VERSION = 3
-PATCHLEVEL = 16
+PATCHLEVEL = 17
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc1
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
# descending is started. They are now explicitly listed as the
# prepare rule.
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
KBUILD_VERBOSE = 0
endif
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
+endif
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
+endif
+endif
+
+export quiet Q KBUILD_VERBOSE
+
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
# Fake the "Entering directory" message once, so that IDEs/editors are
# able to understand relative filenames.
+ echodir := @echo
+ quiet_echodir := @echo
+silent_echodir := @:
sub-make: FORCE
- @echo "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
+ $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-# $(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
- quiet =
- Q =
-else
- quiet=quiet_
- Q = @
-endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
-ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
- quiet=silent_
-endif
-else # make-3.8x
-ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
- quiet=silent_
-endif
-endif
-
-export quiet Q KBUILD_VERBOSE
-
ifneq ($(CC),)
ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
COMPILER := clang
INSTALLKERNEL := installkernel
DEPMOD = /sbin/depmod
PERL = perl
+PYTHON = python
CHECK = sparse
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM STRIP OBJCOPY OBJDUMP
-export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
KBUILD_CFLAGS += -O2
endif
+# Tell gcc to never replace conditional load with a non-conditional one
+KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
+
ifdef CONFIG_READABLE_ASM
# Disable optimizations that make assembler listings hard to read.
# reorder blocks reorders the control in the function
endif
# Handle stack protector mode.
+#
+# Since kbuild can potentially perform two passes (first with the old
+# .config values and then with updated .config values), we cannot error out
+# if a desired compiler option is unsupported. If we were to error, kbuild
+# could never get to the second pass and actually notice that we changed
+# the option to something that was supported.
+#
+# Additionally, we don't want to fallback and/or silently change which compiler
+# flags will be used, since that leads to producing kernels with different
+# security feature characteristics depending on the compiler used. ("But I
+# selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!")
+#
+# The middle ground is to warn here so that the failed option is obvious, but
+# to let the build fail with bad compiler flags so that we can't produce a
+# kernel when there is a CONFIG and compiler mismatch.
+#
ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
stackp-flag := -fstack-protector
ifeq ($(call cc-option, $(stackp-flag)),)
# source of a reference will be _MergedGlobals and not on of the whitelisted names.
# See modpost pattern 2
KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
+KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
else
# This warning generated too much noise in a regular build.
endif
endif
+KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)
+
ifdef CONFIG_DEBUG_INFO
+ifdef CONFIG_DEBUG_INFO_SPLIT
+KBUILD_CFLAGS += $(call cc-option, -gsplit-dwarf, -g)
+else
KBUILD_CFLAGS += -g
+endif
KBUILD_AFLAGS += -Wa,-gdwarf-2
endif
+ifdef CONFIG_DEBUG_INFO_DWARF4
+KBUILD_CFLAGS += $(call cc-option, -gdwarf-4,)
+endif
ifdef CONFIG_DEBUG_INFO_REDUCED
KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \
$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
+# ---------------------------------------------------------------------------
+# Kernel selftest
+
+PHONY += kselftest
+kselftest:
+ $(Q)$(MAKE) -C tools/testing/selftests run_tests
+
# ---------------------------------------------------------------------------
# Modules
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
-package-dir := $(srctree)/scripts/package
+package-dir := scripts/package
%src-pkg: FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' gtags - Generate GNU GLOBAL index'
- @echo ' kernelrelease - Output the release version string'
- @echo ' kernelversion - Output the version stored in Makefile'
- @echo ' image_name - Output the image name'
+ @echo ' kernelrelease - Output the release version string (use with make -s)'
+ @echo ' kernelversion - Output the version stored in Makefile (use with make -s)'
+ @echo ' image_name - Output the image name (use with make -s)'
@echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
echo ' (default: $(INSTALL_HDR_PATH))'; \
echo ''
@echo ' headerdep - Detect inclusion cycles in headers'
@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
@echo ''
+ @echo 'Kernel selftest'
+ @echo ' kselftest - Build and run kernel selftest (run as root)'
+ @echo ' Build, install, and boot kernel before'
+ @echo ' running kselftest on it'
+ @echo ''
@echo 'Kernel packaging:'
@$(MAKE) $(build)=$(package-dir) help
@echo ''
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '*.ko.*' \
+ -o -name '*.dwo' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
git.samba.org / sfrench / cifs-2.6.git / blobdiff