#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
+#include <linux/i2c-gpio.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91sam926x_mc.h>
#include <asm/arch/at91cap9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
#include "generic.h"
#endif
+/* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+
+static struct resource usba_udc_resources[] = {
+ [0] = {
+ .start = AT91CAP9_UDPHS_FIFO,
+ .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_BASE_UDPHS,
+ .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91CAP9_ID_UDPHS,
+ .end = AT91CAP9_ID_UDPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+static struct usba_ep_data usba_udc_ep[] = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1", 1, 1024, 3, 1, 1),
+ EP("ep2", 2, 1024, 3, 1, 1),
+ EP("ep3", 3, 1024, 2, 1, 1),
+ EP("ep4", 4, 1024, 2, 1, 1),
+ EP("ep5", 5, 1024, 2, 1, 0),
+ EP("ep6", 6, 1024, 2, 1, 0),
+ EP("ep7", 7, 1024, 2, 0, 0),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[8];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+ at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
+ AT91_MATRIX_UDPHS_BYPASS_LOCK);
+
+ /*
+ * Invalid pins are 0 on AT91, but the usba driver is shared
+ * with AVR32, which use negative values instead. Once/if
+ * gpio_is_valid() is ported to AT91, revisit this code.
+ */
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
}
mmc0_data = *data;
- at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
platform_device_register(&at91cap9_mmc0_device);
} else { /* MCI1 */
/* CLK */
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
- {
+ [0] = {
.start = NAND_BASE,
.end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_BASE_SYS + AT91_ECC,
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
}
};
void __init at91_add_device_nand(struct at91_nand_data *data) {}
#endif
+
/* --------------------------------------------------------------------
* TWI (i2c)
* -------------------------------------------------------------------- */
#endif
+/* --------------------------------------------------------------------
+ * Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_TCB0,
+ .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_TCB,
+ .end = AT91CAP9_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_tcb_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb_resources,
+ .num_resources = ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+ /* this chip has one clock and irq for all three TC channels */
+ at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
+ platform_device_register(&at91cap9_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct platform_device at91cap9_rtt_device = {
.name = "at91_rtt",
- .id = -1,
- .num_resources = 0,
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
};
static void __init at91_add_device_rtt(void)
at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
}
-static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
{
at91_add_device_rtt();
at91_add_device_watchdog();
+ at91_add_device_tc();
return 0;
}
git.samba.org / sfrench / cifs-2.6.git / blobdiff