE
@@ -291,4 +320,15 @@ config FSL_ULI1575
          Freescale reference boards. The boards all use the ULI in pretty
          much the same way.
 
+config CPM
+       bool
+
+config OF_RTC
+       bool
+       help
+         Uses information from the OF or flattened device tree to instatiate
+         platform devices for direct mapped RTC chips like the DS1742 or DS1743.
+
+source "arch/powerpc/sysdev/bestcomm/Kconfig"
+
 endmenu