Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
[sfrench/cifs-2.6.git] / Documentation / kernel-parameters.txt
index 789f97ac22bf086c2b9320bb9db5fb3753d7df78..8363ad3ba0187f9abc65ab75c989e80bd0e70eed 100644 (file)
@@ -34,7 +34,6 @@ parameter is applicable:
        APIC    APIC support is enabled.
        APM     Advanced Power Management support is enabled.
        AX25    Appropriate AX.25 support is enabled.
        APIC    APIC support is enabled.
        APM     Advanced Power Management support is enabled.
        AX25    Appropriate AX.25 support is enabled.
-       CD      Appropriate CD support is enabled.
        DRM     Direct Rendering Management support is enabled.
        EDD     BIOS Enhanced Disk Drive Services (EDD) is enabled
        EFI     EFI Partitioning (GPT) is enabled
        DRM     Direct Rendering Management support is enabled.
        EDD     BIOS Enhanced Disk Drive Services (EDD) is enabled
        EFI     EFI Partitioning (GPT) is enabled
@@ -319,9 +318,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
        autotest        [IA64]
 
 
        autotest        [IA64]
 
-       aztcd=          [HW,CD] Aztech CD268 CDROM driver
-                       Format: <io>,0x79 (?)
-
        baycom_epp=     [HW,AX25]
                        Format: <io>,<mode>
 
        baycom_epp=     [HW,AX25]
                        Format: <io>,<mode>
 
@@ -364,10 +360,6 @@ and is between 256 and 4096 characters. It is defined in the file
                        possible to determine what the correct size should be.
                        This option provides an override for these situations.
 
                        possible to determine what the correct size should be.
                        This option provides an override for these situations.
 
-       cdu31a=         [HW,CD]
-                       Format: <io>,<irq>[,PAS]
-                       See header of drivers/cdrom/cdu31a.c.
-
        chandev=        [HW,NET] Generic channel device initialisation
 
        checkreqprot    [SELINUX] Set initial checkreqprot flag value.
        chandev=        [HW,NET] Generic channel device initialisation
 
        checkreqprot    [SELINUX] Set initial checkreqprot flag value.
@@ -421,9 +413,6 @@ and is between 256 and 4096 characters. It is defined in the file
        hpet=           [IA-32,HPET] option to disable HPET and use PIT.
                        Format: disable
 
        hpet=           [IA-32,HPET] option to disable HPET and use PIT.
                        Format: disable
 
-       cm206=          [HW,CD]
-                       Format: { auto | [<io>,][<irq>] }
-
        com20020=       [HW,NET] ARCnet - COM20020 chipset
                        Format:
                        <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
        com20020=       [HW,NET] ARCnet - COM20020 chipset
                        Format:
                        <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
@@ -660,9 +649,6 @@ and is between 256 and 4096 characters. It is defined in the file
        gpt             [EFI] Forces disk with valid GPT signature but
                        invalid Protective MBR to be treated as GPT.
 
        gpt             [EFI] Forces disk with valid GPT signature but
                        invalid Protective MBR to be treated as GPT.
 
-       gscd=           [HW,CD]
-                       Format: <io>
-
        gvp11=          [HW,SCSI]
 
        hashdist=       [KNL,NUMA] Large hashes allocated during boot
        gvp11=          [HW,SCSI]
 
        hashdist=       [KNL,NUMA] Large hashes allocated during boot
@@ -826,9 +812,6 @@ and is between 256 and 4096 characters. It is defined in the file
                        tasks in the system -- can cause problems and
                        suboptimal load balancer performance.
 
                        tasks in the system -- can cause problems and
                        suboptimal load balancer performance.
 
-       isp16=          [HW,CD]
-                       Format: <io>,<irq>,<dma>,<setup>
-
        iucv=           [HW,NET]
 
        js=             [HW,JOY] Analog joystick
        iucv=           [HW,NET]
 
        js=             [HW,JOY] Analog joystick
@@ -967,11 +950,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
        mcatest=        [IA-64]
 
 
        mcatest=        [IA-64]
 
-       mcd=            [HW,CD]
-                       Format: <port>,<irq>,<mitsumi_bug_93_wait>
-
-       mcdx=           [HW,CD]
-
        mce             [IA-32] Machine Check Exception
 
        md=             [HW] RAID subsystems devices and level
        mce             [IA-32] Machine Check Exception
 
        md=             [HW] RAID subsystems devices and level
@@ -1204,9 +1182,6 @@ and is between 256 and 4096 characters. It is defined in the file
        oprofile.timer= [HW]
                        Use timer interrupt instead of performance counters
 
        oprofile.timer= [HW]
                        Use timer interrupt instead of performance counters
 
-       optcd=          [HW,CD]
-                       Format: <io>
-
        osst=           [HW,SCSI] SCSI Tape Driver
                        Format: <buffer_size>,<write_threshold>
                        See also Documentation/scsi/st.txt.
        osst=           [HW,SCSI] SCSI Tape Driver
                        Format: <buffer_size>,<write_threshold>
                        See also Documentation/scsi/st.txt.
@@ -1522,11 +1497,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
        sbni=           [NET] Granch SBNI12 leased line adapter
 
 
        sbni=           [NET] Granch SBNI12 leased line adapter
 
-       sbpcd=          [HW,CD] Soundblaster CD adapter
-                       Format: <io>,<type>
-                       See a comment before function sbpcd_setup() in
-                       drivers/cdrom/sbpcd.c.
-
        sc1200wdt=      [HW,WDT] SC1200 WDT (watchdog) driver
                        Format: <io>[,<timeout>[,<isapnp>]]
 
        sc1200wdt=      [HW,WDT] SC1200 WDT (watchdog) driver
                        Format: <io>[,<timeout>[,<isapnp>]]
 
@@ -1579,10 +1549,6 @@ and is between 256 and 4096 characters. It is defined in the file
        simeth=         [IA-64]
        simscsi=
 
        simeth=         [IA-64]
        simscsi=
 
-       sjcd=           [HW,CD]
-                       Format: <io>,<irq>,<dma>
-                       See header of drivers/cdrom/sjcd.c.
-
        slram=          [HW,MTD]
 
        slub_debug[=options[,slabs]]    [MM, SLUB]
        slram=          [HW,MTD]
 
        slub_debug[=options[,slabs]]    [MM, SLUB]
@@ -1759,9 +1725,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
        snd-ymfpci=     [HW,ALSA]
 
 
        snd-ymfpci=     [HW,ALSA]
 
-       sonycd535=      [HW,CD]
-                       Format: <io>[,<irq>]
-
        sonypi.*=       [HW] Sony Programmable I/O Control Device driver
                        See Documentation/sonypi.txt
 
        sonypi.*=       [HW] Sony Programmable I/O Control Device driver
                        See Documentation/sonypi.txt