/*
- * linux/arch/arm/mach-omap/omap2/board-h4.c
+ * linux/arch/arm/mach-omap2/board-h4.c
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/flash.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/gpioexpander.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
+#include <asm/arch/irda.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/menelaus.h>
+#include <asm/arch/dma.h>
+#include "prcm-regs.h"
#include <asm/io.h>
#include <asm/delay.h>
+static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
+static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
+
+static int h4_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(0, 4, KEY_C),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(1, 4, KEY_G),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_3),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P),
+ KEY(3, 4, KEY_Q),
+ KEY(4, 0, KEY_R),
+ KEY(4, 1, KEY_4),
+ KEY(4, 2, KEY_T),
+ KEY(4, 3, KEY_U),
+ KEY(4, 4, KEY_ENTER),
+ KEY(5, 0, KEY_V),
+ KEY(5, 1, KEY_W),
+ KEY(5, 2, KEY_L),
+ KEY(5, 3, KEY_S),
+ KEY(5, 4, KEY_ENTER),
+ 0
+};
+
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.resource = h4_smc91x_resources,
};
+/* Select between the IrDA and aGPS module
+ */
+static int h4_select_irda(struct device *dev, int state)
+{
+ unsigned char expa;
+ int err = 0;
+
+ if ((err = read_gpio_expa(&expa, 0x21))) {
+ printk(KERN_ERR "Error reading from I/O expander\n");
+ return err;
+ }
+
+ /* 'P6' enable/disable IRDA_TX and IRDA_RX */
+ if (state & IR_SEL) { /* IrDa */
+ if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
+ printk(KERN_ERR "Error writing to I/O expander\n");
+ return err;
+ }
+ } else {
+ if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
+ printk(KERN_ERR "Error writing to I/O expander\n");
+ return err;
+ }
+ }
+ return err;
+}
+
+static void set_trans_mode(void *data)
+{
+ int *mode = data;
+ unsigned char expa;
+ int err = 0;
+
+ if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
+ printk(KERN_ERR "Error reading from I/O expander\n");
+ }
+
+ expa &= ~0x01;
+
+ if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */
+ expa |= 0x01;
+ }
+
+ if ((err = write_gpio_expa(expa, 0x20)) != 0) {
+ printk(KERN_ERR "Error writing to I/O expander\n");
+ }
+}
+
+static int h4_transceiver_mode(struct device *dev, int mode)
+{
+ struct omap_irda_config *irda_config = dev->platform_data;
+
+ cancel_delayed_work(&irda_config->gpio_expa);
+ PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
+#error this is not permitted - mode is an argument variable
+ schedule_delayed_work(&irda_config->gpio_expa, 0);
+
+ return 0;
+}
+
+static struct omap_irda_config h4_irda_data = {
+ .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
+ .transceiver_mode = h4_transceiver_mode,
+ .select_irda = h4_select_irda,
+ .rx_channel = OMAP24XX_DMA_UART3_RX,
+ .tx_channel = OMAP24XX_DMA_UART3_TX,
+ .dest_start = OMAP_UART3_BASE,
+ .src_start = OMAP_UART3_BASE,
+ .tx_trigger = OMAP24XX_DMA_UART3_TX,
+ .rx_trigger = OMAP24XX_DMA_UART3_RX,
+};
+
+static struct resource h4_irda_resources[] = {
+ [0] = {
+ .start = INT_24XX_UART3_IRQ,
+ .end = INT_24XX_UART3_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device h4_irda_device = {
+ .name = "omapirda",
+ .id = -1,
+ .dev = {
+ .platform_data = &h4_irda_data,
+ },
+ .num_resources = 1,
+ .resource = h4_irda_resources,
+};
+
+static struct omap_kp_platform_data h4_kp_data = {
+ .rows = 6,
+ .cols = 7,
+ .keymap = h4_keymap,
+ .keymapsize = ARRAY_SIZE(h4_keymap),
+ .rep = 1,
+ .row_gpios = row_gpios,
+ .col_gpios = col_gpios,
+};
+
+static struct platform_device h4_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &h4_kp_data,
+ },
+};
+
+static struct platform_device h4_lcd_device = {
+ .name = "lcd_h4",
+ .id = -1,
+};
+
static struct platform_device *h4_devices[] __initdata = {
&h4_smc91x_device,
&h4_flash_device,
+ &h4_irda_device,
+ &h4_kp_device,
+ &h4_lcd_device,
};
static inline void __init h4_init_smc91x(void)
};
static struct omap_lcd_config h4_lcd_config __initdata = {
- .panel_name = "h4",
.ctrl_name = "internal",
};
* You have to mux them off in device drivers later on
* if not needed.
*/
+#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
+ omap_cfg_reg(K15_24XX_UART3_TX);
+ omap_cfg_reg(K14_24XX_UART3_RX);
+#endif
+
+#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
+ if (omap_has_menelaus()) {
+ row_gpios[5] = 0;
+ col_gpios[2] = 15;
+ col_gpios[6] = 18;
+ }
+#endif
+
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
git.samba.org / sfrench / cifs-2.6.git / blobdiff