Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

[sfrench/cifs-2.6.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c84350868c23f3a72564934562071272df2a788d..8bf97e0eacdb6ddcdbfec048fce20de9b88b6908 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,6 +9,7 @@ config ARM
        bool
        default y
        select RTC_LIB
+       select SYS_SUPPORTS_APM_EMULATION
        help
          The ARM series is a line of low-power-consumption RISC chip designs
          licensed by ARM Ltd and targeted at embedded applications and
@@ -17,6 +18,9 @@ config ARM
          Europe.  There is an ARM Linux project with a web page at
          <http://www.arm.linux.org.uk/>.
 
+config SYS_SUPPORTS_APM_EMULATION
+       bool
+
 config GENERIC_TIME
        bool
        default n
@@ -25,6 +29,10 @@ config MMU
        bool
        default y
 
+config NO_IOPORT
+       bool
+       default n
+
 config EISA
        bool
        ---help---
@@ -96,6 +104,10 @@ config GENERIC_BUST_SPINLOCK
 config ARCH_MAY_HAVE_PC_FDC
        bool
 
+config ZONE_DMA
+       bool
+       default y
+
 config GENERIC_ISA_DMA
        bool
 
@@ -233,6 +245,8 @@ config ARCH_IOP33X
 
 config ARCH_IOP13XX
        bool "IOP13xx-based"
+       depends on MMU
+       select PLAT_IOP
        select PCI
        help
          Support for Intel's IOP13XX (XScale) family of processors.
@@ -288,6 +302,7 @@ config ARCH_PXA
        bool "PXA2xx-based"
        depends on MMU
        select ARCH_MTD_XIP
+       select GENERIC_TIME
        help
          Support for Intel's PXA2XX processor line.
 
@@ -298,6 +313,7 @@ config ARCH_RPC
        select TIMER_ACORN
        select ARCH_MAY_HAVE_PC_FDC
        select ISA_DMA_API
+       select NO_IOPORT
        help
          On the Acorn Risc-PC, Linux can support the internal IDE disk and
          CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -311,7 +327,7 @@ config ARCH_SA1100
          Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-       bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+       bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
        help
          Samsung S3C2410X CPU based systems, such as the Simtec Electronics
          BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -371,7 +387,16 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
@@ -385,7 +410,7 @@ source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 
@@ -748,6 +773,20 @@ config XIP_PHYS_ADDR
          be linked for and stored to.  This address is dependent on your
          own flash usage.
 
+config KEXEC
+       bool "Kexec system call (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       help
+         kexec is a system call that implements the ability to shutdown your
+         current kernel, and to start another kernel.  It is like a reboot
+         but it is indepedent of the system firmware.   And like a reboot
+         you can start any kernel with it, not just Linux.
+
+         It is an ongoing process to be certain the hardware in a machine
+         is properly shutdown, so do not be surprised if this code does not
+         initially work for you.  It may help to enable device hotplugging
+         support.
+
 endmenu
 
 if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
@@ -866,31 +905,6 @@ menu "Power management options"
 
 source "kernel/power/Kconfig"
 
-config APM
-       tristate "Advanced Power Management Emulation"
-       ---help---
-         APM is a BIOS specification for saving power using several different
-         techniques. This is mostly useful for battery powered laptops with
-         APM compliant BIOSes. If you say Y here, the system time will be
-         reset after a RESUME operation, the /proc/apm device will provide
-         battery status information, and user-space programs will receive
-         notification of APM "events" (e.g. battery status change).
-
-         In order to use APM, you will need supporting software. For location
-         and more information, read <file:Documentation/pm.txt> and the
-         Battery Powered Linux mini-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         This driver does not spin down disk drives (see the hdparm(8)
-         manpage ("man 8 hdparm") for that), and it doesn't turn off
-         VESA-compliant "green" monitors.
-
-         Generally, if you don't have a battery in your machine, there isn't
-         much point in using this driver and you should say N. If you get
-         random kernel OOPSes or reboots that don't seem to be related to
-         anything, try disabling/enabling this option (or disabling/enabling
-         APM in your BIOS).
-
 endmenu
 
 source "net/Kconfig"