This bridge is found in the ARM Integrator/AP (Application Platform)
-Integrator-specific notes:
+Required properties:
+- compatible: should be one of:
+ "v3,v360epc-pci"
+ "arm,integrator-ap-pci", "v3,v360epc-pci"
+- reg: should contain two register areas:
+ first the base address of the V3 host bridge controller, 64KB
+ second the configuration area register space, 16MB
+- interrupts: should contain a reference to the V3 error interrupt
+ as routed on the system.
+- bus-range: see pci.txt
+- ranges: this follows the standard PCI bindings in the IEEE Std
+ 1275-1994 (see pci.txt) with the following restriction:
+ - The non-prefetchable and prefetchable memory windows must
+ each be exactly 256MB (0x10000000) in size.
+ - The prefetchable memory window must be immediately adjacent
+ to the non-prefetcable memory window
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+ be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
+ 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
+ as pre-fetchable. Two ranges are supported by the hardware.
-- syscon: should contain a link to the syscon device node (since
+Integrator-specific required properties:
+- syscon: should contain a link to the syscon device node, since
on the Integrator, some registers in the syscon are required to
- operate the V3).
+ operate the V3 host bridge.
-V360 EPC specific notes:
+Example:
-- reg: should contain the base address of the V3 adapter.
-- interrupts: should contain a reference to the V3 error interrupt
- as routed on the system.
+pci: pciv3@62000000 {
+ compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>; /* Bus error IRQ */
+ clocks = <&pciclk>;
+ bus-range = <0x00 0xff>;
+ ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */
+ 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
+ 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+ 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+ 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+ 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+ dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+ 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+ 0x02000000 0 0x80000000 /* Core module alias memory */
+ 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <
+ /* IDSEL 9 */
+ 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+ 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+ 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+ 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+ /* IDSEL 10 */
+ 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+ 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+ 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+ 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+ /* IDSEL 11 */
+ 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+ 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+ 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+ 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+ /* IDSEL 12 */
+ 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+ 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+ 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+ 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+ >;
+};
git.samba.org / sfrench / cifs-2.6.git / blobdiff