#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/vt_kern.h>
+#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/setup.h>
#include <asm/io.h>
u_long atari_mch_cookie;
+EXPORT_SYMBOL(atari_mch_cookie);
+
u_long atari_mch_type;
+EXPORT_SYMBOL(atari_mch_type);
+
struct atari_hw_present atari_hw_present;
+EXPORT_SYMBOL(atari_hw_present);
+
u_long atari_switches;
+EXPORT_SYMBOL(atari_switches);
+
int atari_dont_touch_floppy_select;
+EXPORT_SYMBOL(atari_dont_touch_floppy_select);
+
int atari_rtc_year_offset;
/* local function prototypes */
-static void atari_reset( void );
+static void atari_reset(void);
static void atari_get_model(char *model);
static int atari_get_hardware_list(char *buffer);
/* atari specific irq functions */
extern void atari_init_IRQ (void);
-extern void atari_mksound( unsigned int count, unsigned int ticks );
+extern void atari_mksound(unsigned int count, unsigned int ticks);
#ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on );
+static void atari_heartbeat(int on);
#endif
/* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irq_handler_t );
+extern void atari_sched_init(irq_handler_t);
extern unsigned long atari_gettimeoffset (void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
extern int atari_mste_set_clock_mmss (unsigned long);
extern int atari_tt_set_clock_mmss (unsigned long);
-/* atari specific debug functions (in debug.c) */
-extern void atari_debug_init(void);
-
-
-/* I've moved hwreg_present() and hwreg_present_bywrite() out into
- * mm/hwtest.c, to avoid having multiple copies of the same routine
- * in the kernel [I wanted them in hp300 and they were already used
- * in the nubus code. NB: I don't have an Atari so this might (just
- * conceivably) break something.
- * I've preserved the #if 0 version of hwreg_present_bywrite() here
- * for posterity.
- * -- Peter Maydell <pmaydell@chiark.greenend.org.uk>, 05/1998
- */
-
-#if 0
-static int __init
-hwreg_present_bywrite(volatile void *regp, unsigned char val)
-{
- int ret;
- long save_sp, save_vbr;
- static long tmp_vectors[3] = { [2] = (long)&&after_test };
-
- __asm__ __volatile__
- ( "movec %/vbr,%2\n\t" /* save vbr value */
- "movec %4,%/vbr\n\t" /* set up temporary vectors */
- "movel %/sp,%1\n\t" /* save sp */
- "moveq #0,%0\n\t" /* assume not present */
- "moveb %5,%3@\n\t" /* write the hardware reg */
- "cmpb %3@,%5\n\t" /* compare it */
- "seq %0" /* comes here only if reg */
- /* is present */
- : "=d&" (ret), "=r&" (save_sp), "=r&" (save_vbr)
- : "a" (regp), "r" (tmp_vectors), "d" (val)
- );
- after_test:
- __asm__ __volatile__
- ( "movel %0,%/sp\n\t" /* restore sp */
- "movec %1,%/vbr" /* restore vbr */
- : : "r" (save_sp), "r" (save_vbr) : "sp"
- );
-
- return( ret );
-}
-#endif
-
/* ++roman: This is a more elaborate test for an SCC chip, since the plain
* Medusa board generates DTACK at the SCC's standard addresses, but a SCC
* should be readable without trouble (from channel A!).
*/
-static int __init scc_test( volatile char *ctla )
+static int __init scc_test(volatile char *ctla)
{
- if (!hwreg_present( ctla ))
- return( 0 );
+ if (!hwreg_present(ctla))
+ return 0;
MFPDELAY();
- *ctla = 2; MFPDELAY();
- *ctla = 0x40; MFPDELAY();
+ *ctla = 2;
+ MFPDELAY();
+ *ctla = 0x40;
+ MFPDELAY();
- *ctla = 2; MFPDELAY();
- if (*ctla != 0x40) return( 0 );
+ *ctla = 2;
+ MFPDELAY();
+ if (*ctla != 0x40)
+ return 0;
MFPDELAY();
- *ctla = 2; MFPDELAY();
- *ctla = 0x60; MFPDELAY();
+ *ctla = 2;
+ MFPDELAY();
+ *ctla = 0x60;
+ MFPDELAY();
- *ctla = 2; MFPDELAY();
- if (*ctla != 0x60) return( 0 );
+ *ctla = 2;
+ MFPDELAY();
+ if (*ctla != 0x60)
+ return 0;
- return( 1 );
+ return 1;
}
int __init atari_parse_bootinfo(const struct bi_record *record)
{
- int unknown = 0;
- const u_long *data = record->data;
+ int unknown = 0;
+ const u_long *data = record->data;
- switch (record->tag) {
+ switch (record->tag) {
case BI_ATARI_MCH_COOKIE:
- atari_mch_cookie = *data;
- break;
+ atari_mch_cookie = *data;
+ break;
case BI_ATARI_MCH_TYPE:
- atari_mch_type = *data;
- break;
+ atari_mch_type = *data;
+ break;
default:
- unknown = 1;
- }
- return(unknown);
+ unknown = 1;
+ break;
+ }
+ return unknown;
}
/* Parse the Atari-specific switches= option. */
-void __init atari_switches_setup( const char *str, unsigned len )
+static int __init atari_switches_setup(char *str)
{
- char switches[len+1];
- char *p;
- int ovsc_shift;
- char *args = switches;
-
- /* copy string to local array, strsep works destructively... */
- strlcpy( switches, str, sizeof(switches) );
- atari_switches = 0;
-
- /* parse the options */
- while ((p = strsep(&args, ",")) != NULL) {
- if (!*p) continue;
- ovsc_shift = 0;
- if (strncmp( p, "ov_", 3 ) == 0) {
- p += 3;
- ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
- }
-
- if (strcmp( p, "ikbd" ) == 0) {
- /* RTS line of IKBD ACIA */
- atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
- }
- else if (strcmp( p, "midi" ) == 0) {
- /* RTS line of MIDI ACIA */
- atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+ char switches[strlen(str) + 1];
+ char *p;
+ int ovsc_shift;
+ char *args = switches;
+
+ if (!MACH_IS_ATARI)
+ return 0;
+
+ /* copy string to local array, strsep works destructively... */
+ strcpy(switches, str);
+ atari_switches = 0;
+
+ /* parse the options */
+ while ((p = strsep(&args, ",")) != NULL) {
+ if (!*p)
+ continue;
+ ovsc_shift = 0;
+ if (strncmp(p, "ov_", 3) == 0) {
+ p += 3;
+ ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
+ }
+
+ if (strcmp(p, "ikbd") == 0) {
+ /* RTS line of IKBD ACIA */
+ atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
+ } else if (strcmp(p, "midi") == 0) {
+ /* RTS line of MIDI ACIA */
+ atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+ } else if (strcmp(p, "snd6") == 0) {
+ atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
+ } else if (strcmp(p, "snd7") == 0) {
+ atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
+ }
}
- else if (strcmp( p, "snd6" ) == 0) {
- atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
- }
- else if (strcmp( p, "snd7" ) == 0) {
- atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
- }
- }
+ return 0;
}
+early_param("switches", atari_switches_setup);
+
/*
* Setup the Atari configuration info
void __init config_atari(void)
{
- unsigned short tos_version;
-
- memset(&atari_hw_present, 0, sizeof(atari_hw_present));
+ unsigned short tos_version;
- atari_debug_init();
+ memset(&atari_hw_present, 0, sizeof(atari_hw_present));
- ioport_resource.end = 0xFFFFFFFF; /* Change size of I/O space from 64KB
- to 4GB. */
+ /* Change size of I/O space from 64KB to 4GB. */
+ ioport_resource.end = 0xFFFFFFFF;
- mach_sched_init = atari_sched_init;
- mach_init_IRQ = atari_init_IRQ;
- mach_get_model = atari_get_model;
- mach_get_hardware_list = atari_get_hardware_list;
- mach_gettimeoffset = atari_gettimeoffset;
- mach_reset = atari_reset;
- mach_max_dma_address = 0xffffff;
+ mach_sched_init = atari_sched_init;
+ mach_init_IRQ = atari_init_IRQ;
+ mach_get_model = atari_get_model;
+ mach_get_hardware_list = atari_get_hardware_list;
+ mach_gettimeoffset = atari_gettimeoffset;
+ mach_reset = atari_reset;
+ mach_max_dma_address = 0xffffff;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
- mach_beep = atari_mksound;
+ mach_beep = atari_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
- mach_heartbeat = atari_heartbeat;
+ mach_heartbeat = atari_heartbeat;
#endif
- /* Set switches as requested by the user */
- if (atari_switches & ATARI_SWITCH_IKBD)
- acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
- if (atari_switches & ATARI_SWITCH_MIDI)
- acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
- if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
- sound_ym.rd_data_reg_sel = 14;
- sound_ym.wd_data = sound_ym.rd_data_reg_sel |
- ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
- ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
- }
-
- /* ++bjoern:
- * Determine hardware present
- */
+ /* Set switches as requested by the user */
+ if (atari_switches & ATARI_SWITCH_IKBD)
+ acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
+ if (atari_switches & ATARI_SWITCH_MIDI)
+ acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
+ if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
+ sound_ym.rd_data_reg_sel = 14;
+ sound_ym.wd_data = sound_ym.rd_data_reg_sel |
+ ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
+ ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
+ }
- printk( "Atari hardware found: " );
- if (MACH_IS_MEDUSA || MACH_IS_HADES) {
- /* There's no Atari video hardware on the Medusa, but all the
- * addresses below generate a DTACK so no bus error occurs! */
- }
- else if (hwreg_present( f030_xreg )) {
- ATARIHW_SET(VIDEL_SHIFTER);
- printk( "VIDEL " );
- /* This is a temporary hack: If there is Falcon video
- * hardware, we assume that the ST-DMA serves SCSI instead of
- * ACSI. In the future, there should be a better method for
- * this...
- */
- ATARIHW_SET(ST_SCSI);
- printk( "STDMA-SCSI " );
- }
- else if (hwreg_present( tt_palette )) {
- ATARIHW_SET(TT_SHIFTER);
- printk( "TT_SHIFTER " );
- }
- else if (hwreg_present( &shifter.bas_hi )) {
- if (hwreg_present( &shifter.bas_lo ) &&
- (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
- ATARIHW_SET(EXTD_SHIFTER);
- printk( "EXTD_SHIFTER " );
- }
- else {
- ATARIHW_SET(STND_SHIFTER);
- printk( "STND_SHIFTER " );
- }
- }
- if (hwreg_present( &mfp.par_dt_reg )) {
- ATARIHW_SET(ST_MFP);
- printk( "ST_MFP " );
- }
- if (hwreg_present( &tt_mfp.par_dt_reg )) {
- ATARIHW_SET(TT_MFP);
- printk( "TT_MFP " );
- }
- if (hwreg_present( &tt_scsi_dma.dma_addr_hi )) {
- ATARIHW_SET(SCSI_DMA);
- printk( "TT_SCSI_DMA " );
- }
- if (!MACH_IS_HADES && hwreg_present( &st_dma.dma_hi )) {
- ATARIHW_SET(STND_DMA);
- printk( "STND_DMA " );
- }
- if (MACH_IS_MEDUSA || /* The ST-DMA address registers aren't readable
- * on all Medusas, so the test below may fail */
- (hwreg_present( &st_dma.dma_vhi ) &&
- (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
- st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
- (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
- st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
- ATARIHW_SET(EXTD_DMA);
- printk( "EXTD_DMA " );
- }
- if (hwreg_present( &tt_scsi.scsi_data )) {
- ATARIHW_SET(TT_SCSI);
- printk( "TT_SCSI " );
- }
- if (hwreg_present( &sound_ym.rd_data_reg_sel )) {
- ATARIHW_SET(YM_2149);
- printk( "YM2149 " );
- }
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present( &tt_dmasnd.ctrl )) {
- ATARIHW_SET(PCM_8BIT);
- printk( "PCM " );
- }
- if (!MACH_IS_HADES && hwreg_present( &falcon_codec.unused5 )) {
- ATARIHW_SET(CODEC);
- printk( "CODEC " );
- }
- if (hwreg_present( &dsp56k_host_interface.icr )) {
- ATARIHW_SET(DSP56K);
- printk( "DSP56K " );
- }
- if (hwreg_present( &tt_scc_dma.dma_ctrl ) &&
+ /* ++bjoern:
+ * Determine hardware present
+ */
+
+ printk("Atari hardware found: ");
+ if (MACH_IS_MEDUSA || MACH_IS_HADES) {
+ /* There's no Atari video hardware on the Medusa, but all the
+ * addresses below generate a DTACK so no bus error occurs! */
+ } else if (hwreg_present(f030_xreg)) {
+ ATARIHW_SET(VIDEL_SHIFTER);
+ printk("VIDEL ");
+ /* This is a temporary hack: If there is Falcon video
+ * hardware, we assume that the ST-DMA serves SCSI instead of
+ * ACSI. In the future, there should be a better method for
+ * this...
+ */
+ ATARIHW_SET(ST_SCSI);
+ printk("STDMA-SCSI ");
+ } else if (hwreg_present(tt_palette)) {
+ ATARIHW_SET(TT_SHIFTER);
+ printk("TT_SHIFTER ");
+ } else if (hwreg_present(&shifter.bas_hi)) {
+ if (hwreg_present(&shifter.bas_lo) &&
+ (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
+ ATARIHW_SET(EXTD_SHIFTER);
+ printk("EXTD_SHIFTER ");
+ } else {
+ ATARIHW_SET(STND_SHIFTER);
+ printk("STND_SHIFTER ");
+ }
+ }
+ if (hwreg_present(&mfp.par_dt_reg)) {
+ ATARIHW_SET(ST_MFP);
+ printk("ST_MFP ");
+ }
+ if (hwreg_present(&tt_mfp.par_dt_reg)) {
+ ATARIHW_SET(TT_MFP);
+ printk("TT_MFP ");
+ }
+ if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
+ ATARIHW_SET(SCSI_DMA);
+ printk("TT_SCSI_DMA ");
+ }
+ if (!MACH_IS_HADES && hwreg_present(&st_dma.dma_hi)) {
+ ATARIHW_SET(STND_DMA);
+ printk("STND_DMA ");
+ }
+ /*
+ * The ST-DMA address registers aren't readable
+ * on all Medusas, so the test below may fail
+ */
+ if (MACH_IS_MEDUSA ||
+ (hwreg_present(&st_dma.dma_vhi) &&
+ (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
+ st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
+ (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
+ st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
+ ATARIHW_SET(EXTD_DMA);
+ printk("EXTD_DMA ");
+ }
+ if (hwreg_present(&tt_scsi.scsi_data)) {
+ ATARIHW_SET(TT_SCSI);
+ printk("TT_SCSI ");
+ }
+ if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
+ ATARIHW_SET(YM_2149);
+ printk("YM2149 ");
+ }
+ if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+ hwreg_present(&tt_dmasnd.ctrl)) {
+ ATARIHW_SET(PCM_8BIT);
+ printk("PCM ");
+ }
+ if (!MACH_IS_HADES && hwreg_present(&falcon_codec.unused5)) {
+ ATARIHW_SET(CODEC);
+ printk("CODEC ");
+ }
+ if (hwreg_present(&dsp56k_host_interface.icr)) {
+ ATARIHW_SET(DSP56K);
+ printk("DSP56K ");
+ }
+ if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
#if 0
- /* This test sucks! Who knows some better? */
- (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
- (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
+ /* This test sucks! Who knows some better? */
+ (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
+ (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
#else
- !MACH_IS_MEDUSA && !MACH_IS_HADES
+ !MACH_IS_MEDUSA && !MACH_IS_HADES
#endif
- ) {
- ATARIHW_SET(SCC_DMA);
- printk( "SCC_DMA " );
- }
- if (scc_test( &scc.cha_a_ctrl )) {
- ATARIHW_SET(SCC);
- printk( "SCC " );
- }
- if (scc_test( &st_escc.cha_b_ctrl )) {
- ATARIHW_SET( ST_ESCC );
- printk( "ST_ESCC " );
- }
- if (MACH_IS_HADES)
- {
- ATARIHW_SET( VME );
- printk( "VME " );
- }
- else if (hwreg_present( &tt_scu.sys_mask )) {
- ATARIHW_SET(SCU);
- /* Assume a VME bus if there's a SCU */
- ATARIHW_SET( VME );
- printk( "VME SCU " );
- }
- if (hwreg_present( (void *)(0xffff9210) )) {
- ATARIHW_SET(ANALOG_JOY);
- printk( "ANALOG_JOY " );
- }
- if (!MACH_IS_HADES && hwreg_present( blitter.halftone )) {
- ATARIHW_SET(BLITTER);
- printk( "BLITTER " );
- }
- if (hwreg_present((void *)0xfff00039)) {
- ATARIHW_SET(IDE);
- printk( "IDE " );
- }
+ ) {
+ ATARIHW_SET(SCC_DMA);
+ printk("SCC_DMA ");
+ }
+ if (scc_test(&scc.cha_a_ctrl)) {
+ ATARIHW_SET(SCC);
+ printk("SCC ");
+ }
+ if (scc_test(&st_escc.cha_b_ctrl)) {
+ ATARIHW_SET(ST_ESCC);
+ printk("ST_ESCC ");
+ }
+ if (MACH_IS_HADES) {
+ ATARIHW_SET(VME);
+ printk("VME ");
+ } else if (hwreg_present(&tt_scu.sys_mask)) {
+ ATARIHW_SET(SCU);
+ /* Assume a VME bus if there's a SCU */
+ ATARIHW_SET(VME);
+ printk("VME SCU ");
+ }
+ if (hwreg_present((void *)(0xffff9210))) {
+ ATARIHW_SET(ANALOG_JOY);
+ printk("ANALOG_JOY ");
+ }
+ if (!MACH_IS_HADES && hwreg_present(blitter.halftone)) {
+ ATARIHW_SET(BLITTER);
+ printk("BLITTER ");
+ }
+ if (hwreg_present((void *)0xfff00039)) {
+ ATARIHW_SET(IDE);
+ printk("IDE ");
+ }
#if 1 /* This maybe wrong */
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present( &tt_microwire.data ) &&
- hwreg_present( &tt_microwire.mask ) &&
- (tt_microwire.mask = 0x7ff,
- udelay(1),
- tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
- udelay(1),
- tt_microwire.data != 0)) {
- ATARIHW_SET(MICROWIRE);
- while (tt_microwire.mask != 0x7ff) ;
- printk( "MICROWIRE " );
- }
+ if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+ hwreg_present(&tt_microwire.data) &&
+ hwreg_present(&tt_microwire.mask) &&
+ (tt_microwire.mask = 0x7ff,
+ udelay(1),
+ tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
+ udelay(1),
+ tt_microwire.data != 0)) {
+ ATARIHW_SET(MICROWIRE);
+ while (tt_microwire.mask != 0x7ff)
+ ;
+ printk("MICROWIRE ");
+ }
#endif
- if (hwreg_present( &tt_rtc.regsel )) {
- ATARIHW_SET(TT_CLK);
- printk( "TT_CLK " );
- mach_hwclk = atari_tt_hwclk;
- mach_set_clock_mmss = atari_tt_set_clock_mmss;
- }
- if (!MACH_IS_HADES && hwreg_present( &mste_rtc.sec_ones)) {
- ATARIHW_SET(MSTE_CLK);
- printk( "MSTE_CLK ");
- mach_hwclk = atari_mste_hwclk;
- mach_set_clock_mmss = atari_mste_set_clock_mmss;
- }
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present( &dma_wd.fdc_speed ) &&
- hwreg_write( &dma_wd.fdc_speed, 0 )) {
- ATARIHW_SET(FDCSPEED);
- printk( "FDC_SPEED ");
- }
- if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
- ATARIHW_SET(ACSI);
- printk( "ACSI " );
- }
- printk("\n");
-
- if (CPU_IS_040_OR_060)
- /* Now it seems to be safe to turn of the tt0 transparent
- * translation (the one that must not be turned off in
- * head.S...)
- */
- __asm__ volatile ("moveq #0,%/d0\n\t"
- ".chip 68040\n\t"
- "movec %%d0,%%itt0\n\t"
- "movec %%d0,%%dtt0\n\t"
- ".chip 68k"
- : /* no outputs */
- : /* no inputs */
- : "d0");
-
- /* allocator for memory that must reside in st-ram */
- atari_stram_init ();
-
- /* Set up a mapping for the VMEbus address region:
- *
- * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
- * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
- * 0xfe000000 virt., because this can be done with a single
- * transparent translation. On the 68040, lots of often unused
- * page tables would be needed otherwise. On a MegaSTE or similar,
- * the highest byte is stripped off by hardware due to the 24 bit
- * design of the bus.
- */
+ if (hwreg_present(&tt_rtc.regsel)) {
+ ATARIHW_SET(TT_CLK);
+ printk("TT_CLK ");
+ mach_hwclk = atari_tt_hwclk;
+ mach_set_clock_mmss = atari_tt_set_clock_mmss;
+ }
+ if (!MACH_IS_HADES && hwreg_present(&mste_rtc.sec_ones)) {
+ ATARIHW_SET(MSTE_CLK);
+ printk("MSTE_CLK ");
+ mach_hwclk = atari_mste_hwclk;
+ mach_set_clock_mmss = atari_mste_set_clock_mmss;
+ }
+ if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+ hwreg_present(&dma_wd.fdc_speed) &&
+ hwreg_write(&dma_wd.fdc_speed, 0)) {
+ ATARIHW_SET(FDCSPEED);
+ printk("FDC_SPEED ");
+ }
+ if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
+ ATARIHW_SET(ACSI);
+ printk("ACSI ");
+ }
+ printk("\n");
+
+ if (CPU_IS_040_OR_060)
+ /* Now it seems to be safe to turn of the tt0 transparent
+ * translation (the one that must not be turned off in
+ * head.S...)
+ */
+ asm volatile ("\n"
+ " moveq #0,%%d0\n"
+ " .chip 68040\n"
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%dtt0\n"
+ " .chip 68k"
+ : /* no outputs */
+ : /* no inputs */
+ : "d0");
+
+ /* allocator for memory that must reside in st-ram */
+ atari_stram_init();
+
+ /* Set up a mapping for the VMEbus address region:
+ *
+ * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
+ * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
+ * 0xfe000000 virt., because this can be done with a single
+ * transparent translation. On the 68040, lots of often unused
+ * page tables would be needed otherwise. On a MegaSTE or similar,
+ * the highest byte is stripped off by hardware due to the 24 bit
+ * design of the bus.
+ */
+
+ if (CPU_IS_020_OR_030) {
+ unsigned long tt1_val;
+ tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache
+ * inhibit, read and write, FDC mask = 3,
+ * FDC val = 4 -> Supervisor only */
+ asm volatile ("\n"
+ " .chip 68030\n"
+ " pmove %0@,%/tt1\n"
+ " .chip 68k"
+ : : "a" (&tt1_val));
+ } else {
+ asm volatile ("\n"
+ " .chip 68040\n"
+ " movec %0,%%itt1\n"
+ " movec %0,%%dtt1\n"
+ " .chip 68k"
+ :
+ : "d" (0xfe00a040)); /* Translate 0xfexxxxxx, enable,
+ * supervisor only, non-cacheable/
+ * serialized, writable */
- if (CPU_IS_020_OR_030) {
- unsigned long tt1_val;
- tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache
- * inhibit, read and write, FDC mask = 3,
- * FDC val = 4 -> Supervisor only */
- __asm__ __volatile__ ( ".chip 68030\n\t"
- "pmove %0@,%/tt1\n\t"
- ".chip 68k"
- : : "a" (&tt1_val) );
- }
- else {
- __asm__ __volatile__
- ( "movel %0,%/d0\n\t"
- ".chip 68040\n\t"
- "movec %%d0,%%itt1\n\t"
- "movec %%d0,%%dtt1\n\t"
- ".chip 68k"
- :
- : "g" (0xfe00a040) /* Translate 0xfexxxxxx, enable,
- * supervisor only, non-cacheable/
- * serialized, writable */
- : "d0" );
-
- }
-
- /* Fetch tos version at Physical 2 */
- /* We my not be able to access this address if the kernel is
- loaded to st ram, since the first page is unmapped. On the
- Medusa this is always the case and there is nothing we can do
- about this, so we just assume the smaller offset. For the TT
- we use the fact that in head.S we have set up a mapping
- 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
- in the last 16MB of the address space. */
- tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
- 0xfff : *(unsigned short *)0xff000002;
- atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
+ }
+
+ /* Fetch tos version at Physical 2 */
+ /*
+ * We my not be able to access this address if the kernel is
+ * loaded to st ram, since the first page is unmapped. On the
+ * Medusa this is always the case and there is nothing we can do
+ * about this, so we just assume the smaller offset. For the TT
+ * we use the fact that in head.S we have set up a mapping
+ * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
+ * in the last 16MB of the address space.
+ */
+ tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
+ 0xfff : *(unsigned short *)0xff000002;
+ atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
}
#ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on )
+static void atari_heartbeat(int on)
{
- unsigned char tmp;
- unsigned long flags;
+ unsigned char tmp;
+ unsigned long flags;
- if (atari_dont_touch_floppy_select)
- return;
+ if (atari_dont_touch_floppy_select)
+ return;
- local_irq_save(flags);
- sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
- tmp = sound_ym.rd_data_reg_sel;
- sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
- local_irq_restore(flags);
+ local_irq_save(flags);
+ sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
+ tmp = sound_ym.rd_data_reg_sel;
+ sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
+ local_irq_restore(flags);
}
#endif
/* ++andreas: no need for complicated code, just depend on prefetch */
-static void atari_reset (void)
+static void atari_reset(void)
{
- long tc_val = 0;
- long reset_addr;
-
- /* On the Medusa, phys. 0x4 may contain garbage because it's no
- ROM. See above for explanation why we cannot use PTOV(4). */
- reset_addr = MACH_IS_HADES ? 0x7fe00030 :
- MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
- *(unsigned long *) 0xff000004;
-
- /* reset ACIA for switch off OverScan, if it's active */
- if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
- acia.key_ctrl = ACIA_RESET;
- if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
- acia.mid_ctrl = ACIA_RESET;
-
- /* processor independent: turn off interrupts and reset the VBR;
- * the caches must be left enabled, else prefetching the final jump
- * instruction doesn't work. */
- local_irq_disable();
- __asm__ __volatile__
- ("moveq #0,%/d0\n\t"
- "movec %/d0,%/vbr"
- : : : "d0" );
-
- if (CPU_IS_040_OR_060) {
- unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
- if (CPU_IS_060) {
- /* 68060: clear PCR to turn off superscalar operation */
- __asm__ __volatile__
- ("moveq #0,%/d0\n\t"
- ".chip 68060\n\t"
- "movec %%d0,%%pcr\n\t"
- ".chip 68k"
- : : : "d0" );
- }
-
- __asm__ __volatile__
- ("movel %0,%/d0\n\t"
- "andl #0xff000000,%/d0\n\t"
- "orw #0xe020,%/d0\n\t" /* map 16 MB, enable, cacheable */
- ".chip 68040\n\t"
- "movec %%d0,%%itt0\n\t"
- "movec %%d0,%%dtt0\n\t"
- ".chip 68k\n\t"
- "jmp %0@\n\t"
- : /* no outputs */
- : "a" (jmp_addr040)
- : "d0" );
- jmp_addr_label040:
- __asm__ __volatile__
- ("moveq #0,%/d0\n\t"
- "nop\n\t"
- ".chip 68040\n\t"
- "cinva %%bc\n\t"
- "nop\n\t"
- "pflusha\n\t"
- "nop\n\t"
- "movec %%d0,%%tc\n\t"
- "nop\n\t"
- /* the following setup of transparent translations is needed on the
- * Afterburner040 to successfully reboot. Other machines shouldn't
- * care about a different tt regs setup, they also didn't care in
- * the past that the regs weren't turned off. */
- "movel #0xffc000,%%d0\n\t" /* whole insn space cacheable */
- "movec %%d0,%%itt0\n\t"
- "movec %%d0,%%itt1\n\t"
- "orw #0x40,%/d0\n\t" /* whole data space non-cacheable/ser. */
- "movec %%d0,%%dtt0\n\t"
- "movec %%d0,%%dtt1\n\t"
- ".chip 68k\n\t"
- "jmp %0@"
- : /* no outputs */
- : "a" (reset_addr)
- : "d0");
- }
- else
- __asm__ __volatile__
- ("pmove %0@,%/tc\n\t"
- "jmp %1@"
- : /* no outputs */
- : "a" (&tc_val), "a" (reset_addr));
+ long tc_val = 0;
+ long reset_addr;
+
+ /*
+ * On the Medusa, phys. 0x4 may contain garbage because it's no
+ * ROM. See above for explanation why we cannot use PTOV(4).
+ */
+ reset_addr = MACH_IS_HADES ? 0x7fe00030 :
+ MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+ *(unsigned long *) 0xff000004;
+
+ /* reset ACIA for switch off OverScan, if it's active */
+ if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
+ acia.key_ctrl = ACIA_RESET;
+ if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
+ acia.mid_ctrl = ACIA_RESET;
+
+ /* processor independent: turn off interrupts and reset the VBR;
+ * the caches must be left enabled, else prefetching the final jump
+ * instruction doesn't work.
+ */
+ local_irq_disable();
+ asm volatile ("movec %0,%%vbr"
+ : : "d" (0));
+
+ if (CPU_IS_040_OR_060) {
+ unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+ if (CPU_IS_060) {
+ /* 68060: clear PCR to turn off superscalar operation */
+ asm volatile ("\n"
+ " .chip 68060\n"
+ " movec %0,%%pcr\n"
+ " .chip 68k"
+ : : "d" (0));
+ }
+
+ asm volatile ("\n"
+ " move.l %0,%%d0\n"
+ " and.l #0xff000000,%%d0\n"
+ " or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */
+ " .chip 68040\n"
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%dtt0\n"
+ " .chip 68k\n"
+ " jmp %0@"
+ : : "a" (jmp_addr040)
+ : "d0");
+ jmp_addr_label040:
+ asm volatile ("\n"
+ " moveq #0,%%d0\n"
+ " nop\n"
+ " .chip 68040\n"
+ " cinva %%bc\n"
+ " nop\n"
+ " pflusha\n"
+ " nop\n"
+ " movec %%d0,%%tc\n"
+ " nop\n"
+ /* the following setup of transparent translations is needed on the
+ * Afterburner040 to successfully reboot. Other machines shouldn't
+ * care about a different tt regs setup, they also didn't care in
+ * the past that the regs weren't turned off. */
+ " move.l #0xffc000,%%d0\n" /* whole insn space cacheable */
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%itt1\n"
+ " or.w #0x40,%/d0\n" /* whole data space non-cacheable/ser. */
+ " movec %%d0,%%dtt0\n"
+ " movec %%d0,%%dtt1\n"
+ " .chip 68k\n"
+ " jmp %0@"
+ : /* no outputs */
+ : "a" (reset_addr)
+ : "d0");
+ } else
+ asm volatile ("\n"
+ " pmove %0@,%%tc\n"
+ " jmp %1@"
+ : /* no outputs */
+ : "a" (&tc_val), "a" (reset_addr));
}
static void atari_get_model(char *model)
{
- strcpy(model, "Atari ");
- switch (atari_mch_cookie >> 16) {
+ strcpy(model, "Atari ");
+ switch (atari_mch_cookie >> 16) {
case ATARI_MCH_ST:
- if (ATARIHW_PRESENT(MSTE_CLK))
- strcat (model, "Mega ST");
- else
- strcat (model, "ST");
- break;
+ if (ATARIHW_PRESENT(MSTE_CLK))
+ strcat(model, "Mega ST");
+ else
+ strcat(model, "ST");
+ break;
case ATARI_MCH_STE:
- if (MACH_IS_MSTE)
- strcat (model, "Mega STE");
- else
- strcat (model, "STE");
- break;
+ if (MACH_IS_MSTE)
+ strcat(model, "Mega STE");
+ else
+ strcat(model, "STE");
+ break;
case ATARI_MCH_TT:
- if (MACH_IS_MEDUSA)
- /* Medusa has TT _MCH cookie */
- strcat (model, "Medusa");
- else if (MACH_IS_HADES)
- strcat(model, "Hades");
- else
- strcat (model, "TT");
- break;
+ if (MACH_IS_MEDUSA)
+ /* Medusa has TT _MCH cookie */
+ strcat(model, "Medusa");
+ else if (MACH_IS_HADES)
+ strcat(model, "Hades");
+ else
+ strcat(model, "TT");
+ break;
case ATARI_MCH_FALCON:
- strcat (model, "Falcon");
- if (MACH_IS_AB40)
- strcat (model, " (with Afterburner040)");
- break;
+ strcat(model, "Falcon");
+ if (MACH_IS_AB40)
+ strcat(model, " (with Afterburner040)");
+ break;
default:
- sprintf (model + strlen (model), "(unknown mach cookie 0x%lx)",
- atari_mch_cookie);
- break;
- }
+ sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
+ atari_mch_cookie);
+ break;
+ }
}
static int atari_get_hardware_list(char *buffer)
{
- int len = 0, i;
-
- for (i = 0; i < m68k_num_memory; i++)
- len += sprintf (buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
- m68k_memory[i].size >> 20, m68k_memory[i].addr,
- (m68k_memory[i].addr & 0xff000000 ?
- "alternate RAM" : "ST-RAM"));
-
-#define ATARIHW_ANNOUNCE(name,str) \
- if (ATARIHW_PRESENT(name)) \
- len += sprintf (buffer + len, "\t%s\n", str)
-
- len += sprintf (buffer + len, "Detected hardware:\n");
- ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
- ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
- ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
- ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
- ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
- ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
- ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
- ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
- ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
- ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
- ATARIHW_ANNOUNCE(IDE, "IDE Interface");
- ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
- ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
- ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
- ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
- ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
- ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
- ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
- ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
- ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
- ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
- ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
- ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
- ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
- ATARIHW_ANNOUNCE(SCU, "System Control Unit");
- ATARIHW_ANNOUNCE(BLITTER, "Blitter");
- ATARIHW_ANNOUNCE(VME, "VME Bus");
- ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
-
- return(len);
+ int len = 0, i;
+
+ for (i = 0; i < m68k_num_memory; i++)
+ len += sprintf(buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
+ m68k_memory[i].size >> 20, m68k_memory[i].addr,
+ (m68k_memory[i].addr & 0xff000000 ?
+ "alternate RAM" : "ST-RAM"));
+
+#define ATARIHW_ANNOUNCE(name, str) \
+ if (ATARIHW_PRESENT(name)) \
+ len += sprintf(buffer + len, "\t%s\n", str)
+
+ len += sprintf(buffer + len, "Detected hardware:\n");
+ ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
+ ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
+ ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
+ ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
+ ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
+ ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
+ ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
+ ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
+ ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
+ ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
+ ATARIHW_ANNOUNCE(IDE, "IDE Interface");
+ ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
+ ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
+ ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
+ ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
+ ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
+ ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
+ ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
+ ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
+ ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
+ ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
+ ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
+ ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
+ ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
+ ATARIHW_ANNOUNCE(SCU, "System Control Unit");
+ ATARIHW_ANNOUNCE(BLITTER, "Blitter");
+ ATARIHW_ANNOUNCE(VME, "VME Bus");
+ ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
+
+ return len;
}
-
-/*
- * Local variables:
- * c-indent-level: 4
- * tab-width: 8
- * End:
- */
git.samba.org / sfrench / cifs-2.6.git / blobdiff