Merge tag '9p-for-5.3' of git://github.com/martinetd/linux

[sfrench/cifs-2.6.git] / Documentation / devicetree / bindings / net / mdio.txt

diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt
index e3e1603f256c1a55ce956a403fce855e7bf58e0e..cf8a0105488e64c56ab223aa70c61f374fa33f1d 100644 (file)
--- a/Documentation/devicetree/bindings/net/mdio.txt
+++ b/Documentation/devicetree/bindings/net/mdio.txt
@@ -1,37 +1 @@
-Common MDIO bus properties.
-
-These are generic properties that can apply to any MDIO bus.
-
-Optional properties:
-- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO
-  bus.
-- reset-delay-us: RESET pulse width in microseconds.
-
-A list of child nodes, one per device on the bus is expected. These
-should follow the generic phy.txt, or a device specific binding document.
-
-The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and
-applies to all PHY devices. It must therefore be appropriately determined based
-on all PHY requirements (maximum value of all per-PHY RESET pulse widths).
-
-Example :
-This example shows these optional properties, plus other properties
-required for the TI Davinci MDIO driver.
-
-       davinci_mdio: ethernet@5c030000 {
-               compatible = "ti,davinci_mdio";
-               reg = <0x5c030000 0x1000>;
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-               reset-delay-us = <2>;
-
-               ethphy0: ethernet-phy@1 {
-                       reg = <1>;
-               };
-
-               ethphy1: ethernet-phy@3 {
-                       reg = <3>;
-               };
-       };
+This file has moved to mdio.yaml.