#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
+#include <linux/ata_platform.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
.map_irq = dns323_pci_map_irq,
};
+static int __init dns323_dev_id(void)
+{
+ u32 dev, rev;
+
+ orion5x_pcie_id(&dev, &rev);
+
+ return dev;
+}
+
static int __init dns323_pci_init(void)
{
- if (machine_is_dns323())
+ /* The 5182 doesn't really use it's PCI bus, and initialising PCI
+ * gets in the way of initialising the SATA controller.
+ */
+ if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
pci_common_init(&dns323_pci);
return 0;
subsys_initcall(dns323_pci_init);
-/****************************************************************************
- * Ethernet
- */
-
-static struct mv643xx_eth_platform_data dns323_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
/****************************************************************************
* 8MiB NOR flash (Spansion S29GL064M90TFIR4)
*
.num_resources = 1,
};
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+
+ if (n >= 'A' && n <= 'F')
+ return n - 'A' + 10;
+
+ if (n >= 'a' && n <= 'f')
+ return n - 'a' + 10;
+
+ return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+ int hi;
+ int lo;
+
+ hi = dns323_parse_hex_nibble(b[0]);
+ lo = dns323_parse_hex_nibble(b[1]);
+
+ if (hi < 0 || lo < 0)
+ return -1;
+
+ return (hi << 4) | lo;
+}
+
+static int __init dns323_read_mac_addr(void)
+{
+ u_int8_t addr[6];
+ int i;
+ char *mac_page;
+
+ /* MAC address is stored as a regular ol' string in /dev/mtdblock4
+ * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
+ */
+ mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
+ if (!mac_page)
+ return -ENOMEM;
+
+ /* Sanity check the string we're looking at */
+ for (i = 0; i < 5; i++) {
+ if (*(mac_page + (i * 3) + 2) != ':') {
+ goto error_fail;
+ }
+ }
+
+ for (i = 0; i < 6; i++) {
+ int byte;
+
+ byte = dns323_parse_hex_byte(mac_page + (i * 3));
+ if (byte < 0) {
+ goto error_fail;
+ }
+
+ addr[i] = byte;
+ }
+
+ iounmap(mac_page);
+ printk("DNS323: Found ethernet MAC address: ");
+ for (i = 0; i < 6; i++)
+ printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+ memcpy(dns323_eth_data.mac_addr, addr, 6);
+
+ return 0;
+
+error_fail:
+ iounmap(mac_page);
+ return -EINVAL;
+}
+
/****************************************************************************
* GPIO LEDs (simple - doesn't use hardware blinking support)
*/
},
};
+/*****************************************************************************
+ * SATA
+ */
+static struct mv_sata_platform_data dns323_sata_data = {
+ .n_ports = 2,
+};
+
/****************************************************************************
* General Setup
*/
-static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
{ 0, MPP_PCIE_RST_OUTn },
{ 1, MPP_GPIO }, /* right amber LED (sata ch0) */
{ 2, MPP_GPIO }, /* left amber LED (sata ch1) */
{ -1 },
};
+static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED },
+ { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
+ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
+ { 3, MPP_UNUSED },
+ { 4, MPP_GPIO }, /* power button LED */
+ { 5, MPP_GPIO }, /* power button LED */
+ { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
+ { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
+ { 8, MPP_GPIO }, /* triggers power off */
+ { 9, MPP_GPIO }, /* power button switch */
+ { 10, MPP_GPIO }, /* reset button switch */
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED },
+ { 13, MPP_SATA_LED },
+ { 14, MPP_SATA_LED },
+ { 15, MPP_SATA_LED },
+ { 16, MPP_UNUSED },
+ { 17, MPP_UNUSED },
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
/*
* On the DNS-323 the following devices are attached via I2C:
*
/* Setup basic Orion functions. Need to be called early. */
orion5x_init();
- orion5x_mpp_conf(dns323_mpp_modes);
- writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
-
- /*
- * Configure peripherals.
+ /* Just to be tricky, the 5182 has a completely different
+ * set of MPP modes to the 5181.
*/
- orion5x_ehci0_init();
- orion5x_eth_init(&dns323_eth_data);
- orion5x_i2c_init();
- orion5x_uart0_init();
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
+ else {
+ orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+ writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
+ }
/* setup flash mapping
* CS3 holds a 8 MB Spansion S29GL064M90TFIR4
i2c_register_board_info(0, dns323_i2c_devices,
ARRAY_SIZE(dns323_i2c_devices));
+ /*
+ * Configure peripherals.
+ */
+ if (dns323_read_mac_addr() < 0)
+ printk("DNS323: Failed to read MAC address\n");
+
+ orion5x_ehci0_init();
+ orion5x_eth_init(&dns323_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+
+ /* The 5182 has it's SATA controller on-chip, and needs it's own little
+ * init routine.
+ */
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ orion5x_sata_init(&dns323_sata_data);
+
/* register dns323 specific power-off method */
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
git.samba.org / sfrench / cifs-2.6.git / blobdiff