Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux

[sfrench/cifs-2.6.git] / Documentation / devicetree / bindings / spi / snps,dw-apb-ssi.txt

diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index 2864bc6b659c9af40008f18bcf74ac5a1aabe6ac..f54c8c36395e3458edd954118f4a79fa1e247d4d 100644 (file)
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -8,9 +8,16 @@ Required properties:
 - interrupts : One interrupt, used by the controller.
 - #address-cells : <1>, as required by generic SPI binding.
 - #size-cells : <0>, also as required by generic SPI binding.
+- clocks : phandles for the clocks, see the description of clock-names below.
+   The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock
+   is optional. If a single clock is specified but no clock-name, it is the
+   "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first.
 
 Optional properties:
-- cs-gpios : Specifies the gpio pis to be used for chipselects.
+- clock-names : Contains the names of the clocks:
+    "ssi_clk", for the core clock used to generate the external SPI clock.
+    "pclk", the interface clock, required for register access.
+- cs-gpios : Specifies the gpio pins to be used for chipselects.
 - num-cs : The number of chipselects. If omitted, this will default to 4.
 - reg-io-width : The I/O register width (in bytes) implemented by this
   device.  Supported values are 2 or 4 (the default).
@@ -25,6 +32,7 @@ Example:
                interrupts = <0 154 4>;
                #address-cells = <1>;
                #size-cells = <0>;
+               clocks = <&spi_m_clk>;
                num-cs = <2>;
                cs-gpios = <&gpio0 13 0>,
                           <&gpio0 14 0>;