Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[sfrench/cifs-2.6.git] / arch / blackfin / mach-bf518 / include / mach / defBF516.h
index 7eb18774d7279a02428548f7e7156a7502172d25..22a3aa0d2629cedabb134618f8af488858c0afd0 100644 (file)
@@ -7,13 +7,8 @@
 #ifndef _DEF_BF516_H
 #define _DEF_BF516_H
 
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
-
-/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "defBF51x_base.h"
+/* BF516 is BF514 + EMAC */
+#include "defBF514.h"
 
 /* The following are the #defines needed by ADSP-BF516 that are not in the common header */
 /* 10/100 Ethernet Controller  (0xFFC03000 - 0xFFC031FF) */
 #define        TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
 #define        TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
 
-/* SDH Registers */
-
-#define SDH_PWR_CTL                    0xFFC03900 /* SDH Power Control */
-#define SDH_CLK_CTL                    0xFFC03904 /* SDH Clock Control */
-#define SDH_ARGUMENT                   0xFFC03908 /* SDH Argument */
-#define SDH_COMMAND                    0xFFC0390C /* SDH Command */
-#define SDH_RESP_CMD                   0xFFC03910 /* SDH Response Command */
-#define SDH_RESPONSE0                  0xFFC03914 /* SDH Response0 */
-#define SDH_RESPONSE1                  0xFFC03918 /* SDH Response1 */
-#define SDH_RESPONSE2                  0xFFC0391C /* SDH Response2 */
-#define SDH_RESPONSE3                  0xFFC03920 /* SDH Response3 */
-#define SDH_DATA_TIMER                 0xFFC03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH                  0xFFC03928 /* SDH Data Length */
-#define SDH_DATA_CTL                   0xFFC0392C /* SDH Data Control */
-#define SDH_DATA_CNT                   0xFFC03930 /* SDH Data Counter */
-#define SDH_STATUS                     0xFFC03934 /* SDH Status */
-#define SDH_STATUS_CLR                 0xFFC03938 /* SDH Status Clear */
-#define SDH_MASK0                      0xFFC0393C /* SDH Interrupt0 Mask */
-#define SDH_MASK1                      0xFFC03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT                   0xFFC03948 /* SDH FIFO Counter */
-#define SDH_FIFO                       0xFFC03980 /* SDH Data FIFO */
-#define SDH_E_STATUS                   0xFFC039C0 /* SDH Exception Status */
-#define SDH_E_MASK                     0xFFC039C4 /* SDH Exception Mask */
-#define SDH_CFG                        0xFFC039C8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN                 0xFFC039CC /* SDH Read Wait Enable */
-#define SDH_PID0                       0xFFC039D0 /* SDH Peripheral Identification0 */
-#define SDH_PID1                       0xFFC039D4 /* SDH Peripheral Identification1 */
-#define SDH_PID2                       0xFFC039D8 /* SDH Peripheral Identification2 */
-#define SDH_PID3                       0xFFC039DC /* SDH Peripheral Identification3 */
-#define SDH_PID4                       0xFFC039E0 /* SDH Peripheral Identification4 */
-#define SDH_PID5                       0xFFC039E4 /* SDH Peripheral Identification5 */
-#define SDH_PID6                       0xFFC039E8 /* SDH Peripheral Identification6 */
-#define SDH_PID7                       0xFFC039EC /* SDH Peripheral Identification7 */
-
-/* Removable Storage Interface Registers */
-
-#define RSI_PWR_CONTROL                0xFFC03800 /* RSI Power Control Register */
-#define RSI_CLK_CONTROL                0xFFC03804 /* RSI Clock Control Register */
-#define RSI_ARGUMENT                   0xFFC03808 /* RSI Argument Register */
-#define RSI_COMMAND                    0xFFC0380C /* RSI Command Register */
-#define RSI_RESP_CMD                   0xFFC03810 /* RSI Response Command Register */
-#define RSI_RESPONSE0                  0xFFC03814 /* RSI Response Register */
-#define RSI_RESPONSE1                  0xFFC03818 /* RSI Response Register */
-#define RSI_RESPONSE2                  0xFFC0381C /* RSI Response Register */
-#define RSI_RESPONSE3                  0xFFC03820 /* RSI Response Register */
-#define RSI_DATA_TIMER                 0xFFC03824 /* RSI Data Timer Register */
-#define RSI_DATA_LGTH                  0xFFC03828 /* RSI Data Length Register */
-#define RSI_DATA_CONTROL               0xFFC0382C /* RSI Data Control Register */
-#define RSI_DATA_CNT                   0xFFC03830 /* RSI Data Counter Register */
-#define RSI_STATUS                     0xFFC03834 /* RSI Status Register */
-#define RSI_STATUSCL                   0xFFC03838 /* RSI Status Clear Register */
-#define RSI_MASK0                      0xFFC0383C /* RSI Interrupt 0 Mask Register */
-#define RSI_MASK1                      0xFFC03840 /* RSI Interrupt 1 Mask Register */
-#define RSI_FIFO_CNT                   0xFFC03848 /* RSI FIFO Counter Register */
-#define RSI_CEATA_CONTROL              0xFFC0384C /* RSI CEATA Register */
-#define RSI_FIFO                       0xFFC03880 /* RSI Data FIFO Register */
-#define RSI_ESTAT                      0xFFC038C0 /* RSI Exception Status Register */
-#define RSI_EMASK                      0xFFC038C4 /* RSI Exception Mask Register */
-#define RSI_CONFIG                     0xFFC038C8 /* RSI Configuration Register */
-#define RSI_RD_WAIT_EN                 0xFFC038CC /* RSI Read Wait Enable Register */
-#define RSI_PID0                       0xFFC03FE0 /* RSI Peripheral ID Register 0 */
-#define RSI_PID1                       0xFFC03FE4 /* RSI Peripheral ID Register 1 */
-#define RSI_PID2                       0xFFC03FE8 /* RSI Peripheral ID Register 2 */
-#define RSI_PID3                       0xFFC03FEC /* RSI Peripheral ID Register 3 */
-#define RSI_PID4                       0xFFC03FF0 /* RSI Peripheral ID Register 4 */
-#define RSI_PID5                       0xFFC03FF4 /* RSI Peripheral ID Register 5 */
-#define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
-#define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
-
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 #endif /* _DEF_BF516_H */