Merge tag 'v3.15-rc1' into perf/urgent

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / kirkwood-mv88f6281gtw-ge.dts

diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index dc86429756d79787a780946668e2a80cd50fa893..2cb0dc529165dcd88cbbba8ae7df7da2647a041f 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -122,4 +122,66 @@
                        gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
                };
        };
+
+       dsa@0 {
+               compatible = "marvell,dsa";
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               dsa,ethernet = <&eth0>;
+               dsa,mii-bus = <&ethphy0>;
+
+               switch@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
+
+                       port@0 {
+                               reg = <0>;
+                               label = "lan1";
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               label = "lan2";
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               label = "lan3";
+                       };
+
+                       port@3 {
+                               reg = <3>;
+                               label = "lan4";
+                       };
+
+                       port@4 {
+                               reg = <4>;
+                               label = "wan";
+                       };
+
+                       port@5 {
+                               reg = <5>;
+                               label = "cpu";
+                       };
+               };
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@ff {
+               reg = <0xff>;   /* No phy attached */
+               speed = <1000>;
+               duplex = <1>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+       };
 };