default y
help
The ARM series is a line of low-power-consumption RISC chip designs
- licensed by ARM ltd and targeted at embedded applications and
+ licensed by ARM Ltd and targeted at embedded applications and
handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
- manufactured, but legacy ARM-based PC hardware remains popular in
+ manufactured, but legacy ARM-based PC hardware remains popular in
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
config FIQ
bool
+config ARCH_MTD_XIP
+ bool
+
+config VECTORS_BASE
+ hex
+ default 0xffff0000 if MMU
+ default DRAM_BASE if REMAP_VECTORS_TO_RAM
+ default 0x00000000
+ help
+ The base address of exception vectors.
+
source "init/Kconfig"
menu "System Type"
choice
prompt "ARM system type"
- default ARCH_RPC
+ default ARCH_VERSATILE
config ARCH_CLPS7500
bool "Cirrus-CL-PS7500FE"
select TIMER_ACORN
select ISA
+ help
+ Support for the Cirrus Logic PS7500FE system-on-a-chip.
config ARCH_CLPS711X
bool "CLPS711x/EP721x-based"
+ help
+ Support for Cirrus Logic 711x/721x based boards.
config ARCH_CO285
bool "Co-EBSA285"
select FOOTBRIDGE
select FOOTBRIDGE_ADDIN
+ help
+ Support for Intel's EBSA285 companion chip.
config ARCH_EBSA110
bool "EBSA-110"
select ISA
help
This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an onboard
+ from Digital. It has limited hardware on-board, including an
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
+config ARCH_EP93XX
+ bool "EP93xx-based"
+ select ARM_AMBA
+ select ARM_VIC
+ help
+ This enables support for the Cirrus EP93xx series of CPUs.
+
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
+ help
+ Support for systems based on the DC21285 companion chip
+ ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_INTEGRATOR
bool "Integrator"
select ARM_AMBA
select ICST525
+ help
+ Support for ARM's Integrator platform.
config ARCH_IOP3XX
bool "IOP3xx-based"
select PCI
+ help
+ Support for Intel's IOP3XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
select DMABOUNCE
select PCI
+ help
+ Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
select PCI
+ help
+ Support for Intel's IXP2400/2800 (XScale) family of processors.
+
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
+ select PCI
+ help
+ Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
config ARCH_PXA
bool "PXA2xx-based"
+ select ARCH_MTD_XIP
+ help
+ Support for Intel's PXA2XX processor line.
config ARCH_RPC
bool "RiscPC"
bool "SA1100-based"
select ISA
select ARCH_DISCONTIGMEM_ENABLE
+ select ARCH_MTD_XIP
+ help
+ Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
- the Samsung SMDK2410 development board (and derviatives).
+ the Samsung SMDK2410 development board (and derivatives).
config ARCH_SHARK
bool "Shark"
select ISA
select ISA_DMA
select PCI
+ help
+ Support for the StrongARM based Digital DNARD machine, also known
+ as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_LH7A40X
bool "Sharp LH7A40X"
config ARCH_OMAP
bool "TI OMAP"
+ help
+ Support for TI's OMAP platform (OMAP1 and OMAP2).
config ARCH_VERSATILE
bool "Versatile"
config ARCH_IMX
bool "IMX"
+ help
+ Support for Motorola's i.MX family of processors (MX1, MXL).
config ARCH_H720X
bool "Hynix-HMS720x-based"
config ARCH_AT91RM9200
bool "AT91RM9200"
help
- Say Y here if you intend to run this kernel on an AT91RM9200-based
- board.
+ Say Y here if you intend to run this kernel on an Atmel
+ AT91RM9200-based board.
endchoice
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-ep93xx/Kconfig"
+
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-ixp2000/Kconfig"
+source "arch/arm/mach-ixp23xx/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
Currently at least OMAP, PXA2xx and SA11x0 platforms are known
to have accurate timekeeping with dynamic tick.
+config HZ
+ int
+ default 128 if ARCH_L7200
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410
+ default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+ default 100
+
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
To use this you need GCC version 4.0.0 or later.
config OABI_COMPAT
- bool "Allow old ABI binaries to run with this kernel"
- depends on AEABI
+ bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
+ depends on AEABI && EXPERIMENTAL
default y
help
This option preserves the old syscall interface along with the
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+ || ARCH_IXP23XX
source "drivers/ide/Kconfig"
endif
source "drivers/spi/Kconfig"
+source "drivers/w1/Kconfig"
+
source "drivers/hwmon/Kconfig"
#source "drivers/l3/Kconfig"
git.samba.org / sfrench / cifs-2.6.git / blobdiff