Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', 'omap...

[sfrench/cifs-2.6.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 63ef7cf852a73bddecb3c6c3518fd30f6a23aa30..b92925c701726037c427227ceb1b89c377558e74 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -84,6 +84,11 @@ config STACKTRACE_SUPPORT
        bool
        default y
 
+config HAVE_LATENCYTOP_SUPPORT
+       bool
+       depends on !SMP
+       default y
+
 config LOCKDEP_SUPPORT
        bool
        default y
@@ -147,6 +152,10 @@ config FIQ
 config ARCH_MTD_XIP
        bool
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+       bool
+       def_bool y
+
 if OPROFILE
 
 config OPROFILE_ARMV6
@@ -232,13 +241,6 @@ config ARCH_CLPS711X
        help
          Support for Cirrus Logic 711x/721x based boards.
 
-config ARCH_CO285
-       bool "Co-EBSA285"
-       select FOOTBRIDGE
-       select FOOTBRIDGE_ADDIN
-       help
-         Support for Intel's EBSA285 companion chip.
-
 config ARCH_EBSA110
        bool "EBSA-110"
        select ISA
@@ -351,6 +353,16 @@ config ARCH_L7200
          If you have any questions or comments about the Linux kernel port
          to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_KIRKWOOD
+       bool "Marvell Kirkwood"
+       select PCI
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
+       select PLAT_ORION
+       help
+         Support for the following Marvell Kirkwood series SoCs:
+         88F6180, 88F6192 and 88F6281.
+
 config ARCH_KS8695
        bool "Micrel/Kendin KS8695"
        select GENERIC_GPIO
@@ -369,6 +381,24 @@ config ARCH_NS9XXX
 
          <http://www.digi.com/products/microprocessors/index.jsp>
 
+config ARCH_LOKI
+       bool "Marvell Loki (88RC8480)"
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
+       select PLAT_ORION
+       help
+         Support for the Marvell Loki (88RC8480) SoC.
+
+config ARCH_MV78XX0
+       bool "Marvell MV78xx0"
+       select PCI
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
+       select PLAT_ORION
+       help
+         Support for the following Marvell MV78xx0 series SoCs:
+         MV781x0, MV782x0.
+
 config ARCH_MXC
        bool "Freescale MXC/iMX-based"
        select ARCH_MTD_XIP
@@ -385,7 +415,8 @@ config ARCH_ORION5X
        select PLAT_ORION
        help
          Support for the following Marvell Orion 5x series SoCs:
-         Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
+         Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+         Orion-2 (5281).
 
 config ARCH_PNX4008
        bool "Philips Nexperia PNX4008 Mobile"
@@ -410,6 +441,7 @@ config ARCH_RPC
        select FIQ
        select TIMER_ACORN
        select ARCH_MAY_HAVE_PC_FDC
+       select HAVE_PATA_PLATFORM
        select ISA_DMA_API
        select NO_IOPORT
        help
@@ -506,6 +538,10 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-loki/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
@@ -518,6 +554,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
@@ -707,27 +745,6 @@ config PREEMPT
          Say Y here if you are building a kernel for a desktop, embedded
          or real-time system.  Say N if you are unsure.
 
-config NO_IDLE_HZ
-       bool "Dynamic tick timer"
-       depends on !GENERIC_CLOCKEVENTS
-       help
-         Select this option if you want to disable continuous timer ticks
-         and have them programmed to occur as required. This option saves
-         power as the system can remain in idle state for longer.
-
-         By default dynamic tick is disabled during the boot, and can be
-         manually enabled with:
-
-           echo 1 > /sys/devices/system/timer/timer0/dyn_tick
-
-         Alternatively, if you want dynamic tick automatically enabled
-         during boot, pass "dyntick=enable" via the kernel command string.
-
-         Please note that dynamic tick may affect the accuracy of
-         timekeeping on some platforms depending on the implementation.
-         Currently at least OMAP, PXA2xx and SA11x0 platforms are known
-         to have accurate timekeeping with dynamic tick.
-
 config HZ
        int
        default 128 if ARCH_L7200
@@ -793,7 +810,7 @@ source "mm/Kconfig"
 
 config LEDS
        bool "Timer and CPU usage LEDs"
-       depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+       depends on ARCH_CDB89712 || ARCH_EBSA110 || \
                   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
                   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \