* "rockchip,rk3328-usb2phy"
* "rockchip,rk3366-usb2phy"
* "rockchip,rk3399-usb2phy"
+ * "rockchip,rv1108-usb2phy"
- reg : the address offset of grf for usb-phy configuration.
- #clock-cells : should be 0.
- clock-output-names : specify the 480m output clock name.
usb-phy output 480m and xin24m.
Refer to clk/clock-bindings.txt for generic clock
consumer properties.
+ - rockchip,usbgrf : phandle to the syscon managing the "usb general
+ register files". When set driver will request its
+ phandle as one companion-grf for some special SoCs
+ (e.g RV1108).
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify host or otg port,
Required properties (port (child) node):
- #phy-cells : must be 0. See ./phy-bindings.txt for details.
- interrupts : specify an interrupt for each entry in interrupt-names.
- - interrupt-names : a list which shall be the following entries:
+ - interrupt-names : a list which should be one of the following cases:
+ Regular case:
* "otg-id" : for the otg id interrupt.
* "otg-bvalid" : for the otg vbus interrupt.
* "linestate" : for the host/otg linestate interrupt.
+ Some SoCs use one interrupt with the above muxed together, so for these
+ * "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate
+ to one.
Optional properties:
- phy-supply : phandle to a regulator that provides power to VBUS.