# SPDX-License-Identifier: GPL-2.0
-VERSION = 5
-PATCHLEVEL = 14
+VERSION = 6
+PATCHLEVEL = 9
SUBLEVEL = 0
-EXTRAVERSION =
-NAME = Opossums on Parade
+EXTRAVERSION = -rc4
+NAME = Hurr durr I'ma ninja sloth
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
+ifeq ($(filter undefine,$(.FEATURES)),)
+$(error GNU Make >= 3.82 is required. Your Make version is $(MAKE_VERSION))
+endif
+
$(if $(filter __%, $(MAKECMDGOALS)), \
$(error targets prefixed with '__' are only for internal use))
# descending is started. They are now explicitly listed as the
# prepare rule.
+this-makefile := $(lastword $(MAKEFILE_LIST))
+abs_srctree := $(realpath $(dir $(this-makefile)))
+abs_objtree := $(CURDIR)
+
ifneq ($(sub_make_done),1)
# Do not use make's built-in rules and variables
# Beautify output
# ---------------------------------------------------------------------------
#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
+# Most of build commands in Kbuild start with "cmd_". You can optionally define
+# "quiet_cmd_*". If defined, the short log is printed. Otherwise, no log from
+# that command is printed by default.
#
-# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
+# e.g.)
+# quiet_cmd_depmod = DEPMOD $(MODLIB)
+# cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE)
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
-# $(Q)ln $@ :<
+# $(Q)$(MAKE) $(build)=scripts/basic
#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-# If KBUILD_VERBOSE equals 2 then give the reason why each target is rebuilt.
+# If KBUILD_VERBOSE contains 1, the whole command is echoed.
+# If KBUILD_VERBOSE contains 2, the reason for rebuilding is printed.
#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
ifeq ("$(origin V)", "command line")
KBUILD_VERBOSE = $(V)
endif
-ifndef KBUILD_VERBOSE
- KBUILD_VERBOSE = 0
-endif
-ifeq ($(KBUILD_VERBOSE),1)
+quiet = quiet_
+Q = @
+
+ifneq ($(findstring 1, $(KBUILD_VERBOSE)),)
quiet =
Q =
-else
- quiet=quiet_
- Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
+# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
-ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
- quiet=silent_
- KBUILD_VERBOSE = 0
+ifeq ($(filter 3.%,$(MAKE_VERSION)),)
+short-opts := $(firstword -$(MAKEFLAGS))
+else
+short-opts := $(filter-out --%,$(MAKEFLAGS))
+endif
+
+ifneq ($(findstring s,$(short-opts)),)
+quiet=silent_
+override KBUILD_VERBOSE :=
endif
export quiet Q KBUILD_VERBOSE
export KBUILD_CHECKSRC
+# Enable "clippy" (a linter) as part of the Rust compilation.
+#
+# Use 'make CLIPPY=1' to enable it.
+ifeq ("$(origin CLIPPY)", "command line")
+ KBUILD_CLIPPY := $(CLIPPY)
+endif
+
+export KBUILD_CLIPPY
+
# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the
# directory of external module to build. Setting M= takes precedence.
ifeq ("$(origin M)", "command line")
$(if $(word 2, $(KBUILD_EXTMOD)), \
$(error building multiple external modules is not supported))
+$(foreach x, % :, $(if $(findstring $x, $(KBUILD_EXTMOD)), \
+ $(error module directory path cannot contain '$x')))
+
# Remove trailing slashes
ifneq ($(filter %/, $(KBUILD_EXTMOD)),)
KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).)
export KBUILD_EXTMOD
+# backward compatibility
+KBUILD_EXTRA_WARN ?= $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)
+
+ifeq ("$(origin W)", "command line")
+ KBUILD_EXTRA_WARN := $(W)
+endif
+
+export KBUILD_EXTRA_WARN
+
# Kbuild will save output files in the current working directory.
# This does not need to match to the root of the kernel source tree.
#
endif
ifneq ($(KBUILD_OUTPUT),)
-# Make's built-in functions such as $(abspath ...), $(realpath ...) cannot
-# expand a shell special character '~'. We use a somewhat tedious way here.
-abs_objtree := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd)
-$(if $(abs_objtree),, \
- $(error failed to create output directory "$(KBUILD_OUTPUT)"))
-
+# $(realpath ...) gets empty if the path does not exist. Run 'mkdir -p' first.
+$(shell mkdir -p "$(KBUILD_OUTPUT)")
# $(realpath ...) resolves symlinks
-abs_objtree := $(realpath $(abs_objtree))
-else
-abs_objtree := $(CURDIR)
+abs_objtree := $(realpath $(KBUILD_OUTPUT))
+$(if $(abs_objtree),,$(error failed to create output directory "$(KBUILD_OUTPUT)"))
endif # ifneq ($(KBUILD_OUTPUT),)
-ifeq ($(abs_objtree),$(CURDIR))
-# Suppress "Entering directory ..." unless we are changing the work directory.
-MAKEFLAGS += --no-print-directory
-else
-need-sub-make := 1
-endif
-
-this-makefile := $(lastword $(MAKEFILE_LIST))
-abs_srctree := $(realpath $(dir $(this-makefile)))
-
ifneq ($(words $(subst :, ,$(abs_srctree))), 1)
$(error source directory cannot contain spaces or colons)
endif
-ifneq ($(abs_srctree),$(abs_objtree))
-# Look for make include files relative to root of kernel src
-#
-# --included-dir is added for backward compatibility, but you should not rely on
-# it. Please add $(srctree)/ prefix to include Makefiles in the source tree.
-MAKEFLAGS += --include-dir=$(abs_srctree)
-endif
-
ifneq ($(filter 3.%,$(MAKE_VERSION)),)
# 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x
# We need to invoke sub-make to avoid implicit rules in the top Makefile.
$(this-makefile): ;
endif
-export abs_srctree abs_objtree
export sub_make_done := 1
+endif # sub_make_done
+
+ifeq ($(abs_objtree),$(CURDIR))
+# Suppress "Entering directory ..." if we are at the final work directory.
+no-print-directory := --no-print-directory
+else
+# Recursion to show "Entering directory ..."
+need-sub-make := 1
+endif
+
+ifeq ($(filter --no-print-directory, $(MAKEFLAGS)),)
+# If --no-print-directory is unset, recurse once again to set it.
+# You may end up recursing into __sub-make twice. This is needed due to the
+# behavior change in GNU Make 4.4.1.
+need-sub-make := 1
+endif
+
ifeq ($(need-sub-make),1)
PHONY += $(MAKECMDGOALS) __sub-make
# Invoke a second make in the output directory, passing relevant variables
__sub-make:
- $(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS)
+ $(Q)$(MAKE) $(no-print-directory) -C $(abs_objtree) \
+ -f $(abs_srctree)/Makefile $(MAKECMDGOALS)
-endif # need-sub-make
-endif # sub_make_done
+else # need-sub-make
# We process the rest of the Makefile if this is the final invocation of make
-ifeq ($(need-sub-make),)
-
-# Do not print "Entering directory ...",
-# but we want to display it when entering to the output directory
-# so that IDEs/editors are able to understand relative filenames.
-MAKEFLAGS += --no-print-directory
ifeq ($(abs_srctree),$(abs_objtree))
# building in the source tree
cscope gtags TAGS tags help% %docs check% coccicheck \
$(version_h) headers headers_% archheaders archscripts \
%asm-generic kernelversion %src-pkg dt_binding_check \
- outputmakefile
-# Installation targets should not require compiler. Unfortunately, vdso_install
-# is an exception where build artifacts may be updated. This must be fixed.
-no-compiler-targets := $(no-dot-config-targets) install dtbs_install \
- headers_install modules_install kernelrelease image_name
-no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease \
+ outputmakefile rustavailable rustfmt rustfmtcheck
+no-sync-config-targets := $(no-dot-config-targets) %install modules_sign kernelrelease \
image_name
-single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/
+single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %.symtypes %/
config-build :=
mixed-build :=
need-config := 1
-need-compiler := 1
may-sync-config := 1
single-build :=
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
- ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
- need-config :=
- endif
-endif
-
-ifneq ($(filter $(no-compiler-targets), $(MAKECMDGOALS)),)
- ifeq ($(filter-out $(no-compiler-targets), $(MAKECMDGOALS)),)
- need-compiler :=
- endif
+ ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ need-config :=
+ endif
endif
ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),)
- ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
- may-sync-config :=
- endif
+ ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
+ may-sync-config :=
+ endif
endif
+need-compiler := $(may-sync-config)
+
ifneq ($(KBUILD_EXTMOD),)
- may-sync-config :=
+ may-sync-config :=
endif
ifeq ($(KBUILD_EXTMOD),)
- ifneq ($(filter %config,$(MAKECMDGOALS)),)
- config-build := 1
- ifneq ($(words $(MAKECMDGOALS)),1)
- mixed-build := 1
- endif
+ ifneq ($(filter %config,$(MAKECMDGOALS)),)
+ config-build := 1
+ ifneq ($(words $(MAKECMDGOALS)),1)
+ mixed-build := 1
endif
+ endif
endif
# We cannot build single targets and the others at the same time
ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
- single-build := 1
- ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
- mixed-build := 1
- endif
+ single-build := 1
+ ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
+ mixed-build := 1
+ endif
endif
# For "make -j clean all", "make -j mrproper defconfig all", etc.
ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
- ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
- mixed-build := 1
- endif
+ ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
+ mixed-build := 1
+ endif
endif
# install and modules_install need also be processed one by one
ifneq ($(filter install,$(MAKECMDGOALS)),)
- ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
- mixed-build := 1
- endif
+ ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
+ mixed-build := 1
+ endif
endif
ifdef mixed-build
include $(srctree)/scripts/Kbuild.include
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELRELEASE = $(call read-file, include/config/kernel.release)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
# When performing cross compilation for other architectures ARCH shall be set
# to the target architecture. (See arch/* for the possibilities).
# ARCH can be set during invocation of make:
-# make ARCH=ia64
+# make ARCH=arm64
# Another way is to have ARCH set in the environment.
# The default ARCH is the host where make is executed.
# during compilation. Only gcc and related bin-utils executables
# are prefixed with $(CROSS_COMPILE).
# CROSS_COMPILE can be set on the command line
-# make CROSS_COMPILE=ia64-linux-
+# make CROSS_COMPILE=aarch64-linux-gnu-
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
ifneq ($(LLVM),)
-HOSTCC = clang
-HOSTCXX = clang++
+ifneq ($(filter %/,$(LLVM)),)
+LLVM_PREFIX := $(LLVM)
+else ifneq ($(filter -%,$(LLVM)),)
+LLVM_SUFFIX := $(LLVM)
+endif
+
+HOSTCC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX)
+HOSTCXX = $(LLVM_PREFIX)clang++$(LLVM_SUFFIX)
else
HOSTCC = gcc
HOSTCXX = g++
endif
-
-export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
- -O2 -fomit-frame-pointer -std=gnu89
-export KBUILD_USERLDFLAGS :=
-
-KBUILD_HOSTCFLAGS := $(KBUILD_USERCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
+HOSTRUSTC = rustc
+HOSTPKG_CONFIG = pkg-config
+
+KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
+ -O2 -fomit-frame-pointer -std=gnu11
+KBUILD_USERCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS)
+KBUILD_USERLDFLAGS := $(USERLDFLAGS)
+
+# These flags apply to all Rust code in the tree, including the kernel and
+# host programs.
+export rust_common_flags := --edition=2021 \
+ -Zbinary_dep_depinfo=y \
+ -Dunsafe_op_in_unsafe_fn -Drust_2018_idioms \
+ -Dunreachable_pub -Dnon_ascii_idents \
+ -Wmissing_docs \
+ -Drustdoc::missing_crate_level_docs \
+ -Dclippy::correctness -Dclippy::style \
+ -Dclippy::suspicious -Dclippy::complexity \
+ -Dclippy::perf \
+ -Dclippy::let_unit_value -Dclippy::mut_mut \
+ -Dclippy::needless_bitwise_bool \
+ -Dclippy::needless_continue \
+ -Dclippy::no_mangle_with_rust_abi \
+ -Wclippy::dbg_macro
+
+KBUILD_HOSTCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
+KBUILD_HOSTRUSTFLAGS := $(rust_common_flags) -O -Cstrip=debuginfo \
+ -Zallow-features= $(HOSTRUSTFLAGS)
KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
# Make variables (CC, etc...)
CPP = $(CC) -E
ifneq ($(LLVM),)
-CC = clang
-LD = ld.lld
-AR = llvm-ar
-NM = llvm-nm
-OBJCOPY = llvm-objcopy
-OBJDUMP = llvm-objdump
-READELF = llvm-readelf
-STRIP = llvm-strip
+CC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX)
+LD = $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX)
+AR = $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX)
+NM = $(LLVM_PREFIX)llvm-nm$(LLVM_SUFFIX)
+OBJCOPY = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
+OBJDUMP = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
+READELF = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
+STRIP = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
else
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)ld
READELF = $(CROSS_COMPILE)readelf
STRIP = $(CROSS_COMPILE)strip
endif
+RUSTC = rustc
+RUSTDOC = rustdoc
+RUSTFMT = rustfmt
+CLIPPY_DRIVER = clippy-driver
+BINDGEN = bindgen
+CARGO = cargo
PAHOLE = pahole
RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids
LEX = flex
YACC = bison
AWK = awk
INSTALLKERNEL := installkernel
-DEPMOD = depmod
PERL = perl
PYTHON3 = python3
CHECK = sparse
-Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
NOSTDINC_FLAGS :=
CFLAGS_MODULE =
+RUSTFLAGS_MODULE =
AFLAGS_MODULE =
LDFLAGS_MODULE =
CFLAGS_KERNEL =
+RUSTFLAGS_KERNEL =
AFLAGS_KERNEL =
LDFLAGS_vmlinux =
$(USERINCLUDE)
KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE
-KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \
- -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
- -Werror=implicit-function-declaration -Werror=implicit-int \
- -Werror=return-type -Wno-format-security \
- -std=gnu89
+
+KBUILD_CFLAGS :=
+KBUILD_CFLAGS += -std=gnu11
+KBUILD_CFLAGS += -fshort-wchar
+KBUILD_CFLAGS += -funsigned-char
+KBUILD_CFLAGS += -fno-common
+KBUILD_CFLAGS += -fno-PIE
+KBUILD_CFLAGS += -fno-strict-aliasing
+
KBUILD_CPPFLAGS := -D__KERNEL__
+KBUILD_RUSTFLAGS := $(rust_common_flags) \
+ -Cpanic=abort -Cembed-bitcode=n -Clto=n \
+ -Cforce-unwind-tables=n -Ccodegen-units=1 \
+ -Csymbol-mangling-version=v0 \
+ -Crelocation-model=static \
+ -Zfunction-sections=n \
+ -Dclippy::float_arithmetic
+
KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
+KBUILD_RUSTFLAGS_KERNEL :=
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
+KBUILD_RUSTFLAGS_MODULE := --cfg MODULE
KBUILD_LDFLAGS_MODULE :=
KBUILD_LDFLAGS :=
CLANG_FLAGS :=
-export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
+ifeq ($(KBUILD_CLIPPY),1)
+ RUSTC_OR_CLIPPY_QUIET := CLIPPY
+ RUSTC_OR_CLIPPY = $(CLIPPY_DRIVER)
+else
+ RUSTC_OR_CLIPPY_QUIET := RUSTC
+ RUSTC_OR_CLIPPY = $(RUSTC)
+endif
+
+ifdef RUST_LIB_SRC
+ export RUST_LIB_SRC
+endif
+
+# Allows the usage of unstable features in stable compilers.
+export RUSTC_BOOTSTRAP := 1
+
+export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
+export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
+export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
+export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE
export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
-export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
-export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_RUSTFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL
# Files to ignore in find ... statements
export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
-name CVS -o -name .pc -o -name .hg -o -name .git \) \
-prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
- --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
} > Makefile
outputmakefile:
- $(Q)if [ -f $(srctree)/.config -o \
+ @if [ -f $(srctree)/.config -o \
-d $(srctree)/include/config -o \
-d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \
echo >&2 "***"; \
# *config targets only - make sure prerequisites are updated, and descend
# in scripts/kconfig to make the *config target
-# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# Read arch-specific Makefile to set KBUILD_DEFCONFIG as needed.
# KBUILD_DEFCONFIG may point out an alternative default configuration
# used for 'make defconfig'
include $(srctree)/arch/$(SRCARCH)/Makefile
else #!config-build
# ===========================================================================
-# Build targets only - this includes vmlinux, arch specific targets, clean
+# Build targets only - this includes vmlinux, arch-specific targets, clean
# targets and others. In general all targets except *config targets.
# If building an external module we do not care about the all: rule
__all: modules
endif
+targets :=
+
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
ifeq ($(KBUILD_EXTMOD),)
# Objects we will link into vmlinux / subdirs we need to visit
-core-y := init/ usr/ arch/$(SRCARCH)/
-drivers-y := drivers/ sound/
-drivers-$(CONFIG_SAMPLES) += samples/
-drivers-$(CONFIG_NET) += net/
-drivers-y += virt/
+core-y :=
+drivers-y :=
libs-y := lib/
endif # KBUILD_EXTMOD
CC_FLAGS_FTRACE := -pg
endif
-ifdef CONFIG_CC_IS_GCC
-RETPOLINE_CFLAGS := $(call cc-option,-mindirect-branch=thunk-extern -mindirect-branch-register)
-RETPOLINE_VDSO_CFLAGS := $(call cc-option,-mindirect-branch=thunk-inline -mindirect-branch-register)
-endif
-ifdef CONFIG_CC_IS_CLANG
-RETPOLINE_CFLAGS := -mretpoline-external-thunk
-RETPOLINE_VDSO_CFLAGS := -mretpoline
-endif
-export RETPOLINE_CFLAGS
-export RETPOLINE_VDSO_CFLAGS
-
include $(srctree)/arch/$(SRCARCH)/Makefile
ifdef need-config
#
# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
# so you cannot notice that Kconfig is waiting for the user input.
-%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
+%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h %/generated/rustc_cfg: $(KCONFIG_CONFIG)
$(Q)$(kecho) " SYNC $@"
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
else # !may-sync-config
PHONY += include/config/auto.conf
include/config/auto.conf:
- $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
+ @test -e include/generated/autoconf.h -a -e $@ || ( \
echo >&2; \
echo >&2 " ERROR: Kernel configuration is invalid."; \
echo >&2 " include/generated/autoconf.h or $@ are missing.";\
endif # need-config
KBUILD_CFLAGS += -fno-delete-null-pointer-checks
-KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
-KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation)
-KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
-KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
KBUILD_CFLAGS += -O2
-else ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3
-KBUILD_CFLAGS += -O3
+KBUILD_RUSTFLAGS += -Copt-level=2
else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += -Os
+KBUILD_RUSTFLAGS += -Copt-level=s
endif
+# Always set `debug-assertions` and `overflow-checks` because their default
+# depends on `opt-level` and `debug-assertions`, respectively.
+KBUILD_RUSTFLAGS += -Cdebug-assertions=$(if $(CONFIG_RUST_DEBUG_ASSERTIONS),y,n)
+KBUILD_RUSTFLAGS += -Coverflow-checks=$(if $(CONFIG_RUST_OVERFLOW_CHECKS),y,n)
+
# Tell gcc to never replace conditional load with a non-conditional one
ifdef CONFIG_CC_IS_GCC
# gcc-10 renamed --param=allow-store-data-races=0 to
KBUILD_CFLAGS += -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining
endif
-ifneq ($(CONFIG_FRAME_WARN),0)
-KBUILD_CFLAGS += -Wframe-larger-than=$(CONFIG_FRAME_WARN)
-endif
-
stackp-flags-y := -fno-stack-protector
stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector
stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong
KBUILD_CFLAGS += $(stackp-flags-y)
-KBUILD_CFLAGS-$(CONFIG_WERROR) += -Werror
-KBUILD_CFLAGS += $(KBUILD_CFLAGS-y)
-
-ifdef CONFIG_CC_IS_CLANG
-KBUILD_CPPFLAGS += -Qunused-arguments
-# The kernel builds with '-std=gnu89' so use of GNU extensions is acceptable.
-KBUILD_CFLAGS += -Wno-gnu
-# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
-# source of a reference will be _MergedGlobals and not on of the whitelisted names.
-# See modpost pattern 2
-KBUILD_CFLAGS += -mno-global-merge
-else
-
-# Warn about unmarked fall-throughs in switch statement.
-# Disabled for clang while comment to attribute conversion happens and
-# https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
-KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough=5,)
-# gcc inanely warns about local variables called 'main'
-KBUILD_CFLAGS += -Wno-main
-endif
-
-# These warnings generated too much noise in a regular build.
-# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
-KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
-KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
+KBUILD_RUSTFLAGS-$(CONFIG_WERROR) += -Dwarnings
+KBUILD_RUSTFLAGS += $(KBUILD_RUSTFLAGS-y)
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
+KBUILD_RUSTFLAGS += -Cforce-frame-pointers=y
else
# Some targets (ARM with Thumb2, for example), can't be built with frame
# pointers. For those, we don't have FUNCTION_TRACER automatically
# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
# incompatible with -fomit-frame-pointer with current GCC, so we don't use
# -fomit-frame-pointer with FUNCTION_TRACER.
+# In the Rust target specification, "frame-pointer" is set explicitly
+# to "may-omit".
ifndef CONFIG_FUNCTION_TRACER
KBUILD_CFLAGS += -fomit-frame-pointer
endif
# Initialize all stack variables with a zero value.
ifdef CONFIG_INIT_STACK_ALL_ZERO
-# Future support for zero initialization is still being debated, see
-# https://bugs.llvm.org/show_bug.cgi?id=45497. These flags are subject to being
-# renamed or dropped.
KBUILD_CFLAGS += -ftrivial-auto-var-init=zero
-KBUILD_CFLAGS += -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
+ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
+# https://github.com/llvm/llvm-project/issues/44842
+CC_AUTO_VAR_INIT_ZERO_ENABLER := -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
+export CC_AUTO_VAR_INIT_ZERO_ENABLER
+KBUILD_CFLAGS += $(CC_AUTO_VAR_INIT_ZERO_ENABLER)
+endif
endif
# While VLAs have been removed, GCC produces unreachable stack probes
KBUILD_CFLAGS += -fzero-call-used-regs=used-gpr
endif
-DEBUG_CFLAGS :=
-
-# Workaround for GCC versions < 5.0
-# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801
-ifdef CONFIG_CC_IS_GCC
-DEBUG_CFLAGS += $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments))
-endif
-
-ifdef CONFIG_DEBUG_INFO
-
-ifdef CONFIG_DEBUG_INFO_SPLIT
-DEBUG_CFLAGS += -gsplit-dwarf
-else
-DEBUG_CFLAGS += -g
-endif
-
-ifndef CONFIG_AS_IS_LLVM
-KBUILD_AFLAGS += -Wa,-gdwarf-2
-endif
-
-ifndef CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
-dwarf-version-$(CONFIG_DEBUG_INFO_DWARF4) := 4
-dwarf-version-$(CONFIG_DEBUG_INFO_DWARF5) := 5
-DEBUG_CFLAGS += -gdwarf-$(dwarf-version-y)
-endif
-
-ifdef CONFIG_DEBUG_INFO_REDUCED
-DEBUG_CFLAGS += -fno-var-tracking
-ifdef CONFIG_CC_IS_GCC
-DEBUG_CFLAGS += -femit-struct-debug-baseonly
-endif
-endif
-
-ifdef CONFIG_DEBUG_INFO_COMPRESSED
-DEBUG_CFLAGS += -gz=zlib
-KBUILD_AFLAGS += -gz=zlib
-KBUILD_LDFLAGS += --compress-debug-sections=zlib
-endif
-
-endif # CONFIG_DEBUG_INFO
-
-KBUILD_CFLAGS += $(DEBUG_CFLAGS)
-export DEBUG_CFLAGS
-
ifdef CONFIG_FUNCTION_TRACER
ifdef CONFIG_FTRACE_MCOUNT_USE_CC
CC_FLAGS_FTRACE += -mrecord-mcount
endif
endif
ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
- CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
+ ifdef CONFIG_HAVE_OBJTOOL_NOP_MCOUNT
+ CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
+ endif
endif
ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
ifdef CONFIG_HAVE_C_RECORDMCOUNT
KBUILD_CFLAGS += -fno-inline-functions-called-once
endif
+# `rustc`'s `-Zfunction-sections` applies to data too (as of 1.59.0).
ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
+KBUILD_RUSTFLAGS_KERNEL += -Zfunction-sections=y
LDFLAGS_vmlinux += --gc-sections
endif
ifdef CONFIG_SHADOW_CALL_STACK
+ifndef CONFIG_DYNAMIC_SCS
CC_FLAGS_SCS := -fsanitize=shadow-call-stack
KBUILD_CFLAGS += $(CC_FLAGS_SCS)
+endif
export CC_FLAGS_SCS
endif
# Limit inlining across translation units to reduce binary size
KBUILD_LDFLAGS += -mllvm -import-instr-limit=5
-
-# Check for frame size exceeding threshold during prolog/epilog insertion
-# when using lld < 13.0.0.
-ifneq ($(CONFIG_FRAME_WARN),0)
-ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
-KBUILD_LDFLAGS += -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN)
-endif
-endif
endif
ifdef CONFIG_LTO
endif
ifdef CONFIG_CFI_CLANG
-CC_FLAGS_CFI := -fsanitize=cfi \
- -fsanitize-cfi-cross-dso \
- -fno-sanitize-cfi-canonical-jump-tables \
- -fno-sanitize-trap=cfi \
- -fno-sanitize-blacklist
-
-ifdef CONFIG_CFI_PERMISSIVE
-CC_FLAGS_CFI += -fsanitize-recover=cfi
-endif
-
-# If LTO flags are filtered out, we must also filter out CFI.
-CC_FLAGS_LTO += $(CC_FLAGS_CFI)
+CC_FLAGS_CFI := -fsanitize=kcfi
KBUILD_CFLAGS += $(CC_FLAGS_CFI)
export CC_FLAGS_CFI
endif
-ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B
-KBUILD_CFLAGS += -falign-functions=64
+ifneq ($(CONFIG_FUNCTION_ALIGNMENT),0)
+# Set the minimal function alignment. Use the newer GCC option
+# -fmin-function-alignment if it is available, or fall back to -falign-funtions.
+# See also CONFIG_CC_HAS_SANE_FUNCTION_ALIGNMENT.
+ifdef CONFIG_CC_HAS_MIN_FUNCTION_ALIGNMENT
+KBUILD_CFLAGS += -fmin-function-alignment=$(CONFIG_FUNCTION_ALIGNMENT)
+else
+KBUILD_CFLAGS += -falign-functions=$(CONFIG_FUNCTION_ALIGNMENT)
+endif
endif
# arch Makefile may override CC so keep this after arch Makefile is included
-NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
-
-# warn about C99 declaration after statement
-KBUILD_CFLAGS += -Wdeclaration-after-statement
-
-# Variable Length Arrays (VLAs) should not be used anywhere in the kernel
-KBUILD_CFLAGS += -Wvla
+NOSTDINC_FLAGS += -nostdinc
-# disable pointer signed / unsigned warnings in gcc 4.0
-KBUILD_CFLAGS += -Wno-pointer-sign
+# To gain proper coverage for CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE,
+# the kernel uses only C99 flexible arrays for dynamically sized trailing
+# arrays. Enforce this for everything that may examine structure sizes and
+# perform bounds checking.
+KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
-# disable stringop warnings in gcc 8+
-KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
-
-# We'll want to enable this eventually, but it's not going away for 5.7 at least
-KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
-KBUILD_CFLAGS += -Wno-array-bounds
-KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
-
-# Another good warning that we'll want to enable eventually
-KBUILD_CFLAGS += $(call cc-disable-warning, restrict)
-
-# Enabled with W=2, disabled by default as noisy
-ifdef CONFIG_CC_IS_GCC
-KBUILD_CFLAGS += -Wno-maybe-uninitialized
-endif
+#Currently, disable -Wstringop-overflow for GCC 11, globally.
+KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
+KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += -fno-strict-overflow
KBUILD_CFLAGS += -fconserve-stack
endif
-# Prohibit date/time macros, which would make the build non-deterministic
-KBUILD_CFLAGS += -Werror=date-time
-
-# enforce correct pointer usage
-KBUILD_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types)
-
-# Require designated initializers for all marked structures
-KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init)
-
# change __FILE__ to the relative path from the srctree
KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
# include additional Makefiles when needed
include-y := scripts/Makefile.extrawarn
+include-$(CONFIG_DEBUG_INFO) += scripts/Makefile.debug
+include-$(CONFIG_DEBUG_INFO_BTF)+= scripts/Makefile.btf
include-$(CONFIG_KASAN) += scripts/Makefile.kasan
include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan
+include-$(CONFIG_KMSAN) += scripts/Makefile.kmsan
include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan
include-$(CONFIG_KCOV) += scripts/Makefile.kcov
+include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct
include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins
include $(addprefix $(srctree)/, $(include-y))
# Do not add $(call cc-option,...) below this line. When you build the kernel
# from the clean source tree, the GCC plugins do not exist at this point.
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+# Add user supplied CPPFLAGS, AFLAGS, CFLAGS and RUSTFLAGS as the last assignments
KBUILD_CPPFLAGS += $(KCPPFLAGS)
KBUILD_AFLAGS += $(KAFLAGS)
KBUILD_CFLAGS += $(KCFLAGS)
+KBUILD_RUSTFLAGS += $(KRUSTFLAGS)
KBUILD_LDFLAGS_MODULE += --build-id=sha1
LDFLAGS_vmlinux += --build-id=sha1
+KBUILD_LDFLAGS += -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
+endif
+
ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
-LDFLAGS_vmlinux += $(call ld-option, -X,)
+LDFLAGS_vmlinux += -X
endif
ifeq ($(CONFIG_RELR),y)
-LDFLAGS_vmlinux += --pack-dyn-relocs=relr --use-android-relr-tags
+# ld.lld before 15 did not support -z pack-relative-relocs.
+LDFLAGS_vmlinux += $(call ld-option,--pack-dyn-relocs=relr,-z pack-relative-relocs)
endif
# We never want expected sections to be placed heuristically by the
# linker. All sections should be explicitly named in the linker script.
ifdef CONFIG_LD_ORPHAN_WARN
-LDFLAGS_vmlinux += --orphan-handling=warn
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
endif
# Align the bit size of userspace programs with the kernel
export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps
ifeq ($(KBUILD_EXTMOD),)
-core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
-
-vmlinux-dirs := $(patsubst %/,%,$(filter %/, \
- $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
- $(libs-y) $(libs-m)))
-vmlinux-alldirs := $(sort $(vmlinux-dirs) Documentation \
+build-dir := .
+clean-dirs := $(sort . Documentation \
$(patsubst %/,%,$(filter %/, $(core-) \
$(drivers-) $(libs-))))
-subdir-modorder := $(addsuffix modules.order,$(filter %/, \
- $(core-y) $(core-m) $(libs-y) $(libs-m) \
- $(drivers-y) $(drivers-m)))
-
-build-dirs := $(vmlinux-dirs)
-clean-dirs := $(vmlinux-alldirs)
-
+export ARCH_CORE := $(core-y)
+export ARCH_LIB := $(filter %/, $(libs-y))
+export ARCH_DRIVERS := $(drivers-y) $(drivers-m)
# Externally visible symbols (used by link-vmlinux.sh)
-KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y))
-KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y)))
+
+KBUILD_VMLINUX_OBJS := ./built-in.a
ifdef CONFIG_MODULES
KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y))
else
KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y))
endif
-KBUILD_VMLINUX_OBJS += $(patsubst %/,%/built-in.a, $(drivers-y))
-export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS
+export KBUILD_VMLINUX_LIBS
export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
-# used by scripts/Makefile.package
-export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools)
-
-vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)
-# Recurse until adjust_autoksyms.sh is satisfied
-PHONY += autoksyms_recursive
ifdef CONFIG_TRIM_UNUSED_KSYMS
# For the kernel to actually contain only the needed exported symbols,
# we have to build modules as well to determine what those symbols are.
-# (this can be evaluated only once include/config/auto.conf has been included)
KBUILD_MODULES := 1
-
-autoksyms_recursive: descend modules.order
- $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
- "$(MAKE) -f $(srctree)/Makefile vmlinux"
endif
-autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
-
-quiet_cmd_autoksyms_h = GEN $@
- cmd_autoksyms_h = mkdir -p $(dir $@); \
- $(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@
+# '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14
+quiet_cmd_ar_vmlinux.a = AR $@
+ cmd_ar_vmlinux.a = \
+ rm -f $@; \
+ $(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
+ $(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
-$(autoksyms_h):
- $(call cmd,autoksyms_h)
+targets += vmlinux.a
+vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
+ $(call if_changed,ar_vmlinux.a)
-ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
+PHONY += vmlinux_o
+vmlinux_o: vmlinux.a $(KBUILD_VMLINUX_LIBS)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_o
-# Final link of vmlinux with optional arch pass after final link
-cmd_link-vmlinux = \
- $(CONFIG_SHELL) $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \
- $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
-
-vmlinux: scripts/link-vmlinux.sh autoksyms_recursive $(vmlinux-deps) FORCE
- +$(call if_changed_dep,link-vmlinux)
+vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o
+ @:
-targets := vmlinux
+PHONY += vmlinux
+# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux,
+# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is
+# unrelated; the decompressors just happen to have the same base name,
+# arch/*/boot/compressed/vmlinux.
+# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux.
+#
+# _LDFLAGS_vmlinux is a workaround for the 'private export' bug:
+# https://savannah.gnu.org/bugs/?61463
+# For Make > 4.4, the following simple code will work:
+# vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux)
+vmlinux: vmlinux.o $(KBUILD_LDS) modpost
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
# The actual objects are generated when descending,
# make sure no implicit rule kicks in
-$(sort $(vmlinux-deps) $(subdir-modorder)): descend ;
+$(sort $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)): . ;
-filechk_kernel.release = \
- echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+ifeq ($(origin KERNELRELEASE),file)
+filechk_kernel.release = $(srctree)/scripts/setlocalversion $(srctree)
+else
+filechk_kernel.release = echo $(KERNELRELEASE)
+endif
# Store (new) KERNELRELEASE string in include/config/kernel.release
include/config/kernel.release: FORCE
PHONY += prepare archprepare
archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \
- asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h \
- include/generated/autoconf.h remove-stale-files
+ asm-generic $(version_h) include/generated/utsrelease.h \
+ include/generated/compile.h include/generated/autoconf.h remove-stale-files
prepare0: archprepare
$(Q)$(MAKE) $(build)=scripts/mod
- $(Q)$(MAKE) $(build)=.
+ $(Q)$(MAKE) $(build)=. prepare
# All the preparing..
prepare: prepare0
+ifdef CONFIG_RUST
+ +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh
+ $(Q)$(MAKE) $(build)=rust
+endif
PHONY += remove-stale-files
remove-stale-files:
echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)
endef
-$(version_h): PATCHLEVEL := $(if $(PATCHLEVEL), $(PATCHLEVEL), 0)
-$(version_h): SUBLEVEL := $(if $(SUBLEVEL), $(SUBLEVEL), 0)
+$(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0)
+$(version_h): SUBLEVEL := $(or $(SUBLEVEL), 0)
$(version_h): FORCE
$(call filechk,version.h)
include/generated/utsrelease.h: include/config/kernel.release FORCE
$(call filechk,utsrelease.h)
+filechk_compile.h = $(srctree)/scripts/mkcompile_h \
+ "$(UTS_MACHINE)" "$(CONFIG_CC_VERSION_TEXT)" "$(LD)"
+
+include/generated/compile.h: FORCE
+ $(call filechk,compile.h)
+
PHONY += headerdep
headerdep:
$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
PHONY += headers
headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
- $(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \
- $(error Headers not exportable for the $(SRCARCH) architecture))
+ $(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML))
$(Q)$(MAKE) $(hdr-inst)=include/uapi
$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi
-# Deprecated. It is no-op now.
-PHONY += headers_check
-headers_check:
- @echo >&2 "=================== WARNING ==================="
- @echo >&2 "Since Linux 5.5, 'make headers_check' is no-op,"
- @echo >&2 "and will be removed after Linux 5.15 release."
- @echo >&2 "Please remove headers_check from your scripts."
- @echo >&2 "==============================================="
-
ifdef CONFIG_HEADERS_INSTALL
prepare: headers
endif
# Install
# Many distributions have the custom install script, /sbin/installkernel.
-# If DKMS is installed, 'make install' will eventually recuses back
-# to the this Makefile to build and install external modules.
+# If DKMS is installed, 'make install' will eventually recurse back
+# to this Makefile to build and install external modules.
# Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
-install: sub_make_done :=
+quiet_cmd_install = INSTALL $(INSTALL_PATH)
+ cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
+
+# ---------------------------------------------------------------------------
+# vDSO install
+
+PHONY += vdso_install
+vdso_install: export INSTALL_FILES = $(vdso-install-y)
+vdso_install:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst
# ---------------------------------------------------------------------------
# Tools
-ifdef CONFIG_STACK_VALIDATION
+ifdef CONFIG_OBJTOOL
prepare: tools/objtool
endif
# Kernel selftest
PHONY += kselftest
-kselftest:
+kselftest: headers
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
-kselftest-%: FORCE
+kselftest-%: headers FORCE
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $*
PHONY += kselftest-merge
kselftest-merge:
$(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!))
- $(Q)find $(srctree)/tools/testing/selftests -name config | \
- xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config
+ $(Q)find $(srctree)/tools/testing/selftests -name config -o -name config.$(UTS_MACHINE) | \
+ xargs $(srctree)/scripts/kconfig/merge_config.sh -y -m $(objtree)/.config
$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
# ---------------------------------------------------------------------------
ifneq ($(dtstree),)
-%.dtb: include/config/kernel.release scripts_dtc
+%.dtb: dtbs_prepare
$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
-%.dtbo: include/config/kernel.release scripts_dtc
+%.dtbo: dtbs_prepare
$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
-PHONY += dtbs dtbs_install dtbs_check
-dtbs: include/config/kernel.release scripts_dtc
- $(Q)$(MAKE) $(build)=$(dtstree)
+PHONY += dtbs dtbs_prepare dtbs_install dtbs_check
+dtbs: dtbs_prepare
+ $(Q)$(MAKE) $(build)=$(dtstree) need-dtbslist=1
+
+# include/config/kernel.release is actually needed when installing DTBs because
+# INSTALL_DTBS_PATH contains $(KERNELRELEASE). However, we do not want to make
+# dtbs_install depend on it as dtbs_install may run as root.
+dtbs_prepare: include/config/kernel.release scripts_dtc
ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
export CHECK_DTBS=y
-dtbs: dt_binding_check
+endif
+
+ifneq ($(CHECK_DTBS),)
+dtbs_prepare: dt_binding_check
endif
dtbs_check: dtbs
dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.dtbinst obj=$(dtstree)
ifdef CONFIG_OF_EARLY_FLATTREE
all: dtbs
dt_binding_check: scripts_dtc
$(Q)$(MAKE) $(build)=Documentation/devicetree/bindings
+PHONY += dt_compatible_check
+dt_compatible_check: dt_binding_check
+ $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings $@
+
# ---------------------------------------------------------------------------
# Modules
# Build modules
#
-# A module can be listed more than once in obj-m resulting in
-# duplicate lines in modules.order files. Those are removed
-# using awk while concatenating to the final file.
-
-PHONY += modules
-modules: $(if $(KBUILD_BUILTIN),vmlinux) modules_check modules_prepare
-cmd_modules_order = $(AWK) '!x[$$0]++' $(real-prereqs) > $@
-
-modules.order: $(subdir-modorder) FORCE
- $(call if_changed,modules_order)
+# *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFO_BTF_MODULES
+# is an exception.
+ifdef CONFIG_DEBUG_INFO_BTF_MODULES
+KBUILD_BUILTIN := 1
+modules: vmlinux
+endif
-targets += modules.order
+modules: modules_prepare
# Target to prepare building external modules
-PHONY += modules_prepare
modules_prepare: prepare
$(Q)$(MAKE) $(build)=scripts scripts/module.lds
-export modules_sign_only :=
-
-ifeq ($(CONFIG_MODULE_SIG),y)
-PHONY += modules_sign
-modules_sign: modules_install
- @:
-
-# modules_sign is a subset of modules_install.
-# 'make modules_install modules_sign' is equivalent to 'make modules_install'.
-ifeq ($(filter modules_install,$(MAKECMDGOALS)),)
-modules_sign_only := y
-endif
-endif
-
-modinst_pre :=
-ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
-modinst_pre := __modinst_pre
-endif
-
-modules_install: $(modinst_pre)
-PHONY += __modinst_pre
-__modinst_pre:
- @rm -rf $(MODLIB)/kernel
- @rm -f $(MODLIB)/source
- @mkdir -p $(MODLIB)/kernel
- @ln -s $(abspath $(srctree)) $(MODLIB)/source
- @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
- rm -f $(MODLIB)/build ; \
- ln -s $(CURDIR) $(MODLIB)/build ; \
- fi
- @sed 's:^:kernel/:' modules.order > $(MODLIB)/modules.order
- @cp -f modules.builtin $(MODLIB)/
- @cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/
-
endif # CONFIG_MODULES
###
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
-CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \
+CLEAN_FILES += vmlinux.symvers modules-only.symvers \
modules.builtin modules.builtin.modinfo modules.nsdeps \
- compile_commands.json .thinlto-cache
+ compile_commands.json .thinlto-cache rust/test \
+ rust-project.json .vmlinux.objs .vmlinux.export.c
# Directories & files removed with 'make mrproper'
MRPROPER_FILES += include/config include/generated \
- arch/$(SRCARCH)/include/generated .tmp_objdiff \
+ arch/$(SRCARCH)/include/generated .objdiff \
debian snap tar-install \
.config .config.old .version \
Module.symvers \
- certs/signing_key.pem certs/signing_key.x509 \
+ certs/signing_key.pem \
certs/x509.genkey \
vmlinux-gdb.py \
- *.spec
+ rpmbuild \
+ rust/libmacros.so
# clean - Delete most, but leave enough to build external modules
#
mrproper: clean $(mrproper-dirs)
$(call cmd,rmfiles)
+ @find . $(RCS_FIND_IGNORE) \
+ \( -name '*.rmeta' \) \
+ -type f -print | xargs rm -f
# distclean
#
@echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
- @echo 'Configuration targets:'
@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
@echo ''
@echo 'Other generic targets:'
@echo '* vmlinux - Build the bare kernel'
@echo '* modules - Build all modules'
@echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+ @echo ' vdso_install - Install unstripped vdso to INSTALL_MOD_PATH (default: /)'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ll - Build the LLVM assembly file'
echo ' (default: $(INSTALL_HDR_PATH))'; \
echo ''
@echo 'Static analysers:'
- @echo ' checkstack - Generate a list of stack hogs'
+ @echo ' checkstack - Generate a list of stack hogs and consider all functions'
+ @echo ' with a stack size larger than MINSTACKSIZE (default: 100)'
@echo ' versioncheck - Sanity check on version.h usage'
@echo ' includecheck - Check for duplicate included header files'
@echo ' export_report - List the usages of all exported symbols'
@echo ' kselftest-merge - Merge all the config dependencies of'
@echo ' kselftest to existing .config.'
@echo ''
+ @echo 'Rust targets:'
+ @echo ' rustavailable - Checks whether the Rust toolchain is'
+ @echo ' available and, if not, explains why.'
+ @echo ' rustfmt - Reformat all the Rust code in the kernel'
+ @echo ' rustfmtcheck - Checks if all the Rust code in the kernel'
+ @echo ' is formatted, printing a diff otherwise.'
+ @echo ' rustdoc - Generate Rust documentation'
+ @echo ' (requires kernel .config)'
+ @echo ' rusttest - Runs the Rust tests'
+ @echo ' (requires kernel .config; downloads external repos)'
+ @echo ' rust-analyzer - Generate rust-project.json rust-analyzer support file'
+ @echo ' (requires kernel .config)'
+ @echo ' dir/file.[os] - Build specified target only'
+ @echo ' dir/file.rsi - Build macro expanded source, similar to C preprocessing.'
+ @echo ' Run with RUSTFMT=n to skip reformatting if needed.'
+ @echo ' The output is not intended to be compilable.'
+ @echo ' dir/file.ll - Build the LLVM assembly file'
+ @echo ''
@$(if $(dtstree), \
echo 'Devicetree:'; \
echo '* dtbs - Build device tree blobs for enabled boards'; \
@echo 'Documentation targets:'
@$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
@echo ''
- @echo 'Architecture specific targets ($(SRCARCH)):'
- @$(if $(archhelp),$(archhelp),\
- echo ' No architecture specific help defined for $(SRCARCH)')
+ @echo 'Architecture-specific targets ($(SRCARCH)):'
+ @$(or $(archhelp),\
+ echo ' No architecture-specific help defined for $(SRCARCH)')
@echo ''
@$(if $(boards), \
$(foreach b, $(boards), \
printf " %-16s - Show all of the above\\n" help-boards; \
echo '')
- @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
- @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
+ @echo ' make V=n [targets] 1: verbose build'
+ @echo ' 2: give reason for rebuild of target'
+ @echo ' V=1 and V=2 can be combined with V=12'
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
@echo ' make C=1 [targets] Check re-compiled c source with $$CHECK'
@echo ' (sparse by default)'
@echo ' make C=2 [targets] Force check of all c source with $$CHECK'
@echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
- @echo ' make W=n [targets] Enable extra build checks, n=1,2,3 where'
+ @echo ' make W=n [targets] Enable extra build checks, n=1,2,3,c,e where'
@echo ' 1: warnings which may be relevant and do not occur too often'
@echo ' 2: warnings which occur quite often but may still be relevant'
@echo ' 3: more obscure warnings, can most likely be ignored'
+ @echo ' c: extra checks in the configuration stage (Kconfig)'
+ @echo ' e: warnings are being treated as errors'
@echo ' Multiple levels can be combined with W=12 or W=123'
+ @$(if $(dtstree), \
+ echo ' make CHECK_DTBS=1 [targets] Check all generated dtb files against schema'; \
+ echo ' This can be applied both to "dtbs" and to individual "foo.dtb" targets' ; \
+ )
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
$(help-board-dirs): help-%:
- @echo 'Architecture specific targets ($(SRCARCH) $*):'
+ @echo 'Architecture-specific targets ($(SRCARCH) $*):'
@$(if $(boards-per-dir), \
$(foreach b, $(boards-per-dir), \
printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
# Documentation targets
# ---------------------------------------------------------------------------
DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
- linkcheckdocs dochelp refcheckdocs
+ linkcheckdocs dochelp refcheckdocs texinfodocs infodocs
PHONY += $(DOC_TARGETS)
$(DOC_TARGETS):
$(Q)$(MAKE) $(build)=Documentation $@
+
+# Rust targets
+# ---------------------------------------------------------------------------
+
+# "Is Rust available?" target
+PHONY += rustavailable
+rustavailable:
+ +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!"
+
+# Documentation target
+#
+# Using the singular to avoid running afoul of `no-dot-config-targets`.
+PHONY += rustdoc
+rustdoc: prepare
+ $(Q)$(MAKE) $(build)=rust $@
+
+# Testing target
+PHONY += rusttest
+rusttest: prepare
+ $(Q)$(MAKE) $(build)=rust $@
+
+# Formatting targets
+PHONY += rustfmt rustfmtcheck
+
+# We skip `rust/alloc` since we want to minimize the diff w.r.t. upstream.
+#
+# We match using absolute paths since `find` does not resolve them
+# when matching, which is a problem when e.g. `srctree` is `..`.
+# We `grep` afterwards in order to remove the directory entry itself.
+rustfmt:
+ $(Q)find $(abs_srctree) -type f -name '*.rs' \
+ -o -path $(abs_srctree)/rust/alloc -prune \
+ -o -path $(abs_objtree)/rust/test -prune \
+ | grep -Fv $(abs_srctree)/rust/alloc \
+ | grep -Fv $(abs_objtree)/rust/test \
+ | grep -Fv generated \
+ | xargs $(RUSTFMT) $(rustfmt_flags)
+
+rustfmtcheck: rustfmt_flags = --check
+rustfmtcheck: rustfmt
+
# Misc
# ---------------------------------------------------------------------------
+PHONY += misc-check
+misc-check:
+ $(Q)$(srctree)/scripts/misc-check
+
+all: misc-check
+
PHONY += scripts_gdb
scripts_gdb: prepare0
$(Q)$(MAKE) $(build)=scripts/gdb
else # KBUILD_EXTMOD
+filechk_kernel.release = echo $(KERNELRELEASE)
+
###
# External module support.
# When building external modules the kernel used as basis is considered
KBUILD_BUILTIN :=
KBUILD_MODULES := 1
-build-dirs := $(KBUILD_EXTMOD)
-$(MODORDER): descend
- @:
+build-dir := $(KBUILD_EXTMOD)
compile_commands.json: $(extmod_prefix)compile_commands.json
PHONY += compile_commands.json
# now expand this into a simple variable to reduce the cost of shell evaluations
prepare: CC_VERSION_TEXT := $(CC_VERSION_TEXT)
prepare:
- @if [ "$(CC_VERSION_TEXT)" != $(CONFIG_CC_VERSION_TEXT) ]; then \
+ @if [ "$(CC_VERSION_TEXT)" != "$(CONFIG_CC_VERSION_TEXT)" ]; then \
echo >&2 "warning: the compiler differs from the one used to build the kernel"; \
- echo >&2 " The kernel was built by: "$(CONFIG_CC_VERSION_TEXT); \
+ echo >&2 " The kernel was built by: $(CONFIG_CC_VERSION_TEXT)"; \
echo >&2 " You are using: $(CC_VERSION_TEXT)"; \
fi
@echo ' modules - default target, build the module(s)'
@echo ' modules_install - install the module'
@echo ' clean - remove generated files in module directory only'
+ @echo ' rust-analyzer - generate rust-project.json rust-analyzer support file'
@echo ''
-# no-op for external module builds
-PHONY += modules_prepare
+ifndef CONFIG_MODULES
+modules modules_install: __external_modules_error
+__external_modules_error:
+ @echo >&2 '***'
+ @echo >&2 '*** The present kernel disabled CONFIG_MODULES.'
+ @echo >&2 '*** You cannot build or install external modules.'
+ @echo >&2 '***'
+ @false
+endif
endif # KBUILD_EXTMOD
# ---------------------------------------------------------------------------
# Modules
-PHONY += modules modules_install
+PHONY += modules modules_install modules_sign modules_prepare
+
+modules_install:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst \
+ sign-only=$(if $(filter modules_install,$(MAKECMDGOALS)),,y)
+
+ifeq ($(CONFIG_MODULE_SIG),y)
+# modules_sign is a subset of modules_install.
+# 'make modules_install modules_sign' is equivalent to 'make modules_install'.
+modules_sign: modules_install
+ @:
+else
+modules_sign:
+ @echo >&2 '***'
+ @echo >&2 '*** CONFIG_MODULE_SIG is disabled. You cannot sign modules.'
+ @echo >&2 '***'
+ @false
+endif
ifdef CONFIG_MODULES
-modules: modules_check
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+$(MODORDER): $(build-dir)
+ @:
+
+# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
+# This is solely useful to speed up test compiles.
+modules: modpost
+ifneq ($(KBUILD_MODPOST_NOFINAL),1)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal
+endif
PHONY += modules_check
modules_check: $(MODORDER)
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $<
-quiet_cmd_depmod = DEPMOD $(MODLIB)
- cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
- $(KERNELRELEASE)
-
-modules_install:
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
- $(call cmd,depmod)
-
else # CONFIG_MODULES
-# Modules not configured
-# ---------------------------------------------------------------------------
+modules:
+ @:
-modules modules_install:
- @echo >&2 '***'
- @echo >&2 '*** The present kernel configuration has modules disabled.'
- @echo >&2 '*** To use the module feature, please run "make menuconfig" etc.'
- @echo >&2 '*** to enable CONFIG_MODULES.'
- @echo >&2 '***'
- @exit 1
+KBUILD_MODULES :=
endif # CONFIG_MODULES
+PHONY += modpost
+modpost: $(if $(single-build),, $(if $(KBUILD_BUILTIN), vmlinux.o)) \
+ $(if $(KBUILD_MODULES), modules_check)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
# Single targets
# ---------------------------------------------------------------------------
# To build individual files in subdirectories, you can do like this:
# .ko is special because modpost is needed
single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS)))
-single-no-ko := $(sort $(patsubst %.ko,%.mod, $(MAKECMDGOALS)))
+single-no-ko := $(filter-out $(single-ko), $(MAKECMDGOALS)) \
+ $(foreach x, o mod, $(patsubst %.ko, %.$x, $(single-ko)))
-$(single-ko): single_modpost
+$(single-ko): single_modules
@:
-$(single-no-ko): descend
+$(single-no-ko): $(build-dir)
@:
-ifeq ($(KBUILD_EXTMOD),)
-# For the single build of in-tree modules, use a temporary file to avoid
-# the situation of modules_install installing an invalid modules.order.
-MODORDER := .modules.tmp
+# Remove MODORDER when done because it is not the real one.
+PHONY += single_modules
+single_modules: $(single-no-ko) modules_prepare
+ $(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$(m:%.ko=%.o);) } > $(MODORDER)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+ifneq ($(KBUILD_MODPOST_NOFINAL),1)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal
endif
+ $(Q)rm -f $(MODORDER)
-PHONY += single_modpost
-single_modpost: $(single-no-ko) modules_prepare
- $(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$m;) } > $(MODORDER)
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+single-goals := $(addprefix $(build-dir)/, $(single-no-ko))
KBUILD_MODULES := 1
-export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod_prefix), $(single-no-ko))
-
-# trim unrelated directories
-build-dirs := $(foreach d, $(build-dirs), \
- $(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))
-
endif
-ifndef CONFIG_MODULES
-KBUILD_MODULES :=
-endif
-
-# Handle descending into subdirectories listed in $(build-dirs)
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
# Error messages still appears in the original language
-PHONY += descend $(build-dirs)
-descend: $(build-dirs)
-$(build-dirs): prepare
- $(Q)$(MAKE) $(build)=$@ \
- single-build=$(if $(filter-out $@/, $(filter $@/%, $(KBUILD_SINGLE_TARGETS))),1) \
- need-builtin=1 need-modorder=1
+PHONY += $(build-dir)
+$(build-dir): prepare
+ $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1 $(single-goals)
clean-dirs := $(addprefix _clean_, $(clean-dirs))
PHONY += $(clean-dirs) clean
clean: $(clean-dirs)
$(call cmd,rmfiles)
- @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
- \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \
+ @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+ \( -name '*.[aios]' -o -name '*.rsi' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '*.ko.*' \
- -o -name '*.dtb' -o -name '*.dtbo' -o -name '*.dtb.S' -o -name '*.dt.yaml' \
+ -o -name '*.dtb' -o -name '*.dtbo' \
+ -o -name '*.dtb.S' -o -name '*.dtbo.S' \
+ -o -name '*.dt.yaml' -o -name 'dtbs-list' \
-o -name '*.dwo' -o -name '*.lst' \
-o -name '*.su' -o -name '*.mod' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.lex.c' -o -name '*.tab.[ch]' \
-o -name '*.asn1.[ch]' \
-o -name '*.symtypes' -o -name 'modules.order' \
- -o -name '.tmp_*.o.*' \
-o -name '*.c.[012]*.*' \
-o -name '*.ll' \
-o -name '*.gcno' \
- -o -name '*.*.symversions' \) -type f -print | xargs rm -f
+ -o -name '*.*.symversions' \) -type f -print \
+ -o -name '.tmp_*' -print \
+ | xargs rm -rf
# Generate tags for editors
# ---------------------------------------------------------------------------
tags TAGS cscope gtags: FORCE
$(call cmd,tags)
+# IDE support targets
+PHONY += rust-analyzer
+rust-analyzer:
+ $(Q)$(MAKE) $(build)=rust $@
+
# Script to generate missing namespace dependencies
# ---------------------------------------------------------------------------
cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs))
$(extmod_prefix)compile_commands.json: scripts/clang-tools/gen_compile_commands.py \
- $(if $(KBUILD_EXTMOD),,$(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)) \
+ $(if $(KBUILD_EXTMOD),, vmlinux.a $(KBUILD_VMLINUX_LIBS)) \
$(if $(CONFIG_MODULES), $(MODORDER)) FORCE
$(call if_changed,gen_compile_commands)
else
CHECKSTACK_ARCH := $(ARCH)
endif
+MINSTACKSIZE ?= 100
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
- $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+ $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) $(MINSTACKSIZE)
kernelrelease:
- @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+ @$(filechk_kernel.release)
kernelversion:
@echo $(KERNELVERSION)
image_name:
@echo $(KBUILD_IMAGE)
+PHONY += run-command
+run-command:
+ $(Q)$(KBUILD_RUN_COMMAND)
+
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -rf $(rm-files)
git.samba.org / sfrench / cifs-2.6.git / blobdiff