select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
+ select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
+ select HAVE_FTRACE if (!XIP_KERNEL)
+ select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
+config HAVE_PWM
+ bool
+
config SYS_SUPPORTS_APM_EMULATION
bool
config ARCH_MTD_XIP
bool
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ bool
+ def_bool y
+
if OPROFILE
config OPROFILE_ARMV6
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
select ARM_AMBA
+ select HAVE_CLK
help
This enables support for systems based on the Agilent AAEC-2000
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
+ select HAVE_CLK
select ICST525
help
Support for ARM's Integrator platform.
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
+ select HAVE_CLK
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
bool "ARM Ltd. Versatile family"
select ARM_AMBA
select ARM_VIC
+ select HAVE_CLK
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for Cirrus Logic 711x/721x based boards.
-config ARCH_CO285
- bool "Co-EBSA285"
- select FOOTBRIDGE
- select FOOTBRIDGE_ADDIN
- help
- Support for Intel's EBSA285 companion chip.
-
config ARCH_EBSA110
bool "EBSA-110"
select ISA
select ARM_AMBA
select ARM_VIC
select GENERIC_GPIO
+ select HAVE_CLK
+ select HAVE_CLK
select HAVE_GPIO_LIB
help
This enables support for the Cirrus EP93xx series of CPUs.
depends on MMU
select PLAT_IOP
select PCI
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
depends on MMU
select PLAT_IOP
select PCI
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
help
Support for Intel's IOP33X (XScale) family of processors.
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_KIRKWOOD
+ bool "Marvell Kirkwood"
+ select PCI
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the following Marvell Kirkwood series SoCs:
+ 88F6180, 88F6192 and 88F6281.
+
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select GENERIC_GPIO
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
help
Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
System.
help
Support for the Marvell Loki (88RC8480) SoC.
+config ARCH_MV78XX0
+ bool "Marvell MV78xx0"
+ select PCI
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the following Marvell MV78xx0 series SoCs:
+ MV781x0, MV782x0.
+
config ARCH_MXC
bool "Freescale MXC/iMX-based"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
select ARCH_MTD_XIP
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
help
Support for Freescale MXC/iMX-based family of processors
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
+ select HAVE_CLK
help
This enables support for Philips PNX4008 mobile platform.
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_GPIO_LIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select FIQ
select TIMER_ACORN
select ARCH_MAY_HAVE_PC_FDC
+ select HAVE_PATA_PLATFORM
select ISA_DMA_API
select NO_IOPORT
help
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
select TICK_ONESHOT
select HAVE_GPIO_LIB
help
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
+ select HAVE_CLK
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
+ select HAVE_CLK
help
Support for TI's DaVinci platform.
config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_GPIO_LIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
source "arch/arm/mach-loki/Kconfig"
+source "arch/arm/mach-mv78xx0/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-kirkwood/Kconfig"
+
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+ select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
-config NO_IDLE_HZ
- bool "Dynamic tick timer"
- depends on !GENERIC_CLOCKEVENTS
- help
- Select this option if you want to disable continuous timer ticks
- and have them programmed to occur as required. This option saves
- power as the system can remain in idle state for longer.
-
- By default dynamic tick is disabled during the boot, and can be
- manually enabled with:
-
- echo 1 > /sys/devices/system/timer/timer0/dyn_tick
-
- Alternatively, if you want dynamic tick automatically enabled
- during boot, pass "dyntick=enable" via the kernel command string.
-
- Please note that dynamic tick may affect the accuracy of
- timekeeping on some platforms depending on the implementation.
- Currently at least OMAP, PXA2xx and SA11x0 platforms are known
- to have accurate timekeeping with dynamic tick.
-
config HZ
int
default 128 if ARCH_L7200
config LEDS
bool "Timer and CPU usage LEDs"
- depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+ depends on ARCH_CDB89712 || ARCH_EBSA110 || \
ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \