What: /sys/class/ata_...
-Date: August 2008
-Contact: Gwendal Grignou<gwendal@google.com>
Description:
-
-Provide a place in sysfs for storing the ATA topology of the system. This allows
-retrieving various information about ATA objects.
+ Provide a place in sysfs for storing the ATA topology of the
+ system. This allows retrieving various information about ATA
+ objects.
Files under /sys/class/ata_port
-------------------------------
- For each port, a directory ataX is created where X is the ata_port_id of
- the port. The device parent is the ata host device.
+For each port, a directory ataX is created where X is the ata_port_id of the
+port. The device parent is the ata host device.
-idle_irq (read)
- Number of IRQ received by the port while idle [some ata HBA only].
+What: /sys/class/ata_port/ataX/nr_pmp_links
+What: /sys/class/ata_port/ataX/idle_irq
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is
+ connected, the number of links behind it.
-nr_pmp_links (read)
+ idle_irq: (RO) Number of IRQ received by the port while
+ idle [some ata HBA only].
- If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+What: /sys/class/ata_port/ataX/port_no
+Date: May, 2013
+KernelVersion: v3.11
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ (RO) Host local port number. While registering host controller,
+ port numbers are tracked based upon number of ports available on
+ the controller. This attribute is needed by udev for composing
+ persistent links in /dev/disk/by-path.
Files under /sys/class/ata_link
-------------------------------
- Behind each port, there is a ata_link. If there is a SATA PM in the
- topology, 15 ata_link objects are created.
-
- If a link is behind a port, the directory name is linkX, where X is
- ata_port_id of the port.
- If a link is behind a PM, its name is linkX.Y where X is ata_port_id
- of the parent port and Y the PM port.
+Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15
+ata_link objects are created.
-hw_sata_spd_limit
+If a link is behind a port, the directory name is linkX, where X is ata_port_id
+of the port. If a link is behind a PM, its name is linkX.Y where X is
+ata_port_id of the parent port and Y the PM port.
- Maximum speed supported by the connected SATA device.
-sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/sata_spd
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ hw_sata_spd_limit: (RO) Maximum speed supported by the
+ connected SATA device.
- Maximum speed imposed by libata.
+ sata_spd_limit: (RO) Maximum speed imposed by libata.
-sata_spd
+ sata_spd: (RO) Current speed of the link
+ eg. 1.5, 3 Gbps etc.
- Current speed of the link [1.5, 3Gps,...].
Files under /sys/class/ata_device
---------------------------------
- Behind each link, up to two ata device are created.
- The name of the directory is devX[.Y].Z where:
- - X is ata_port_id of the port where the device is connected,
- - Y the port of the PM if any, and
- - Z the device id: for PATA, there is usually 2 devices [0,1],
- only 1 for SATA.
-
-class
- Device class. Can be "ata" for disk, "atapi" for packet device,
- "pmp" for PM, or "none" if no device was found behind the link.
-
-dma_mode
+Behind each link, up to two ata devices are created.
+The name of the directory is devX[.Y].Z where:
+- X is ata_port_id of the port where the device is connected,
+- Y the port of the PM if any, and
+- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA.
+
+
+What: /sys/class/ata_device/devX[.Y].Z/spdn_cnt
+What: /sys/class/ata_device/devX[.Y].Z/gscr
+What: /sys/class/ata_device/devX[.Y].Z/ering
+What: /sys/class/ata_device/devX[.Y].Z/id
+What: /sys/class/ata_device/devX[.Y].Z/pio_mode
+What: /sys/class/ata_device/devX[.Y].Z/xfer_mode
+What: /sys/class/ata_device/devX[.Y].Z/dma_mode
+What: /sys/class/ata_device/devX[.Y].Z/class
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ spdn_cnt: (RO) Number of times libata decided to lower the
+ speed of link due to errors.
- Transfer modes supported by the device when in DMA mode.
- Mostly used by PATA device.
+ gscr: (RO) Cached result of the dump of PM GSCR
+ register. Valid registers are:
-pio_mode
+ 0: SATA_PMP_GSCR_PROD_ID,
+ 1: SATA_PMP_GSCR_REV,
+ 2: SATA_PMP_GSCR_PORT_INFO,
+ 32: SATA_PMP_GSCR_ERROR,
+ 33: SATA_PMP_GSCR_ERROR_EN,
+ 64: SATA_PMP_GSCR_FEAT,
+ 96: SATA_PMP_GSCR_FEAT_EN,
+ 130: SATA_PMP_GSCR_SII_GPIO
- Transfer modes supported by the device when in PIO mode.
- Mostly used by PATA device.
+ Only valid if the device is a PM.
-xfer_mode
+ ering: (RO) Formatted output of the error ring of the
+ device.
- Current transfer mode.
+ id: (RO) Cached result of IDENTIFY command, as
+ described in ATA8 7.16 and 7.17. Only valid if
+ the device is not a PM.
-id
+ pio_mode: (RO) Transfer modes supported by the device when
+ in PIO mode. Mostly used by PATA device.
- Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
- Only valid if the device is not a PM.
+ xfer_mode: (RO) Current transfer mode
-gscr
+ dma_mode: (RO) Transfer modes supported by the device when
+ in DMA mode. Mostly used by PATA device.
- Cached result of the dump of PM GSCR register.
- Valid registers are:
- 0: SATA_PMP_GSCR_PROD_ID,
- 1: SATA_PMP_GSCR_REV,
- 2: SATA_PMP_GSCR_PORT_INFO,
- 32: SATA_PMP_GSCR_ERROR,
- 33: SATA_PMP_GSCR_ERROR_EN,
- 64: SATA_PMP_GSCR_FEAT,
- 96: SATA_PMP_GSCR_FEAT_EN,
- 130: SATA_PMP_GSCR_SII_GPIO
- Only valid if the device is a PM.
+ class: (RO) Device class. Can be "ata" for disk,
+ "atapi" for packet device, "pmp" for PM, or
+ "none" if no device was found behind the link.
-trim
- Shows the DSM TRIM mode currently used by the device. Valid
- values are:
- unsupported: Drive does not support DSM TRIM
- unqueued: Drive supports unqueued DSM TRIM only
- queued: Drive supports queued DSM TRIM
- forced_unqueued: Drive's queued DSM support is known to be
- buggy and only unqueued TRIM commands
- are sent
+What: /sys/class/ata_device/devX[.Y].Z/trim
+Date: May, 2015
+KernelVersion: v4.10
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ (RO) Shows the DSM TRIM mode currently used by the device. Valid
+ values are:
-spdn_cnt
+ unsupported: Drive does not support DSM TRIM
- Number of time libata decided to lower the speed of link due to errors.
+ unqueued: Drive supports unqueued DSM TRIM only
-ering
+ queued: Drive supports queued DSM TRIM
- Formatted output of the error ring of the device.
+ forced_unqueued: Drive's queued DSM support is known to
+ be buggy and only unqueued TRIM commands
+ are sent
git.samba.org / sfrench / cifs-2.6.git / blobdiff