# # Input misc drivers configuration # menuconfig INPUT_MISC bool "Miscellaneous devices" help Say Y here, and a list of miscellaneous input drivers will be displayed. Everything that didn't fit into the other categories is here. This option doesn't affect the kernel. If unsure, say Y. if INPUT_MISC config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM help Say Y here if you want the standard PC Speaker to be used for bells and whistles. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called pcspkr. config INPUT_SPARCSPKR tristate "SPARC Speaker support" depends on PCI && SPARC64 help Say Y here if you want the standard Speaker on Sparc PCI systems to be used for bells and whistles. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called sparcspkr. config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K config INPUT_APANEL tristate "Fujitsu Lifebook Application Panel buttons" depends on X86 && I2C && LEDS_CLASS select INPUT_POLLDEV select CHECK_SIGNATURE help Say Y here for support of the Application Panel buttons, used on Fujitsu Lifebook. These are attached to the mainboard through an SMBus interface managed by the I2C Intel ICH (i801) driver, which you should also build for this kernel. To compile this driver as a module, choose M here: the module will be called apanel. config INPUT_IXP4XX_BEEPER tristate "IXP4XX Beeper support" depends on ARCH_IXP4XX help If you say yes here, you can connect a beeper to the ixp4xx gpio pins. This is used by the LinkSys NSLU2. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called ixp4xx-beeper. config INPUT_COBALT_BTNS tristate "Cobalt button interface" depends on MIPS_COBALT select INPUT_POLLDEV help Say Y here if you want to support MIPS Cobalt button interface. To compile this driver as a module, choose M here: the module will be called cobalt_btns. config INPUT_WISTRON_BTNS tristate "x86 Wistron laptop button interface" depends on X86 && !X86_64 select INPUT_POLLDEV select NEW_LEDS select LEDS_CLASS select CHECK_SIGNATURE help Say Y here for support of Wistron laptop button interfaces, used on laptops of various brands, including Acer and Fujitsu-Siemens. If available, mail and wifi LEDs will be controllable via /sys/class/leds. To compile this driver as a module, choose M here: the module will be called wistron_btns. config INPUT_ATLAS_BTNS tristate "x86 Atlas button interface" depends on X86 && ACPI help Say Y here for support of Atlas wallmount touchscreen buttons. The events will show up as scancodes F1 through F9 via evdev. To compile this driver as a module, choose M here: the module will be called atlas_btns. config INPUT_ATI_REMOTE tristate "ATI / X10 USB RF remote control" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use an ATI or X10 "Lola" USB remote control. These are RF remotes with USB receivers. The ATI remote comes with many of ATI's All-In-Wonder video cards. The X10 "Lola" remote is available at: This driver provides mouse pointer, left and right mouse buttons, and maps all the other remote buttons to keypress events. To compile this driver as a module, choose M here: the module will be called ati_remote. config INPUT_ATI_REMOTE2 tristate "ATI / Philips USB RF remote control" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use an ATI or Philips USB RF remote control. These are RF remotes with USB receivers. ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards and is also available as a separate product. This driver provides mouse pointer, left and right mouse buttons, and maps all the other remote buttons to keypress events. To compile this driver as a module, choose M here: the module will be called ati_remote2. config INPUT_KEYSPAN_REMOTE tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" depends on EXPERIMENTAL depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use a Keyspan DMR USB remote control. Currently only the UIA-11 type of receiver has been tested. The tag on the receiver that connects to the USB port should have a P/N that will tell you what type of DMR you have. The UIA-10 type is not supported at this time. This driver maps all buttons to keypress events. To compile this driver as a module, choose M here: the module will be called keyspan_remote. config INPUT_POWERMATE tristate "Griffin PowerMate and Contour Jog support" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use Griffin PowerMate or Contour Jog devices. These are aluminum dials which can measure clockwise and anticlockwise rotation. The dial also acts as a pushbutton. The base contains an LED which can be instructed to pulse or to switch to a particular intensity. You can download userspace tools from . To compile this driver as a module, choose M here: the module will be called powermate. config INPUT_YEALINK tristate "Yealink usb-p1k voip phone" depends on EXPERIMENTAL depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to enable keyboard and LCD functions of the Yealink usb-p1k usb phones. The audio part is enabled by the generic usb sound driver, so you might want to enable that as well. For information about how to use these additional functions, see . To compile this driver as a module, choose M here: the module will be called yealink. config INPUT_CM109 tristate "C-Media CM109 USB I/O Controller" depends on EXPERIMENTAL depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to enable keyboard and buzzer functions of the C-Media CM109 usb phones. The audio part is enabled by the generic usb sound driver, so you might want to enable that as well. To compile this driver as a module, choose M here: the module will be called cm109. config INPUT_UINPUT tristate "User level driver support" help Say Y here if you want to support user level drivers for input subsystem accessible under char device 10:223 - /dev/input/uinput. To compile this driver as a module, choose M here: the module will be called uinput. config INPUT_SGI_BTNS tristate "SGI Indy/O2 volume button interface" depends on SGI_IP22 || SGI_IP32 select INPUT_POLLDEV help Say Y here if you want to support SGI Indy/O2 volume button interface. To compile this driver as a module, choose M here: the module will be called sgi_btns. config HP_SDC_RTC tristate "HP SDC Real Time Clock" depends on (GSC || HP300) && SERIO select HP_SDC help Say Y here if you want to support the built-in real time clock of the HP SDC controller. config INPUT_PCF50633_PMU tristate "PCF50633 PMU events" depends on MFD_PCF50633 help Say Y to include support for delivering PMU events via input layer on NXP PCF50633. config INPUT_GPIO_ROTARY_ENCODER tristate "Rotary encoders connected to GPIO pins" depends on GPIOLIB && GENERIC_GPIO help Say Y here to add support for rotary encoders connected to GPIO lines. Check file:Documentation/incput/rotary_encoder.txt for more information. To compile this driver as a module, choose M here: the module will be called rotary_encoder. config INPUT_RB532_BUTTON tristate "Mikrotik Routerboard 532 button interface" depends on MIKROTIK_RB532 depends on GPIOLIB && GENERIC_GPIO select INPUT_POLLDEV help Say Y here if you want support for the S1 button built into Mikrotik's Routerboard 532. To compile this driver as a module, choose M here: the module will be called rb532_button. endif