#include <asm/hvcall.h>
#include <asm/iseries/lpar_map.h>
#include <asm/thread_info.h>
+#include <asm/firmware.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
#ifdef DO_SOFT_DISABLE
#define DISABLE_INTS \
+BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
li r11,0; \
std r10,SOFTE(r1); \
mfmsr r10; \
stb r11,PACAPROCENABLED(r13); \
ori r10,r10,MSR_EE; \
- mtmsrd r10,1
+ mtmsrd r10,1; \
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#define ENABLE_INTS \
+BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
mfmsr r11; \
std r10,SOFTE(r1); \
ori r11,r11,MSR_EE; \
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES); \
+BEGIN_FW_FTR_SECTION; \
+ ld r12,_MSR(r1); \
+ mfmsr r11; \
+ rlwimi r11,r12,0,MSR_EE; \
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
mtmsrd r11,1
#else /* hard enable/disable interrupts */
rlwimi r13,r12,16,0x20
mfcr r12
cmpwi r13,0x2c
- beq .do_stab_bolted_pSeries
+ beq do_stab_bolted_pSeries
mtcrf 0x80,r12
mfspr r12,SPRN_SPRG2
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
STD_EXCEPTION_PSERIES(., performance_monitor)
.align 7
-_GLOBAL(do_stab_bolted_pSeries)
+do_stab_bolted_pSeries:
mtcrf 0x80,r12
mfspr r12,SPRN_SPRG2
EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
li r5,0
std r4,_DAR(r1)
std r5,_DSISR(r1)
- b .handle_page_fault
+ b handle_page_fault
unrecov_user_slb:
EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
ld r11,PACALPPACAPTR(r13)
ld r11,LPPACASRR0(r11) /* get SRR0 value */
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
mtlr r10
.machine pop
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
.globl fp_unavailable_common
fp_unavailable_common:
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
- bne .load_up_fpu /* if from user, just load it up */
+ bne 1f /* if from user, just load it up */
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
ENABLE_INTS
bl .kernel_fp_unavailable_exception
BUG_OPCODE
+1: b .load_up_fpu
.align 7
.globl altivec_unavailable_common
std r4,_DSISR(r1)
andis. r0,r4,0xa450 /* weird error? */
- bne- .handle_page_fault /* if not, try to insert a HPTE */
+ bne- handle_page_fault /* if not, try to insert a HPTE */
BEGIN_FTR_SECTION
andis. r0,r4,0x0020 /* Is it a segment table fault? */
- bne- .do_ste_alloc /* If so handle it */
+ bne- do_ste_alloc /* If so handle it */
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
/*
cmpdi r3,0 /* see if hash_page succeeded */
#ifdef DO_SOFT_DISABLE
+BEGIN_FW_FTR_SECTION
/*
* If we had interrupts soft-enabled at the point where the
* DSI/ISI occurred, and an interrupt came in during hash_page,
* because ret_from_except_lite will check for and handle pending
* interrupts if necessary.
*/
- beq .ret_from_except_lite
+ beq 13f
/* For a hash failure, we don't bother re-enabling interrupts */
ble- 12f
ld r3,SOFTE(r1)
bl .local_irq_restore
b 11f
-#else
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif
+BEGIN_FW_FTR_SECTION
beq fast_exception_return /* Return from exception on success */
ble- 12f /* Failure return from hash_page */
/* fall through */
-#endif
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
/* Here we have a page fault that hash_page can't handle. */
-_GLOBAL(handle_page_fault)
+handle_page_fault:
ENABLE_INTS
11: ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_page_fault
cmpdi r3,0
- beq+ .ret_from_except_lite
+ beq+ 13f
bl .save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
bl .low_hash_fault
b .ret_from_except
+13: b .ret_from_except_lite
+
/* here we have a segment miss */
-_GLOBAL(do_ste_alloc)
+do_ste_alloc:
bl .ste_allocate /* try to insert stab entry */
cmpdi r3,0
- beq+ fast_exception_return
- b .handle_page_fault
+ bne- handle_page_fault
+ b fast_exception_return
/*
* r13 points to the PACA, r9 contains the saved CR,
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- LOAD_REG_IMMEDIATE(r3,cpu_specs)
- LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
- li r5,0
- bl .identify_cpu
-
LOAD_REG_IMMEDIATE(r2,__toc_start)
addi r2,r2,0x4000
addi r2,r2,0x4000
cmpwi r0,0x3c /* 970FX */
beq 1f
cmpwi r0,0x44 /* 970MP */
+ beq 1f
+ cmpwi r0,0x45 /* 970GX */
bne 2f
1: bl .__cpu_preinit_ppc970
2:
LOAD_REG_ADDR(r3, .start_secondary_prolog)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
#ifdef DO_SOFT_DISABLE
+BEGIN_FW_FTR_SECTION
ori r4,r4,MSR_EE
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
addi r2,r2,0x4000
add r2,r2,r26
- LOAD_REG_IMMEDIATE(r3, cpu_specs)
- add r3,r3,r26
- LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
- add r4,r4,r26
- mr r5,r26
- bl .identify_cpu
-
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- /* Apply the CPUs-specific fixups (nop out sections not relevant
- * to this CPU
- */
- li r3,0
- bl .do_cpu_ftr_fixups
-
/* ptr to current */
LOAD_REG_IMMEDIATE(r4, init_task)
std r4,PACACURRENT(r13)
/* Load up the kernel context */
5:
#ifdef DO_SOFT_DISABLE
+BEGIN_FW_FTR_SECTION
li r5,0
stb r5,PACAPROCENABLED(r13) /* Soft Disabled */
mfmsr r5
ori r5,r5,MSR_EE /* Hard Enabled */
mtmsrd r5
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
bl .start_kernel