Merge branch 'for-linus' of git://neil.brown.name/md

[sfrench/cifs-2.6.git] / arch / mips / sibyte / bcm1480 / irq.c

diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index e28d626255a3bebd0d6a620eb413c1d185835c1d..a35818ed42639c8548537546d82eae9f35f23674 100644 (file)
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-       kgdb_flag = 0;
-       return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
        .name = "BCM1480-IMR",
        .ack = ack_bcm1480_irq,
@@ -355,75 +331,12 @@ void __init arch_init_irq(void)
         * does its own management of IP7.
         */
 
-#ifdef CONFIG_KGDB
-       imask |= STATUSF_IP6;
-#endif
        /* Enable necessary IPs, disable the rest */
        change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-       if (kgdb_flag) {
-               kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-               sb1250_duart_present[kgdb_port] = 0;
-#endif
-               /* Setup uart 1 settings, mapper */
-               /* QQQ FIXME */
-               __raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
-
-               __raw_writeq(IMR_IP6_VAL,
-                            IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-                            (kgdb_irq<<3));
-               bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-               register_gdb_console();
-#endif
-               printk("Waiting for GDB on UART port %d\n", kgdb_port);
-               set_debug_traps();
-               breakpoint();
-       }
-#endif
 }
 
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-       /*
-        * Clear break-change status (allow some time for the remote
-        * host to stop the break, since we would see another
-        * interrupt on the end-of-break too)
-        */
-       kstat.irqs[smp_processor_id()][kgdb_irq]++;
-       mdelay(500);
-       duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-                               M_DUART_RX_EN | M_DUART_TX_EN);
-       set_async_breakpoint(&get_irq_regs()->cp0_epc);
-}
-
-#endif         /* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
-static inline void dispatch_ip4(void)
-{
-       int cpu = smp_processor_id();
-       int irq = K_BCM1480_INT_TIMER_0 + cpu;
-
-       /* Reset the timer */
-       __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
-                   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-       do_IRQ(irq);
-}
-
 static inline void dispatch_ip2(void)
 {
        unsigned long long mask_h, mask_l;
@@ -451,6 +364,7 @@ static inline void dispatch_ip2(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
+       unsigned int cpu = smp_processor_id();
        unsigned int pending;
 
 #ifdef CONFIG_SIBYTE_BCM1480_PROF
@@ -467,17 +381,12 @@ asmlinkage void plat_irq_dispatch(void)
 #endif
 
        if (pending & CAUSEF_IP4)
-               dispatch_ip4();
+               do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
 #ifdef CONFIG_SMP
        else if (pending & CAUSEF_IP3)
                bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-       else if (pending & CAUSEF_IP6)
-               bcm1480_kgdb_interrupt();               /* KGDB (uart 1) */
-#endif
-
        else if (pending & CAUSEF_IP2)
                dispatch_ip2();
 }