if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA25X_DT bool "Support PXA25x platforms from device tree" select PINCTRL select POWER_SUPPLY select PXA25x select USE_OF help Include support for Marvell PXA25x based platforms using the device tree. Needn't select any other machine while MACH_PXA25x_DT is enabled. config MACH_PXA27X_DT bool "Support PXA27x platforms from device tree" select PINCTRL select POWER_SUPPLY select PXA27x select USE_OF help Include support for Marvell PXA27x based platforms using the device tree. Needn't select any other machine while MACH_PXA27X_DT is enabled. config MACH_PXA3XX_DT bool "Support PXA3xx platforms from device tree" select CPU_PXA300 select PINCTRL select POWER_SUPPLY select PXA3xx select USE_OF help Include support for Marvell PXA3xx based platforms using the device tree. Needn't select any other machine while MACH_PXA3XX_DT is enabled. config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" select GPIO_REG select PXA25x select SA1111 config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" select PXA27x config MACH_ZYLONITE bool select PXA3xx config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" select CPU_PXA300 select CPU_PXA310 select MACH_ZYLONITE config MACH_ZYLONITE320 bool "PXA3xx Development Platform (aka Zylonite) PXA320" select CPU_PXA320 select MACH_ZYLONITE config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select CPU_PXA300 select CPU_PXA310 select PXA3xx config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select CPU_PXA930 select CPU_PXA935 select PXA3xx select FB select FB_PXA config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select CPU_PXA930 select CPU_PXA935 select PXA3xx select FB select FB_PXA comment "Third Party Dev Platforms (sorted by vendor name)" config ARCH_PXA_IDP bool "Accelent Xscale IDP" select PXA25x config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" select ARCOM_PCMCIA select I2C_GPIO if I2C=y select ISA select PXA25x config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" select ARCOM_PCMCIA select ISA select PXA27x config MACH_BALLOON3 bool "Balloon 3 board" select IWMMXT select PXA27x config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" select IWMMXT select PXA27x help Say Y here if you intend to run this kernel on a Cogent CSB726 System On Module. config CSB726_CSB701 bool "Enable support for CSB701 baseboard" depends on MACH_CSB726 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI select IWMMXT select MIGHT_HAVE_PCI select NEED_MACH_IO_H if PCI select PXA25x select PXA27x config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x config MACH_EXEDA bool "CompuLab eXeda platform" select PXA27x config MACH_CM_X300 bool "CompuLab CM-X300 modules" select CPU_PXA300 select CPU_PXA310 select PXA3xx config MACH_CAPC7117 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" select CPU_PXA320 select PXA3xx config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" select PXA25x help Say Y here if you intend to run this kernel on Basix, Connex, ws-200ax, ws-400ax systems choice prompt "Gumstix Carrier/Expansion Board" depends on ARCH_GUMSTIX config GUMSTIX_AM200EPD bool "Enable AM200EPD board support" config GUMSTIX_AM300EPD bool "Enable AM300EPD board support" endchoice config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" select IWMMXT select PXA27x config MACH_STARGATE2 bool "Intel Stargate 2 Platform" select IWMMXT select PXA27x config MACH_XCEP bool "Iskratel Electronics XCEP" select MTD select MTD_CFI select MTD_CFI_INTELEXT select MTD_PHYSMAP select PXA25x help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. config TRIZEPS_PXA bool "PXA based Keith und Koep Trizeps DIMM-Modules" config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA select PXA27x select TRIZEPS_PCMCIA config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA select MACH_TRIZEPS4 select PXA27x select TRIZEPS_PCMCIA choice prompt "Select base board for Trizeps module" depends on TRIZEPS_PXA config MACH_TRIZEPS_CONXS bool "ConXS Eval Board" config MACH_TRIZEPS_UCONXS bool "uConXS Eval Board" config MACH_TRIZEPS_ANY bool "another Board" endchoice config ARCOM_PCMCIA bool help Generic option for Arcom Viper/Zeus PCMCIA config TRIZEPS_PCMCIA bool help Enable PCMCIA support for Trizeps modules config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select IWMMXT select PXA27x config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" depends on MACH_PCM027 choice prompt "display on pcm990" depends on MACH_PCM990_BASEBOARD config PCM990_DISPLAY_SHARP bool "sharp lq084v1dg21 stn display" config PCM990_DISPLAY_NEC bool "nec nl6448bc20_18d tft display" config PCM990_DISPLAY_NONE bool "no display" endchoice config MACH_COLIBRI bool "Toradex Colibri PXA270" select PXA27x config MACH_COLIBRI_PXA270_INCOME bool "Income s.r.o. PXA270 SBC" depends on MACH_COLIBRI select PXA27x config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select CPU_PXA300 select CPU_PXA310 select PXA3xx config MACH_COLIBRI320 bool "Toradex Colibri PXA320" select CPU_PXA320 select PXA3xx config MACH_COLIBRI_EVALBOARD bool "Toradex Colibri Evaluation Carrier Board support" depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 config MACH_VPAC270 bool "Voipac PXA270" select HAVE_PATA_PLATFORM select PXA27x help PXA270 based Single Board Computer. comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" select IWMMXT select PXA27x config MACH_H5000 bool "HP iPAQ h5000" select PXA25x config MACH_HIMALAYA bool "HTC Himalaya Support" select CPU_PXA26x config MACH_MAGICIAN bool "Enable HTC Magician Support" select IWMMXT select PXA27x config MACH_MIOA701 bool "Mitac Mio A701 Support" select IWMMXT select PXA27x help Say Y here if you intend to run this kernel on a MIO A701. Currently there is only basic support for this PDA. config PXA_EZX bool "Motorola EZX Platform" select IWMMXT select PXA27x config MACH_EZX_A780 bool "Motorola EZX A780" default y depends on PXA_EZX config MACH_EZX_E680 bool "Motorola EZX E680" default y depends on PXA_EZX config MACH_EZX_A1200 bool "Motorola EZX A1200" default y depends on PXA_EZX config MACH_EZX_A910 bool "Motorola EZX A910" default y depends on PXA_EZX config MACH_EZX_E6 bool "Motorola EZX E6" default y depends on PXA_EZX config MACH_EZX_E2 bool "Motorola EZX E2" default y depends on PXA_EZX config MACH_MP900C bool "Nec Mobilepro 900/c" select PXA25x config ARCH_PXA_PALM bool "PXA based Palm PDAs" config MACH_PALM27X bool config MACH_PALMTE2 bool "Palm Tungsten|E2" default y depends on ARCH_PXA_PALM select PXA25x help Say Y here if you intend to run this kernel on a Palm Tungsten|E2 handheld computer. config MACH_PALMTC bool "Palm Tungsten|C" default y depends on ARCH_PXA_PALM select PXA25x help Say Y here if you intend to run this kernel on a Palm Tungsten|C handheld computer. config MACH_PALMT5 bool "Palm Tungsten|T5" default y depends on ARCH_PXA_PALM select IWMMXT select MACH_PALM27X select PXA27x help Say Y here if you intend to run this kernel on a Palm Tungsten|T5 handheld computer. config MACH_PALMTX bool "Palm T|X" default y depends on ARCH_PXA_PALM select IWMMXT select MACH_PALM27X select PXA27x help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. config MACH_PALMZ72 bool "Palm Zire 72" default y depends on ARCH_PXA_PALM select IWMMXT select MACH_PALM27X select PXA27x help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. config MACH_PALMLD bool "Palm LifeDrive" default y depends on ARCH_PXA_PALM select IWMMXT select MACH_PALM27X select PXA27x help Say Y here if you intend to run this kernel on a Palm LifeDrive handheld computer. config PALM_TREO bool depends on ARCH_PXA_PALM config MACH_CENTRO bool "Palm Centro 685 (GSM)" default y depends on ARCH_PXA_PALM select IWMMXT select MACH_PALM27X select PALM_TREO select PXA27x help Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) smartphone. config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM select IWMMXT select MACH_PALM27X select PALM_TREO select PXA27x help Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. config MACH_RAUMFELD_RC bool "Raumfeld Controller" select CPU_PXA300 select POWER_SUPPLY select PXA3xx config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" select CPU_PXA300 select POWER_SUPPLY select PXA3xx config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" select CPU_PXA300 select POWER_SUPPLY select PXA3xx config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_PARAM select SHARP_SCOOP help Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. config PXA_SHARPSL_DETECT_MACH_ID bool "Detect machine ID at run-time in the decompressor" depends on PXA_SHARPSL help Say Y here if you want the zImage decompressor to detect the Zaurus machine ID at run-time. For latest kexec-based boot loader, this is not necessary. config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL select I2C select I2C_PXA select MACH_SPITZ select PXA27x select PXA_SHARP_Cxx00 config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_BORZOI bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA && NET select RFKILL help This is a simple driver that is able to control the state of built in bluetooth chip on tosa. config TOSA_USE_EXT_KEYCODES bool "Tosa keyboard: use extended keycodes" depends on MACH_TOSA default n help Say Y here to enable the tosa keyboard driver to generate extended (>= 127) keycodes. Be aware, that they can't be correctly interpreted by either console keyboard driver or by Kdrive keybd driver. Say Y only if you know, what you are doing! config MACH_ICONTROL bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" select CPU_PXA320 select PXA3xx config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select FB_W100 select FB select PXA25x config MACH_E330 bool "Toshiba e330" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e330 family PDA. config MACH_E350 bool "Toshiba e350" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e350 family PDA. config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. config MACH_E400 bool "Toshiba e400" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e400 family PDA. config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x endmenu config PXA25x bool select CPU_XSCALE help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE help Select code specific to PXA27x variants config CPU_PXA26x bool select PXA25x help Select code specific to PXA26x (codename Dalhart) config PXA3xx bool select CPU_XSC3 help Select code specific to PXA3xx variants config CPU_PXA300 bool select PXA3xx help PXA300 (codename Monahans-L) config CPU_PXA310 bool select CPU_PXA300 select PXA310_ULPI if USB_ULPI help PXA310 (codename Monahans-LV) config CPU_PXA320 bool select PXA3xx help PXA320 (codename Monahans-P) config CPU_PXA930 bool select PXA3xx help PXA930 (codename Tavor-P) config CPU_PXA935 bool select CPU_PXA930 help PXA935 (codename Tavor-P65) config PXA_SHARP_C7xx bool select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool select SHARPSL_PM help Enable common support for Sharp Cxx00 models config SHARPSL_PM bool select APM_EMULATION select SHARPSL_PM_MAX1111 config SHARPSL_PM_MAX1111 bool select HWMON select SENSORS_MAX1111 select SPI select SPI_MASTER config PXA310_ULPI bool config PXA_SYSTEMS_CPLDS tristate "Motherboard cplds" default ARCH_LUBBOCK || MACH_MAINSTONE help This driver supports the Lubbock and Mainstone multifunction chip found on the pxa25x development platform system (Lubbock) and pxa27x development platform system (Mainstone). This IO board supports the interrupts handling, ethernet controller, flash chips, etc ... endif