Merge branch 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel...

[sfrench/cifs-2.6.git] / arch / arm / mach-kirkwood / include / mach / kirkwood.h

diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index b3e13958821dc7d275b8d36e6fea7e37852e6d06..07af858814a0dc418b0d50e68293d1d82ca2d4b9 100644 (file)
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -20,16 +20,18 @@
  * f1000000    on-chip peripheral registers
  * f2000000    PCIe I/O space
  * f3000000    NAND controller address window
+ * f4000000    Security Accelerator SRAM
  *
  * virt                phys            size
  * fee00000    f1000000        1M      on-chip peripheral registers
  * fef00000    f2000000        1M      PCIe I/O space
  */
 
+#define KIRKWOOD_SRAM_PHYS_BASE                0xf4000000
+#define KIRKWOOD_SRAM_SIZE             SZ_2K
+
 #define KIRKWOOD_NAND_MEM_PHYS_BASE    0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE         SZ_64K /* 1K is sufficient, but 64K
-                                               * is the minimal window size
-                                               */
+#define KIRKWOOD_NAND_MEM_SIZE         SZ_1K
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE     0xf2000000
 #define KIRKWOOD_PCIE_IO_VIRT_BASE     0xfef00000
@@ -48,6 +50,7 @@
  */
 #define DDR_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
 #define  DDR_WINDOW_CPU_BASE   (DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE     (DDR_VIRT_BASE | 0x1418)
 
 #define DEV_BUS_PHYS_BASE      (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
 #define DEV_BUS_VIRT_BASE      (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
@@ -63,7 +66,11 @@
 
 #define BRIDGE_VIRT_BASE       (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
 
+#define CRYPTO_PHYS_BASE       (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+
 #define PCIE_VIRT_BASE         (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+#define PCIE_LINK_CTRL         (PCIE_VIRT_BASE | 0x70)
+#define PCIE_STATUS            (PCIE_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -80,6 +87,11 @@
 #define GE01_PHYS_BASE         (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 
 #define SATA_PHYS_BASE         (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SATA_VIRT_BASE         (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
+#define SATA0_IF_CTRL          (SATA_VIRT_BASE | 0x2050)
+#define SATA0_PHY_MODE_2       (SATA_VIRT_BASE | 0x2330)
+#define SATA1_IF_CTRL          (SATA_VIRT_BASE | 0x4050)
+#define SATA1_PHY_MODE_2       (SATA_VIRT_BASE | 0x4330)
 
 #define SDIO_PHYS_BASE         (KIRKWOOD_REGS_PHYS_BASE | 0x90000)