# # Hardware monitoring chip drivers configuration # menuconfig HWMON tristate "Hardware Monitoring support" depends on HAS_IOMEM default y help Hardware monitoring devices let you monitor the hardware health of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to control the speed of the fans. If you want this support you should say Y here and also to the specific driver(s) for your sensors chip(s) below. To find out which specific driver(s) you need, use the sensors-detect script from the lm_sensors package. Read for details. This support can also be built as a module. If so, the module will be called hwmon. if HWMON config HWMON_VID tristate default n config HWMON_DEBUG_CHIP bool "Hardware Monitoring Chip debugging messages" default n help Say Y here if you want the I2C chip drivers to produce a bunch of debug messages to the system log. Select this if you are having a problem with I2C support and want to see more of what is going on. comment "Native drivers" config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" depends on X86 && EXPERIMENTAL help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency control parts of the Abit uGuru are not supported. The Abit uGuru chip can be found on Abit uGuru featuring motherboards (most modern Abit motherboards from before end 2005). For more info and a list of which motherboards have which revision see Documentation/hwmon/abituguru This driver can also be built as a module. If so, the module will be called abituguru. config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" depends on X86 && EXPERIMENTAL help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors and their settings is supported. The third revision of the Abit uGuru chip can be found on recent Abit motherboards (since end 2005). For more info and a list of which motherboards have which revision see Documentation/hwmon/abituguru3 This driver can also be built as a module. If so, the module will be called abituguru3. config SENSORS_AD7414 tristate "Analog Devices AD7414" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Analog Devices AD7414 temperature monitoring chip. This driver can also be built as a module. If so, the module will be called ad7414. config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Analog Devices AD7416, AD7417 and AD7418 temperature monitoring chips. This driver can also be built as a module. If so, the module will be called ad7418. config SENSORS_ADCXX tristate "National Semiconductor ADCxxxSxxx" depends on SPI_MASTER && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor ADCS chip family, where * bb is the resolution in number of bits (8, 10, 12) * c is the number of channels (1, 2, 4, 8) * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS and 101 for 1 MSPS) Examples : ADC081S101, ADC124S501, ... This driver can also be built as a module. If so, the module will be called adcxx. config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, and the XEON processor built-in sensor. This driver can also be built as a module. If so, the module will be called adm1021. config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM1025 and Philips NE1619 sensor chips. This driver can also be built as a module. If so, the module will be called adm1025. config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 sensor chip. This driver can also be built as a module. If so, the module will be called adm1026. config SENSORS_ADM1029 tristate "Analog Devices ADM1029" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Analog Devices ADM1029 sensor chip. Very rare chip, please let us know you use it. This driver can also be built as a module. If so, the module will be called adm1029. config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. This driver can also be built as a module. If so, the module will be called adm1031. config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. This driver can also be built as a module. If so, the module will be called adm9240. config SENSORS_ADT7411 tristate "Analog Devices ADT7411" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Analog Devices ADT7411 voltage and temperature monitoring chip. This driver can also be built as a module. If so, the module will be called adt7411. config SENSORS_ADT7462 tristate "Analog Devices ADT7462" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Analog Devices ADT7462 temperature monitoring chips. This driver can also be built as a module. If so, the module will be called adt7462. config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Analog Devices ADT7470 temperature monitoring chips. This driver can also be built as a module. If so, the module will be called adt7470. config SENSORS_ADT7475 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring chips. This driver can also be build as a module. If so, the module will be called adt7475. config SENSORS_ASC7621 tristate "Andigilog aSC7621" depends on HWMON && I2C help If you say yes here you get support for the aSC7621 family of SMBus sensors chip found on most Intel X38, X48, X58, 945, 965 and 975 desktop boards. Currently supported chips: aSC7621 aSC7621a This driver can also be built as a module. If so, the module will be called asc7621. config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on X86 && PCI && EXPERIMENTAL help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported is whole AMD K8 microarchitecture. Please note that you will need at least lm-sensors 2.10.1 for proper userspace support. This driver can also be built as a module. If so, the module will be called k8temp. config SENSORS_K10TEMP tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" depends on X86 && PCI help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of the AMD Family 10h and all revisions of the AMD Family 11h microarchitectures. This driver can also be built as a module. If so, the module will be called k10temp. config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL select INPUT_POLLDEV help Support for the motion sensor included in PowerBooks. Includes implementations for PMU and I2C. This driver can also be built as a module. If so, the module will be called ams. config SENSORS_AMS_PMU bool "PMU variant" depends on SENSORS_AMS && ADB_PMU default y help PMU variant of motion sensor, found in late 2005 PowerBooks. config SENSORS_AMS_I2C bool "I2C variant" depends on SENSORS_AMS && I2C default y help I2C variant of motion sensor, found in early 2005 PowerBooks and iBooks. config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor chip found on some Asus mainboards. This driver can also be built as a module. If so, the module will be called asb100. config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID controller. If your board have such a chip, you are able to control your CPU core and other voltages. This driver can also be built as a module. If so, the module will be called atxp1. config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" depends on I2C help If you say yes here you get support for Dallas Semiconductor DS1621 and DS1625 sensor chips. This driver can also be built as a module. If so, the module will be called ds1621. config SENSORS_I5K_AMB tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" depends on PCI && EXPERIMENTAL help If you say yes here you get support for FB-DIMM AMB temperature monitoring chips on systems with the Intel 5000 series chipset. This driver can also be built as a module. If so, the module will be called i5k_amb. config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71805f. config SENSORS_F71882FG tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, F71889FG and F8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71882fg. config SENSORS_F75375S tristate "Fintek F75375S/SP and F75373"; depends on I2C && EXPERIMENTAL help If you say yes here you get support for hardware monitoring features of the Fintek F75375S/SP and F75373 This driver can also be built as a module. If so, the module will be called f75375s. config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C help If you say yes here you get support for the following Fujitsu Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, Heimdall, Heracles, Hades and Syleus including support for the integrated watchdog. This is a merged driver for FSC sensor chips replacing the fscpos, fscscy and fscher drivers and adding support for several other FSC sensor chips. This driver can also be built as a module. If so, the module will be called fschmd. config SENSORS_G760A tristate "GMT G760A" depends on I2C help If you say yes here you get support for Global Mixed-mode Technology Inc G760A fan speed PWM controller chips. This driver can also be built as a module. If so, the module will be called g760a. config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C help If you say yes here you get support for Genesys Logic GL518SM sensor chips. This driver can also be built as a module. If so, the module will be called gl518sm. config SENSORS_GL520SM tristate "Genesys Logic GL520SM" depends on I2C select HWMON_VID help If you say yes here you get support for Genesys Logic GL520SM sensor chips. This driver can also be built as a module. If so, the module will be called gl520sm. config SENSORS_CORETEMP tristate "Intel Core/Core2/Atom temperature sensor" depends on X86 && PCI && EXPERIMENTAL help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs are supported. Check documentation/driver for details. config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI depends on IPMI_HANDLER help If you say yes here you get support for the temperature and power sensors and capping hardware in various IBM System X servers that support Active Energy Manager. This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. This driver can also be built as a module. If so, the module will be called ibmaem. config SENSORS_IBMPEX tristate "IBM PowerExecutive temperature/power sensors" select IPMI_SI depends on IPMI_HANDLER help If you say yes here you get support for the temperature and power sensors in various IBM System X servers that support PowerExecutive. So far this includes the x3350, x3550, x3650, x3655, and x3755; the x3800, x3850, and x3950 models that have PCI Express; and some of the HS2x, LS2x, and QS2x blades. This driver can also be built as a module. If so, the module will be called ibmpex. config SENSORS_IT87 tristate "ITE IT87xx and compatibles" select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the SiS960 clone. This driver can also be built as a module. If so, the module will be called it87. config SENSORS_LM63 tristate "National Semiconductor LM63 and LM64" depends on I2C help If you say yes here you get support for the National Semiconductor LM63 and LM64 remote diode digital temperature sensors with integrated fan control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) motherboard, among others. This driver can also be built as a module. If so, the module will be called lm63. config SENSORS_LM70 tristate "National Semiconductor LM70 / Texas Instruments TMP121" depends on SPI_MASTER && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor LM70 and Texas Instruments TMP121/TMP123 digital temperature sensor chips. This driver can also be built as a module. If so, the module will be called lm70. config SENSORS_LM73 tristate "National Semiconductor LM73" depends on I2C help If you say yes here you get support for National Semiconductor LM73 sensor chips. This driver can also be built as a module. If so, the module will be called lm73. config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C help If you say yes here you get support for one common type of temperature sensor chip, with models including: - Dallas Semiconductor DS75 and DS1775 - Maxim MAX6625 and MAX6626 - Microchip MCP980x - National Semiconductor LM75 - NXP's LM75A - ST Microelectronics STDS75 - TelCom (now Microchip) TCN75 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, TMP275 This driver supports driver model based binding through board specific I2C device tables. It also supports the "legacy" style of driver binding. To use that with some chips which don't replicate LM75 quirks exactly, you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. config SENSORS_LM77 tristate "National Semiconductor LM77" depends on I2C help If you say yes here you get support for National Semiconductor LM77 sensor chips. This driver can also be built as a module. If so, the module will be called lm77. config SENSORS_LM78 tristate "National Semiconductor LM78 and compatibles" depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM78, LM78-J and LM79. This driver can also be built as a module. If so, the module will be called lm78. config SENSORS_LM80 tristate "National Semiconductor LM80" depends on I2C && EXPERIMENTAL help If you say yes here you get support for National Semiconductor LM80 sensor chips. This driver can also be built as a module. If so, the module will be called lm80. config SENSORS_LM83 tristate "National Semiconductor LM83 and compatibles" depends on I2C help If you say yes here you get support for National Semiconductor LM82 and LM83 sensor chips. This driver can also be built as a module. If so, the module will be called lm83. config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. This driver can also be built as a module. If so, the module will be called lm85. config SENSORS_LM87 tristate "National Semiconductor LM87 and compatibles" depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 and Analog Devices ADM1024 sensor chips. This driver can also be built as a module. If so, the module will be called lm87. config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" depends on I2C help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG sensor chips. This driver can also be built as a module. If so, the module will be called lm90. config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" depends on I2C help If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. This driver can also be built as a module. If so, the module will be called lm92. config SENSORS_LM93 tristate "National Semiconductor LM93 and compatibles" depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM93 sensor chips. This driver can also be built as a module. If so, the module will be called lm93. config SENSORS_LTC4215 tristate "Linear Technology LTC4215" depends on I2C && EXPERIMENTAL default n help If you say yes here you get support for Linear Technology LTC4215 Hot Swap Controller I2C interface. This driver can also be built as a module. If so, the module will be called ltc4215. config SENSORS_LTC4245 tristate "Linear Technology LTC4245" depends on I2C && EXPERIMENTAL default n help If you say yes here you get support for Linear Technology LTC4245 Multiple Supply Hot Swap Controller I2C interface. This driver can also be built as a module. If so, the module will be called ltc4245. config SENSORS_LM95241 tristate "National Semiconductor LM95241 sensor chip" depends on I2C help If you say yes here you get support for LM95241 sensor chip. This driver can also be built as a module. If so, the module will be called lm95241. config SENSORS_MAX1111 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" depends on SPI_MASTER help Say y here to support Maxim's MAX1111 ADC chips. This driver can also be built as a module. If so, the module will be called max1111. config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" depends on I2C help If you say yes here you get support for MAX1619 sensor chip. This driver can also be built as a module. If so, the module will be called max1619. config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the MAX6650 / MAX6651 sensor chips. This driver can also be built as a module. If so, the module will be called max6650. config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" select HWMON_VID help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC8736x Super-I/O chips. The PC87360, PC87363 and PC87364 only have fan monitoring and control. The PC87365 and PC87366 additionally have voltage and temperature monitoring. This driver can also be built as a module. If so, the module will be called pc87360. config SENSORS_PC87427 tristate "National Semiconductor PC87427" depends on EXPERIMENTAL help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC87427 Super-I/O chip. The chip has two distinct logical devices, one for fan speed monitoring and control, and one for voltage and temperature monitoring. Only fan speed monitoring is supported right now. This driver can also be built as a module. If so, the module will be called pc87427. config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" depends on I2C default n help If you say yes here you get support for Philips PCF8591 4-channel ADC, 1-channel DAC chips. This driver can also be built as a module. If so, the module will be called pcf8591. These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GENERIC_GPIO help If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. This driver can also be built as a module. If so, the module will be called sht15. config SENSORS_S3C tristate "S3C24XX/S3C64XX Inbuilt ADC" depends on ARCH_S3C2410 help If you say yes here you get support for the on-board ADCs of the Samsung S3C24XX or S3C64XX series of SoC This driver can also be built as a module. If so, the module will be called s3c-hwmo. config SENSORS_S3C_RAW bool "Include raw channel attributes in sysfs" depends on SENSORS_S3C help Say Y here if you want to include raw copies of all the ADC channels in sysfs. config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCI help If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. This driver can also be built as a module. If so, the module will be called sis5595. config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the hardware monitoring and fan control features of the SMSC DME1737, SCH311x, SCH5027, and Asus A8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. config SENSORS_EMC1403 tristate "SMSC EMC1403 thermal sensor" depends on I2C help If you say yes here you get support for the SMSC EMC1403 temperature monitoring chip. Threshold values can be configured using sysfs. Data from the different diodes are accessible via sysfs. config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" help If you say yes here you get support for the integrated fan monitoring and control capabilities of the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997 chips. The temperature and voltage sensor features of the LPC47M15x, LPC47M192, LPC47M292 and LPC47M997 are supported by another driver, select also "SMSC LPC47M192 and compatibles" below for those. This driver can also be built as a module. If so, the module will be called smsc47m1. config SENSORS_SMSC47M192 tristate "SMSC LPC47M192 and compatibles" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the temperature and voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997 chips. The fan monitoring and control capabilities of these chips are supported by another driver, select "SMSC LPC47M10x and compatibles" above. You need both drivers if you want fan control and voltage/temperature sensor support. This driver can also be built as a module. If so, the module will be called smsc47m192. config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" depends on EXPERIMENTAL help If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. This driver can also be built as a module. If so, the module will be called smsc47b397. config SENSORS_ADS7828 tristate "Texas Instruments ADS7828" depends on I2C help If you say yes here you get support for Texas Instruments ADS7828 12-bit 8-channel ADC device. This driver can also be built as a module. If so, the module will be called ads7828. config SENSORS_ADS7871 tristate "Texas Instruments ADS7871 A/D converter" depends on SPI help If you say yes here you get support for TI ADS7871 & ADS7870 This driver can also be built as a module. If so, the module will be called ads7871. config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. This driver can also be build as a module. If so, the module will be called amc6821. config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Texas Instruments THMC50 sensor chips and clones: the Analog Devices ADM1022. This driver can also be built as a module. If so, the module will be called thmc50. config SENSORS_TMP102 tristate "Texas Instruments TMP102" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Texas Instruments TMP102 sensor chips. This driver can also be built as a module. If so, the module will be called tmp102. config SENSORS_TMP401 tristate "Texas Instruments TMP401 and compatibles" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Texas Instruments TMP401 and TMP411 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp401. config SENSORS_TMP421 tristate "Texas Instruments TMP421 and compatible" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Texas Instruments TMP421, TMP422 and TMP423 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp421. config SENSORS_VIA_CPUTEMP tristate "VIA CPU temperature sensor" depends on X86 help If you say yes here you get support for the temperature sensor inside your CPU. Supported are all known variants of the VIA C7 and Nano. config SENSORS_VIA686A tristate "VIA686A" depends on PCI help If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. This driver can also be built as a module. If so, the module will be called via686a. config SENSORS_VT1211 tristate "VIA VT1211" depends on EXPERIMENTAL select HWMON_VID help If you say yes here then you get support for hardware monitoring features of the VIA VT1211 Super-I/O chip. This driver can also be built as a module. If so, the module will be called vt1211. config SENSORS_VT8231 tristate "VIA VT8231" depends on PCI select HWMON_VID help If you say yes here then you get support for the integrated sensors in the VIA VT8231 device. This driver can also be built as a module. If so, the module will be called vt8231. config SENSORS_W83781D tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W8378x series of sensor chips: the W83781D, W83782D and W83783S, and the similar Asus AS99127F. This driver can also be built as a module. If so, the module will be called w83781d. config SENSORS_W83791D tristate "Winbond W83791D" depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W83791D chip. This driver can also be built as a module. If so, the module will be called w83791d. config SENSORS_W83792D tristate "Winbond W83792D" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83792D chip. This driver can also be built as a module. If so, the module will be called w83792d. config SENSORS_W83793 tristate "Winbond W83793" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Winbond W83793 hardware monitoring chip, including support for the integrated watchdog. This driver can also be built as a module. If so, the module will be called w83793. config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other motherboards. This driver can also be built as a module. If so, the module will be called w83l785ts. config SENSORS_W83L786NG tristate "Winbond W83L786NG, W83L786NR" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83L786NG and W83L786NR sensor chips. This driver can also be built as a module. If so, the module will be called w83l786ng. config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and W83697HF. This driver can also be built as a module. If so, the module will be called w83627hf. config SENSORS_W83627EHF tristate "Winbond W83627EHF/EHG/DHG, W83667HG" select HWMON_VID help If you say yes here you get support for the hardware monitoring functionality of the Winbond W83627EHF Super-I/O chip. This driver also supports the W83627EHG, which is the lead-free version of the W83627EHF, and the W83627DHG, which is a similar chip suited for specific Intel processors that use PECI such as the Core 2 Duo. This driver also supports the W83667HG chip. This driver can also be built as a module. If so, the module will be called w83627ehf. config SENSORS_WM831X tristate "WM831x PMICs" depends on MFD_WM831X help If you say yes here you get support for the hardware monitoring functionality of the Wolfson Microelectronics WM831x series of PMICs. This driver can also be built as a module. If so, the module will be called wm831x-hwmon. config SENSORS_WM8350 tristate "Wolfson Microelectronics WM835x" depends on MFD_WM8350 help If you say yes here you get support for the hardware monitoring features of the WM835x series of PMICs. This driver can also be built as a module. If so, the module will be called wm8350-hwmon. config SENSORS_ULTRA45 tristate "Sun Ultra45 PIC16F747" depends on SPARC64 help This driver provides support for the Ultra45 workstation environmental sensors. config SENSORS_HDAPS tristate "IBM Hard Drive Active Protection System (hdaps)" depends on INPUT && X86 select INPUT_POLLDEV default n help This driver provides support for the IBM Hard Drive Active Protection System (hdaps), which provides an accelerometer and other misc. data. ThinkPads starting with the R50, T41, and X40 are supported. The accelerometer data is readable via sysfs. This driver also provides an absolute input class device, allowing the laptop to act as a pinball machine-esque joystick. If your ThinkPad is not recognized by the driver, please update to latest BIOS. This is especially the case for some R52 ThinkPads. Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. config SENSORS_LIS3_SPI tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" depends on !ACPI && SPI_MASTER && INPUT select INPUT_POLLDEV default n help This driver provides support for the LIS3LV02Dx accelerometer connected via SPI. The accelerometer data is readable via /sys/devices/platform/lis3lv02d. This driver also provides an absolute input class device, allowing the laptop to act as a pinball machine-esque joystick. This driver can also be built as modules. If so, the core module will be called lis3lv02d and a specific module for the SPI transport is called lis3lv02d_spi. config SENSORS_LIS3_I2C tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" depends on I2C && INPUT select INPUT_POLLDEV default n help This driver provides support for the LIS3LV02Dx accelerometer connected via I2C. The accelerometer data is readable via /sys/devices/platform/lis3lv02d. This driver also provides an absolute input class device, allowing the device to act as a pinball machine-esque joystick. This driver can also be built as modules. If so, the core module will be called lis3lv02d and a specific module for the I2C transport is called lis3lv02d_i2c. config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 select NEW_LEDS select LEDS_CLASS select INPUT_POLLDEV default n help This driver provides support for the Apple System Management Controller, which provides an accelerometer (Apple Sudden Motion Sensor), light sensors, temperature sensors, keyboard backlight control and fan control. Only Intel-based Apple's computers are supported (MacBook Pro, MacBook, MacMini). Data from the different sensors, keyboard backlight control and fan control are accessible via sysfs. This driver also provides an absolute input class device, allowing the laptop to act as a pinball machine-esque joystick. Say Y here if you have an applicable laptop and want to experience the awesome power of applesmc. config SENSORS_MC13783_ADC tristate "Freescale MC13783 ADC" depends on MFD_MC13783 help Support for the A/D converter on MC13783 PMIC. if ACPI comment "ACPI drivers" config SENSORS_ATK0110 tristate "ASUS ATK0110" depends on X86 && EXPERIMENTAL help If you say yes here you get support for the ACPI hardware monitoring interface found in many ASUS motherboards. This driver will provide readings of fans, voltages and temperatures through the system firmware. This driver can also be built as a module. If so, the module will be called asus_atk0110. config SENSORS_LIS3LV02D tristate "STMicroeletronics LIS3* three-axis digital accelerometer" depends on INPUT select INPUT_POLLDEV select NEW_LEDS select LEDS_CLASS default n help This driver provides support for the LIS3* accelerometers, such as the LIS3LV02DL or the LIS331DL. In particular, it can be found in a number of HP laptops, which have the "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such systems the driver should load automatically (via ACPI alias). The accelerometer might also be found in other systems, connected via SPI or I2C. The accelerometer data is readable via /sys/devices/platform/lis3lv02d. This driver also provides an absolute input class device, allowing a laptop to act as a pinball machine-esque joystick. It provides also a misc device which can be used to detect free-fall. On HP laptops, if the led infrastructure is activated, support for a led indicating disk protection will be provided as hp::hddprotect. For more information on the feature, refer to Documentation/hwmon/lis3lv02d. This driver can also be built as modules. If so, the core module will be called lis3lv02d and a specific module for HP laptops will be called hp_accel. Say Y here if you have an applicable laptop and want to experience the awesome power of lis3lv02d. endif # ACPI endif # HWMON