Merge branch 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel...

[sfrench/cifs-2.6.git] / arch / arm / mach-s3c2410 / mach-n30.c

diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 05a5e877b49b73b7ccfa20734544b8f1f089e2c7..0f6ed61af41513c754f6237b590c8962dc57250c 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -19,6 +19,7 @@
 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
        switch (cmd) {
        case S3C2410_UDC_P_ENABLE :
-               s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+               s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
                break;
        case S3C2410_UDC_P_DISABLE :
-               s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+               s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
                break;
        case S3C2410_UDC_P_RESET :
                break;
@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
        .udc_command            = n30_udc_pullup,
-       .vbus_pin               = S3C2410_GPG1,
+       .vbus_pin               = S3C2410_GPG(1),
        .vbus_pin_inverted      = 0,
 };
 
 static struct gpio_keys_button n30_buttons[] = {
        {
-               .gpio           = S3C2410_GPF0,
+               .gpio           = S3C2410_GPF(0),
                .code           = KEY_POWER,
                .desc           = "Power",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG9,
+               .gpio           = S3C2410_GPG(9),
                .code           = KEY_UP,
                .desc           = "Thumbwheel Up",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG8,
+               .gpio           = S3C2410_GPG(8),
                .code           = KEY_DOWN,
                .desc           = "Thumbwheel Down",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG7,
+               .gpio           = S3C2410_GPG(7),
                .code           = KEY_ENTER,
                .desc           = "Thumbwheel Press",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF7,
+               .gpio           = S3C2410_GPF(7),
                .code           = KEY_HOMEPAGE,
                .desc           = "Home",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF6,
+               .gpio           = S3C2410_GPF(6),
                .code           = KEY_CALENDAR,
                .desc           = "Calendar",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF5,
+               .gpio           = S3C2410_GPF(5),
                .code           = KEY_ADDRESSBOOK,
                .desc           = "Contacts",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF4,
+               .gpio           = S3C2410_GPF(4),
                .code           = KEY_MAIL,
                .desc           = "Mail",
                .active_low     = 0,
@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
 
 static struct gpio_keys_button n35_buttons[] = {
        {
-               .gpio           = S3C2410_GPF0,
+               .gpio           = S3C2410_GPF(0),
                .code           = KEY_POWER,
                .desc           = "Power",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG9,
+               .gpio           = S3C2410_GPG(9),
                .code           = KEY_UP,
                .desc           = "Joystick Up",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG8,
+               .gpio           = S3C2410_GPG(8),
                .code           = KEY_DOWN,
                .desc           = "Joystick Down",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG6,
+               .gpio           = S3C2410_GPG(6),
                .code           = KEY_DOWN,
                .desc           = "Joystick Left",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG5,
+               .gpio           = S3C2410_GPG(5),
                .code           = KEY_DOWN,
                .desc           = "Joystick Right",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG7,
+               .gpio           = S3C2410_GPG(7),
                .code           = KEY_ENTER,
                .desc           = "Joystick Press",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF7,
+               .gpio           = S3C2410_GPF(7),
                .code           = KEY_HOMEPAGE,
                .desc           = "Home",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF6,
+               .gpio           = S3C2410_GPF(6),
                .code           = KEY_CALENDAR,
                .desc           = "Calendar",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF5,
+               .gpio           = S3C2410_GPF(5),
                .code           = KEY_ADDRESSBOOK,
                .desc           = "Contacts",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF4,
+               .gpio           = S3C2410_GPF(4),
                .code           = KEY_MAIL,
                .desc           = "Mail",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPF3,
+               .gpio           = S3C2410_GPF(3),
                .code           = SW_RADIO,
                .desc           = "GPS Antenna",
                .active_low     = 0,
        },
        {
-               .gpio           = S3C2410_GPG2,
+               .gpio           = S3C2410_GPG(2),
                .code           = SW_HEADPHONE_INSERT,
                .desc           = "Headphone",
                .active_low     = 0,
@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
 /* This is the bluetooth LED on the device. */
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
        .name           = "blue_led",
-       .gpio           = S3C2410_GPG6,
+       .gpio           = S3C2410_GPG(6),
        .def_trigger    = "",
 };
 
@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
        .name           = "warning_led",
        .flags          = S3C24XX_LEDF_ACTLOW,
-       .gpio           = S3C2410_GPD9,
+       .gpio           = S3C2410_GPD(9),
        .def_trigger    = "",
 };
 
@@ -340,8 +341,7 @@ static struct platform_device *n35_devices[] __initdata = {
 static struct s3c2410_platform_i2c n30_i2ccfg = {
        .flags          = 0,
        .slave_addr     = 0x10,
-       .bus_freq       = 10*1000,
-       .max_freq       = 10*1000,
+       .frequency      = 10*1000,
 };
 
 /* Lots of hardcoded stuff, but it sets up the hardware in a useful