MIPS: PowerTV: Separate PowerTV USB support from non-USB code
[sfrench/cifs-2.6.git] / arch / mips / powertv / asic / asic_devices.c
index 095a887df39c8515339dc49a0d60be2bcf8d5041..e56fa61b39916a8e869350f715ee4d169c37f122 100644 (file)
@@ -33,7 +33,6 @@
 #include <linux/mm.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
-#include <linux/gfp.h>
 #include <asm/page.h>
 #include <linux/swap.h>
 #include <linux/highmem.h>
@@ -68,7 +67,6 @@ unsigned long asic_phy_base;
 unsigned long asic_base;
 EXPORT_SYMBOL(asic_base);                      /* Exported for testing */
 struct resource *gp_resources;
-static bool usb_configured;
 
 /*
  * Don't recommend to use it directly, it is usually used by kernel internally.
@@ -90,102 +88,20 @@ struct resource asic_resource = {
        .flags = IORESOURCE_MEM,
 };
 
-/*
- *
- * USB Host Resource Definition
- *
- */
-
-static struct resource ehci_resources[] = {
-       {
-               .parent = &asic_resource,
-               .start  = 0,
-               .end    = 0xff,
-               .flags  = IORESOURCE_MEM,
-       },
-       {
-               .start  = irq_usbehci,
-               .end    = irq_usbehci,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ehci_device = {
-       .name = "powertv-ehci",
-       .id = 0,
-       .num_resources = 2,
-       .resource = ehci_resources,
-       .dev = {
-               .dma_mask = &ehci_dmamask,
-               .coherent_dma_mask = DMA_BIT_MASK(32),
-       },
-};
-
-static struct resource ohci_resources[] = {
-       {
-               .parent = &asic_resource,
-               .start  = 0,
-               .end    = 0xff,
-               .flags  = IORESOURCE_MEM,
-       },
-       {
-               .start  = irq_usbohci,
-               .end    = irq_usbohci,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ohci_device = {
-       .name = "powertv-ohci",
-       .id = 0,
-       .num_resources = 2,
-       .resource = ohci_resources,
-       .dev = {
-               .dma_mask = &ohci_dmamask,
-               .coherent_dma_mask = DMA_BIT_MASK(32),
-       },
-};
-
-static struct platform_device *platform_devices[] = {
-       &ehci_device,
-       &ohci_device,
-};
-
-/*
- *
- * Platform Configuration and Device Initialization
- *
- */
-static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3)
-{
-       int en_prg, byp, pwr, nsb, val;
-       int sout;
-
-       sout = 1;
-       en_prg = 1;
-       byp = 0;
-       nsb = 1;
-       pwr = 1;
-
-       val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) |
-               (nsb<<1) | (disable_div_by_3<<5));
-
-       asic_write(val, fs432x4b4_usb_ctl);
-       asic_write(val | (en_prg<<4), fs432x4b4_usb_ctl);
-       asic_write(val | (en_prg<<4) | pwr, fs432x4b4_usb_ctl);
-}
-
 /*
  * Allow override of bootloader-specified model
+ * Returns zero on success, a negative errno value on failure.  This parameter
+ * allows overriding of the bootloader-specified model.
  */
 static char __initdata cmdline[COMMAND_LINE_SIZE];
 
 #define        FORCEFAMILY_PARAM       "forcefamily"
 
+/*
+ * check_forcefamily - check for, and parse, forcefamily command line parameter
+ * @forced_family:     Pointer to two-character array in which to store the
+ *                     value of the forcedfamily parameter, if any.
+ */
 static __init int check_forcefamily(unsigned char forced_family[2])
 {
        const char *p;
@@ -225,14 +141,10 @@ static __init int check_forcefamily(unsigned char forced_family[2])
  */
 static __init noinline void platform_set_family(void)
 {
-#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
-
        unsigned char forced_family[2];
        unsigned short bootldr_family;
 
-       check_forcefamily(forced_family);
-
-       if (forced_family[0] != '\0' && forced_family[1] != '\0')
+       if (check_forcefamily(forced_family) == 0)
                bootldr_family = BOOTLDRFAMILY(forced_family[0],
                        forced_family[1]);
        else {
@@ -297,25 +209,10 @@ unsigned int platform_get_family(void)
 }
 EXPORT_SYMBOL(platform_get_family);
 
-/*
- * \brief usb_eye_configure() for optimizing the USB eye on Calliope.
- *
- * \param     unsigned int value saved to the register.
- *
- * \return    none
- *
- */
-static void __init usb_eye_configure(unsigned int value)
-{
-       asic_write(asic_read(crt_spare) | value, crt_spare);
-}
-
 /*
  * platform_get_asic - determine the ASIC type.
  *
- * \param     none
- *
- * \return    ASIC type; ASIC_UNKNOWN if none
+ * Returns the ASIC type, or ASIC_UNKNOWN if unknown
  *
  */
 enum asic_type platform_get_asic(void)
@@ -325,93 +222,10 @@ enum asic_type platform_get_asic(void)
 EXPORT_SYMBOL(platform_get_asic);
 
 /*
- * platform_configure_usb - usb configuration based on platform type.
- * @bcm1_usb2_ctl:     value for the BCM1_USB2_CTL register, which is
- *                     quirky
- */
-static void __init platform_configure_usb(void)
-{
-       u32 bcm1_usb2_ctl;
-
-       if (usb_configured)
-               return;
-
-       switch (asic) {
-       case ASIC_ZEUS:
-       case ASIC_CRONUS:
-       case ASIC_CRONUSLITE:
-               fs_update(0x0000, 0x11, 0x02, 0);
-               bcm1_usb2_ctl = 0x803;
-               break;
-
-       case ASIC_CALLIOPE:
-               fs_update(0x0000, 0x11, 0x02, 1);
-
-               switch (platform_family) {
-               case FAMILY_1500VZE:
-                       break;
-
-               case FAMILY_1500VZF:
-                       usb_eye_configure(0x003c0000);
-                       break;
-
-               default:
-                       usb_eye_configure(0x00300000);
-                       break;
-               }
-
-               bcm1_usb2_ctl = 0x803;
-               break;
-
-       default:
-               pr_err("Unknown ASIC type: %d\n", asic);
-               break;
-       }
-
-       /* turn on USB power */
-       asic_write(0, usb2_strap);
-       /* Enable all OHCI interrupts */
-       asic_write(bcm1_usb2_ctl, usb2_control);
-       /* USB2_STBUS_OBC store32/load32 */
-       asic_write(3, usb2_stbus_obc);
-       /* USB2_STBUS_MESS_SIZE 2 packets */
-       asic_write(1, usb2_stbus_mess_size);
-       /* USB2_STBUS_CHUNK_SIZE 2 packets */
-       asic_write(1, usb2_stbus_chunk_size);
-
-       usb_configured = true;
-}
-
-/*
- * Set up the USB EHCI interface
- */
-void platform_configure_usb_ehci()
-{
-       platform_configure_usb();
-}
-
-/*
- * Set up the USB OHCI interface
- */
-void platform_configure_usb_ohci()
-{
-       platform_configure_usb();
-}
-
-/*
- * Shut the USB EHCI interface down--currently a NOP
+ * set_register_map - set ASIC register configuration
+ * @phys_base: Physical address of the base of the ASIC registers
+ * @map:       Description of key ASIC registers
  */
-void platform_unconfigure_usb_ehci()
-{
-}
-
-/*
- * Shut the USB OHCI interface down--currently a NOP
- */
-void platform_unconfigure_usb_ohci()
-{
-}
-
 static void __init set_register_map(unsigned long phys_base,
        const struct register_map *map)
 {
@@ -560,34 +374,8 @@ void __init configure_platform(void)
        }
 }
 
-/**
- * platform_devices_init - sets up USB device resourse.
- */
-static int __init platform_devices_init(void)
-{
-       pr_notice("%s: ----- Initializing USB resources -----\n", __func__);
-
-       asic_resource.start = asic_phy_base;
-       asic_resource.end += asic_resource.start;
-
-       ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
-       ehci_resources[0].end += ehci_resources[0].start;
-
-       ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
-       ohci_resources[0].end += ohci_resources[0].start;
-
-       set_io_port_base(0);
-
-       platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-       return 0;
-}
-
-arch_initcall(platform_devices_init);
-
 /*
- *
- * BOOTMEM ALLOCATION
+ * RESOURCE ALLOCATION
  *
  */
 /*