Merge branch 'omap-for-v4.21/dt' into omap-for-v5.1/dt

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / sun7i-a20-cubietruck.dts

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 5649161de1d7235872ab44f6a1da33ac01a0522d..99f531b8d2a78a2676bd34812e4a1127d214394e 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -74,8 +74,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_cubietruck>;
 
                blue {
                        label = "cubietruck:blue:usr";
@@ -100,9 +98,9 @@
 
        mmc3_pwrseq: mmc3_pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
                reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+               clocks = <&ccu CLK_OUT_A>;
+               clock-names = "ext_clock";
        };
 
        sound {
@@ -151,7 +149,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
@@ -172,8 +170,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -185,25 +181,20 @@
 
 &i2c1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -211,8 +202,6 @@
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&mmc3_pwrseq>;
        bus-width = <4>;
@@ -228,11 +217,6 @@
        };
 };
 
-&mmc3_pins_a {
-       /* AP6210 requires pull-up */
-       bias-pull-up;
-};
-
 &ohci0 {
        status = "okay";
 };
@@ -246,45 +230,18 @@
 };
 
 &pio {
-       ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-               pins = "PH12";
-               function = "gpio_out";
-       };
-
-       led_pins_cubietruck: led_pins@0 {
-               pins = "PH7", "PH11", "PH20", "PH21";
-               function = "gpio_out";
-       };
-
-       mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
-               pins = "PH9";
-               function = "gpio_out";
-       };
-
-       usb0_vbus_pin_a: usb0_vbus_pin@0 {
-               pins = "PH17";
-               function = "gpio_out";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               pins = "PH19";
-               function = "gpio_in";
-       };
-
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               pins = "PH22";
-               function = "gpio_in";
-       };
+       /* Pin outputs low power clock for WiFi and BT */
+       pinctrl-0 = <&clk_out_a_pin>;
+       pinctrl-names = "default";
 };
 
 &pwm {
        pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+       pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
        status = "okay";
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
        gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -325,7 +282,6 @@
 };
 
 &reg_usb0_vbus {
-       pinctrl-0 = <&usb0_vbus_pin_a>;
        gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -340,14 +296,31 @@
 
 &spdif {
        pinctrl-names = "default";
-       pinctrl-0 = <&spdif_tx_pins_a>;
+       pinctrl-0 = <&spdif_tx_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+       uart-has-rtscts;
        status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm20702a1";
+               clocks = <&ccu CLK_OUT_A>;
+               clock-names = "lpo";
+               device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+               host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+               shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+               max-speed = <1500000>;
+       };
 };
 
 &usb_otg {
@@ -360,8 +333,6 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
        usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
        usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
        usb0_vbus_power-supply = <&usb_power_supply>;