#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/control.h>
+#include <mach/gpio.h>
+#include <mach/led.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/control.h>
/* LED & Switch macros */
#define LED0_GPIO13 13
udelay(100);
omap_cfg_reg(W4__24XX_GPIO74);
- if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
+ if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
APOLLON_ETHR_GPIO_IRQ);
gpmc_cs_free(APOLLON_ETH_CS);
goto out;
}
- omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+ gpio_direction_input(APOLLON_ETHR_GPIO_IRQ);
out:
clk_disable(gpmc_fck);
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};
-static struct omap_mmc_config apollon_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 1,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
- },
-};
-
static struct omap_usb_config apollon_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
- { OMAP_TAG_MMC, &apollon_mmc_config },
{ OMAP_TAG_USB, &apollon_usb_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
/* Enter SW - Y11 */
omap_cfg_reg(Y11_242X_GPIO16);
omap_request_gpio(SW_ENTER_GPIO16);
- omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
+ gpio_direction_input(SW_ENTER_GPIO16);
/* Up SW - AA12 */
omap_cfg_reg(AA12_242X_GPIO17);
omap_request_gpio(SW_UP_GPIO17);
- omap_set_gpio_direction(SW_UP_GPIO17, 1);
+ gpio_direction_input(SW_UP_GPIO17);
/* Down SW - AA8 */
omap_cfg_reg(AA8_242X_GPIO58);
omap_request_gpio(SW_DOWN_GPIO58);
- omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
+ gpio_direction_input(SW_DOWN_GPIO58);
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
/* USB device */
/* DEVICE_SUSPEND */
omap_cfg_reg(P21_242X_GPIO12);
- omap_request_gpio(12);
- omap_set_gpio_direction(12, 0); /* OUT */
- omap_set_gpio_dataout(12, 0);
+ gpio_request(12, "USB suspend");
+ gpio_direction_output(12, 0);
}
static void __init omap_apollon_init(void)