Merge master.kernel.org:/home/rmk/linux-2.6-serial
[sfrench/cifs-2.6.git] / arch / arm / mach-omap1 / board-voiceblue.c
index e422819889904124bf56e84fd577a90ba5c9bca9..bf30b1acda0b97a1c9795a0006622c7db6935265 100644 (file)
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
 #include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-#include <asm/arch/common.h>
 
 extern void omap_init_time(void);
 extern int omap_gpio_init(void);
@@ -74,7 +75,7 @@ static struct plat_serial8250_port voiceblue_ports[] = {
 
 static struct platform_device serial_device = {
        .name                   = "serial8250",
-       .id                     = 1,
+       .id                     = PLAT8250_DEV_PLATFORM1,
        .dev                    = {
                .platform_data  = voiceblue_ports,
        },
@@ -86,6 +87,27 @@ static int __init ext_uart_init(void)
 }
 arch_initcall(ext_uart_init);
 
+static struct flash_platform_data voiceblue_flash_data = {
+       .map_name       = "cfi_probe",
+       .width          = 2,
+};
+
+static struct resource voiceblue_flash_resource = {
+       .start  = OMAP_CS0_PHYS,
+       .end    = OMAP_CS0_PHYS + SZ_32M - 1,
+       .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device voiceblue_flash_device = {
+       .name           = "omapflash",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &voiceblue_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &voiceblue_flash_resource,
+};
+
 static struct resource voiceblue_smc91x_resources[] = {
        [0] = {
                .start  = OMAP_CS2_PHYS + 0x300,
@@ -107,6 +129,7 @@ static struct platform_device voiceblue_smc91x_device = {
 };
 
 static struct platform_device *voiceblue_devices[] __initdata = {
+       &voiceblue_flash_device,
        &voiceblue_smc91x_device,
 };
 
@@ -119,8 +142,17 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
        .pins[2]        = 6,
 };
 
+static struct omap_mmc_config voiceblue_mmc_config __initdata = {
+       .mmc[0] = {
+               .enabled        = 1,
+               .power_pin      = 2,
+               .switch_pin     = -1,
+       },
+};
+
 static struct omap_board_config_kernel voiceblue_config[] = {
        { OMAP_TAG_USB, &voiceblue_usb_config },
+       { OMAP_TAG_MMC, &voiceblue_mmc_config },
 };
 
 static void __init voiceblue_init_irq(void)
@@ -131,9 +163,6 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
-       /* There is a good chance board is going up, so enable Power LED
-        * (it is connected through invertor) */
-       omap_writeb(0x00, OMAP_LPG1_LCR);
        /* Watchdog */
        omap_request_gpio(0);
        /* smc91x reset */
@@ -145,7 +174,6 @@ static void __init voiceblue_init(void)
        mdelay(50);     /* 50ms until PHY ready */
        /* smc91x interrupt pin */
        omap_request_gpio(8);
-       omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
        /* 16C554 reset*/
        omap_request_gpio(6);
        omap_set_gpio_direction(6, 0);
@@ -155,14 +183,19 @@ static void __init voiceblue_init(void)
        omap_request_gpio(13);
        omap_request_gpio(14);
        omap_request_gpio(15);
-       omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
-       omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
-       omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
-       omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
+       set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
+       set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+       set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
+       set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
 
        platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
        omap_board_config = voiceblue_config;
        omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+
+       /* There is a good chance board is going up, so enable power LED
+        * (it is connected through invertor) */
+       omap_writeb(0x00, OMAP_LPG1_LCR);
+       omap_writeb(0x00, OMAP_LPG1_PMR);       /* Disable clock */
 }
 
 static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
@@ -184,9 +217,9 @@ static int panic_event(struct notifier_block *this, unsigned long event,
        if (test_and_set_bit(MACHINE_PANICED, &machine_state))
                return NOTIFY_DONE;
 
-       /* Flash Power LED
-        * (TODO: Enable clock right way (enabled in bootloader already)) */
+       /* Flash power LED */
        omap_writeb(0x78, OMAP_LPG1_LCR);
+       omap_writeb(0x01, OMAP_LPG1_PMR);       /* Enable clock */
 
        return NOTIFY_DONE;
 }
@@ -195,15 +228,14 @@ static struct notifier_block panic_block = {
        .notifier_call  = panic_event,
 };
 
-static int __init setup_notifier(void)
+static int __init voiceblue_setup(void)
 {
        /* Setup panic notifier */
        notifier_chain_register(&panic_notifier_list, &panic_block);
 
        return 0;
 }
-
-postcore_initcall(setup_notifier);
+postcore_initcall(voiceblue_setup);
 
 static int wdt_gpio_state;