Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / sun8i-a83t-cubietruck-plus.dts

diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index cff33454fc2458bf0e1fee5110ab8dd86c88cc21..716a205c6dbbeca282efbe4498742634205ad8bd 100644 (file)
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 #include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -83,6 +84,17 @@
                };
        };
 
+       usb-hub {
+               /* I2C is not connected */
+               compatible = "smsc,usb3503";
+               initial-mode = <1>; /* initialize in HUB mode */
+               disabled-ports = <1>;
+               intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+               reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+               connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+               refclk-frequency = <19200000>;
+       };
+
        sound {
                compatible = "simple-audio-card";
                simple-audio-card,name = "On-board SPDIF";
@@ -102,6 +114,89 @@
        };
 };
 
+&ehci0 {
+       /* GL830 USB-to-SATA bridge here */
+       status = "okay";
+};
+
+&ehci1 {
+       /* USB3503 HSIC USB 2.0 hub here */
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <8>;
+       non-removable;
+       cap-mmc-hw-reset;
+       status = "okay";
+};
+
+&r_rsb {
+       status = "okay";
+
+       axp81x: pmic@3a3 {
+               compatible = "x-powers,axp818", "x-powers,axp813";
+               reg = <0x3a3>;
+               interrupt-parent = <&r_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+       };
+
+       ac100: codec@e89 {
+               compatible = "x-powers,ac100";
+               reg = <0xe89>;
+
+               ac100_codec: codec {
+                       compatible = "x-powers,ac100-codec";
+                       interrupt-parent = <&r_pio>;
+                       interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+                       #clock-cells = <0>;
+                       clock-output-names = "4M_adda";
+               };
+
+               ac100_rtc: rtc {
+                       compatible = "x-powers,ac100-rtc";
+                       interrupt-parent = <&r_intc>;
+                       interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&ac100_codec>;
+                       #clock-cells = <1>;
+                       clock-output-names = "cko1_rtc",
+                                            "cko2_rtc",
+                                            "cko3_rtc";
+               };
+       };
+};
+
+&reg_usb1_vbus {
+       gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+       status = "okay";
+};
+
+&reg_usb2_vbus {
+       gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+       status = "okay";
+};
+
+&reg_vcc3v0 {
+       status = "disabled";
+};
+
+&reg_vcc5v0 {
+       status = "disabled";
+};
+
 &spdif {
        status = "okay";
 };
@@ -111,3 +206,9 @@
        pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
+
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       usb2_vbus-supply = <&reg_usb2_vbus>;
+       status = "okay";
+};