Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
[sfrench/cifs-2.6.git] / arch / arm / mach-mx3 / mach-cpuimx35.c
index 4d161b3fca6505b9a5dcb8aa5ba3ea5d92c60462..9fde873f5889c6292ae6ea97f5011bd632d54aa4 100644 (file)
@@ -31,6 +31,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/fsl_devices.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -43,7 +44,6 @@
 #include <mach/iomux-mx35.h>
 #include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -53,39 +53,16 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 };
 
 static const struct imxi2c_platform_data
-eukrea_cpuimx35_i2c0_data __initconst = {
-       .bitrate = 50000,
+               eukrea_cpuimx35_i2c0_data __initconst = {
+       .bitrate =              100000,
 };
 
-#define TSC2007_IRQGPIO                (2 * 32 + 2)
-static int ts_get_pendown_state(void)
-{
-       int val = 0;
-       gpio_free(TSC2007_IRQGPIO);
-       gpio_request(TSC2007_IRQGPIO, NULL);
-       gpio_direction_input(TSC2007_IRQGPIO);
-
-       val = gpio_get_value(TSC2007_IRQGPIO);
-
-       gpio_free(TSC2007_IRQGPIO);
-       gpio_request(TSC2007_IRQGPIO, NULL);
-
-       return val ? 0 : 1;
-}
-
-static int ts_init(void)
-{
-       gpio_request(TSC2007_IRQGPIO, NULL);
-       return 0;
-}
-
 static struct tsc2007_platform_data tsc2007_info = {
        .model                  = 2007,
        .x_plate_ohms           = 180,
-       .get_pendown_state      = ts_get_pendown_state,
-       .init_platform_hw       = ts_init,
 };
 
+#define TSC2007_IRQGPIO                (2 * 32 + 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
        {
                I2C_BOARD_INFO("pcf8563", 0x51),
@@ -98,7 +75,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 };
 
 static struct platform_device *devices[] __initdata = {
-       &mxc_fec_device,
        &imx_wdt_device0,
 };
 
@@ -135,18 +111,18 @@ static struct pad_desc eukrea_cpuimx35_pads[] = {
 };
 
 static const struct mxc_nand_platform_data
-eukrea_cpuimx35_nand_board_info __initconst = {
+               eukrea_cpuimx35_nand_board_info __initconst = {
        .width          = 1,
        .hw_ecc         = 1,
        .flash_bbt      = 1,
 };
 
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
        .portsc = MXC_EHCI_MODE_UTMI,
        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
        .portsc = MXC_EHCI_MODE_SERIAL,
        .flags  = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
                  MXC_EHCI_IPPUE_DOWN,
@@ -181,6 +157,7 @@ static void __init mxc_board_init(void)
        mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
                        ARRAY_SIZE(eukrea_cpuimx35_pads));
 
+       imx35_add_fec(NULL);
        platform_add_devices(devices, ARRAY_SIZE(devices));
 
        imx35_add_imx_uart0(&uart_pdata);
@@ -190,18 +167,13 @@ static void __init mxc_board_init(void)
                        ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
        imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
 
-#if defined(CONFIG_USB_ULPI)
-       if (otg_mode_host) {
-               otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-                               ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
+       if (otg_mode_host)
                mxc_register_device(&mxc_otg_host, &otg_pdata);
-       }
-       mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-#endif
-       if (!otg_mode_host)
+       else
                mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
+       mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
        eukrea_mbimxsd35_baseboard_init();
 #endif
@@ -218,8 +190,6 @@ struct sys_timer eukrea_cpuimx35_timer = {
 
 MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
        /* Maintainer: Eukrea Electromatique */
-       .phys_io        = MX35_AIPS1_BASE_ADDR,
-       .io_pg_offst    = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
        .map_io         = mx35_map_io,
        .init_irq       = mx35_init_irq,