Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyper...

[sfrench/cifs-2.6.git] / Documentation / devicetree / bindings / display / panel / simple-panel.txt

diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
index b2b872c710f24d69996eb3cb4922ba8dd3915a14..e11208fb7da8d0ccb4d38a41c411a20f98fe4137 100644 (file)
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
@@ -1,28 +1 @@
-Simple display panel
-====================
-
-panel node
-----------
-
-Required properties:
-- power-supply: See panel-common.txt
-
-Optional properties:
-- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- no-hpd: This panel is supposed to communicate that it's ready via HPD
-  (hot plug detect) signal, but the signal isn't hooked up so we should
-  hardcode the max delay from the panel spec when powering up the panel.
-
-Example:
-
-       panel: panel {
-               compatible = "cptt,claa101wb01";
-               ddc-i2c-bus = <&panelddc>;
-
-               power-supply = <&vdd_pnl_reg>;
-               enable-gpios = <&gpio 90 0>;
-
-               backlight = <&backlight>;
-       };
+See panel-common.yaml in this directory.