This binding uses the i.MX common pinctrl binding[3].
Required properties:
-- compatible: Should be "fsl,imx8qxp-iomuxc".
+- compatible: Should be one of:
+ "fsl,imx8qm-iomuxc",
+ "fsl,imx8qxp-iomuxc".
Required properties for Pinctrl sub nodes:
- fsl,pins: Each entry consists of 3 integers which represents
the mux and config setting for one pin. The first 2
integers <pin_id mux_mode> are specified using a
PIN_FUNC_ID macro, which can be found in
+ <dt-bindings/pinctrl/pads-imx8qm.h>,
<dt-bindings/pinctrl/pads-imx8qxp.h>.
The last integer CONFIG is the pad setting value like
pull-up on this pin.
[2] Documentation/devicetree/bindings/power/power_domain.txt
[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+RTC bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible: should be "fsl,imx8qxp-sc-rtc";
+
Example (imx8qxp):
-------------
lsio_mu1: mailbox@5d1c0000 {
compatible = "fsl,imx8qxp-scu-pd";
#power-domain-cells = <1>;
};
+
+ rtc: rtc {
+ compatible = "fsl,imx8qxp-sc-rtc";
+ };
};
};