* option) any later version.
*/
-/*
- * WARNING: Do not depend on this tree layout remaining static just yet.
- * The MPC5200 device tree conventions are still in flux
- * Keep an eye on the linuxppc-dev mailing list for more details
- */
+/dts-v1/;
/ {
model = "schindler,cm5200";
compatible = "schindler,cm5200";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <20>;
- i-cache-line-size = <20>;
- d-cache-size = <4000>; // L1, 16K
- i-cache-size = <4000>; // L1, 16K
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
memory {
device_type = "memory";
- reg = <00000000 04000000>; // 64MB
+ reg = <0x00000000 0x04000000>; // 64MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
- ranges = <0 f0000000 0000c000>;
- reg = <f0000000 00000100>;
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <200 38>;
+ reg = <0x200 0x38>;
};
- mpc5200_pic: pic@500 {
+ mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <500 80>;
+ reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <600 10>;
+ reg = <0x600 0x10>;
interrupts = <1 9 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <610 10>;
- interrupts = <1 a 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <620 10>;
- interrupts = <1 b 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <630 10>;
- interrupts = <1 c 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <640 10>;
- interrupts = <1 d 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <650 10>;
- interrupts = <1 e 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <660 10>;
- interrupts = <1 f 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <670 10>;
- interrupts = <1 10 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- reg = <800 100>;
+ reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
- gpio@b00 {
+ gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <b00 40>;
+ reg = <0xb00 0x40>;
interrupts = <1 7 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
- gpio@c00 {
+ gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <c00 40>;
+ reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <f00 20>;
- interrupts = <2 d 0 2 e 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <1000 ff>;
+ reg = <0x1000 0xff>;
interrupts = <2 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <1200 80>;
+ reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 a 0 3 b 0
- 3 c 0 3 d 0 3 e 0 3 f 0>;
- interrupt-parent = <&mpc5200_pic>;
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <1f00 100>;
+ reg = <0x1f00 0x100>;
};
serial@2000 { // PSC1
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <0>; // Logical port assignment
- reg = <2000 100>;
+ reg = <0x2000 0x100>;
interrupts = <2 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2200 { // PSC2
- device_type = "serial";
- compatible = "fsl,mpc5200-psc-uart";
- port-number = <1>; // Logical port assignment
- reg = <2200 100>;
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2200 0x100>;
interrupts = <2 2 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2400 { // PSC3
- device_type = "serial";
- compatible = "fsl,mpc5200-psc-uart";
- port-number = <2>; // Logical port assignment
- reg = <2400 100>;
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2400 0x100>;
interrupts = <2 3 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2c00 { // PSC6
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <5>; // Logical port assignment
- reg = <2c00 100>;
+ reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
- interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <3000 400>;
+ reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
- interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
reg = <0>;
};
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <3d40 40>;
- interrupts = <2 10 0>;
- interrupt-parent = <&mpc5200_pic>;
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <8000 4000>;
+ reg = <0x8000 0x4000>;
};
};
- lpb {
- model = "fsl,lpb";
- compatible = "fsl,lpb";
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0 0 fc000000 2000000>;
+ ranges = <0 0 0xfc000000 0x2000000>;
// 16-bit flash device at LocalPlus Bus CS0
flash@0,0 {
compatible = "cfi-flash";
- reg = <0 0 2000000>;
+ reg = <0 0 0x2000000>;
bank-width = <2>;
device-width = <2>;
#size-cells = <1>;
git.samba.org / sfrench / cifs-2.6.git / blobdiff