if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" if PXA3xx menu "Supported PXA3xx Processor Variants" config CPU_PXA300 bool "PXA300 (codename Monahans-L)" config CPU_PXA310 bool "PXA310 (codename Monahans-LV)" select CPU_PXA300 config CPU_PXA320 bool "PXA320 (codename Monahans-P)" config CPU_PXA930 bool "PXA930 (codename Tavor-P)" config CPU_PXA935 bool "PXA935 (codename Tavor-P65)" select CPU_PXA930 config CPU_PXA950 bool "PXA950 (codename Tavor-PV2)" select CPU_PXA930 endmenu endif config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" select PXA25x help Say Y here if you intend to run this kernel on Basix, Connex, ws-200ax, ws-400ax systems choice prompt "Gumstix Carrier/Expansion Board" depends on ARCH_GUMSTIX config GUMSTIX_AM200EPD bool "Enable AM200EPD board support" config GUMSTIX_AM300EPD bool "Enable AM300EPD board support" endchoice config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config MACH_STARGATE2 bool "Intel Stargate 2 Platform" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x select SA1111 select PXA_HAVE_BOARD_IRQS config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform" select PXA27x select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_MP900C bool "Nec Mobilepro 900/c" select PXA25x config MACH_BALLOON3 bool "Balloon 3 board" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config ARCH_PXA_IDP bool "Accelent Xscale IDP" select PXA25x config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP select SHARP_PARAM help Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. config SHARPSL_PM bool select APM_EMULATION config CORGI_SSP_DEPRECATED bool select PXA_SSP help This option will include corgi_ssp.c and corgi_lcd.c that corgi_ts.c and other legacy drivers (corgi_bl.c and sharpsl_pm.c) may depend on. config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO select PXA_SSP config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 select MACH_SPITZ select I2C select I2C_PXA config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_BORZOI bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x select PXA_HAVE_BOARD_IRQS config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" select PXA25x select ISA select I2C_GPIO select HAVE_PWM select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e330 family PDA. config MACH_E350 bool "Toshiba e350" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e350 family PDA. config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. config MACH_E400 bool "Toshiba e400" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e400 family PDA. config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. config TRIZEPS_PXA bool "PXA based Keith und Koep Trizeps DIMM-Modules" config MACH_H5000 bool "HP iPAQ h5000" select PXA25x config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x select PXA_SSP choice prompt "Select base board for Trizeps module" depends on TRIZEPS_PXA config MACH_TRIZEPS_CONXS bool "ConXS Eval Board" config MACH_TRIZEPS_UCONXS bool "uConXS Eval Board" config MACH_TRIZEPS_ANY bool "another Board" endchoice config TRIZEPS_PCMCIA bool help Enable PCMCIA support for Trizeps modules config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x config MACH_EXEDA bool "CompuLab eXeda platform" select PXA27x config MACH_COLIBRI bool "Toradex Colibri PXA270" select PXA27x config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx select CPU_PXA300 config MACH_COLIBRI320 bool "Toradex Colibri PXA320" select PXA3xx select CPU_PXA320 config MACH_ZYLONITE bool "PXA3xx Development Platform (aka Zylonite)" select PXA3xx select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select PXA3xx select PXA_SSP config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select PXA27x select IWMMXT select PXA25x select PXA_SSP config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 config MACH_H4700 bool "HP iPAQ hx4700" select PXA27x select IWMMXT select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_HIMALAYA bool "HTC Himalaya Support" select CPU_PXA26x select FB_W100 config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x select IWMMXT select HAVE_PWM select GPIO_SYSFS help Say Y here if you intend to run this kernel on a MIO A701. Currently there is only basic support for this PDA. config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT select PXA_SSP select PXA_HAVE_BOARD_IRQS config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM config MACH_PALMTE2 bool "Palm Tungsten|E2" default y depends on ARCH_PXA_PALM select PXA25x help Say Y here if you intend to run this kernel on a Palm Tungsten|E2 handheld computer. config MACH_PALMTC bool "Palm Tungsten|C" default y depends on ARCH_PXA_PALM select PXA25x help Say Y here if you intend to run this kernel on a Palm Tungsten|C handheld computer. config MACH_PALMT5 bool "Palm Tungsten|T5" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Palm Tungsten|T5 handheld computer. config MACH_PALMTX bool "Palm T|X" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. config MACH_PALMZ72 bool "Palm Zire 72" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. config MACH_PALMLD bool "Palm LifeDrive" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Palm LifeDrive handheld computer. config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM depends on MACH_PCM027 choice prompt "display on pcm990" depends on MACH_PCM990_BASEBOARD config PCM990_DISPLAY_SHARP bool "sharp lq084v1dg21 stn display" config PCM990_DISPLAY_NEC bool "nec nl6448bc20_18d tft display" config PCM990_DISPLAY_NONE bool "no display" endchoice config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Cogent CSB726 System On Module. config CSB726_CSB701 bool "Enable supprot for CSB701 baseboard" depends on MACH_CSB726 config PXA_EZX bool "Motorola EZX Platform" select PXA27x select IWMMXT select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_EZX_A780 bool "Motorola EZX A780" default y depends on PXA_EZX config MACH_EZX_E680 bool "Motorola EZX E680" default y depends on PXA_EZX config MACH_EZX_A1200 bool "Motorola EZX A1200" default y depends on PXA_EZX config MACH_EZX_A910 bool "Motorola EZX A910" default y depends on PXA_EZX config MACH_EZX_E6 bool "Motorola EZX E6" default y depends on PXA_EZX config MACH_EZX_E2 bool "Motorola EZX E2" default y depends on PXA_EZX config MACH_XCEP bool "Iskratel Electronics XCEP" select PXA25x select MTD select MTD_PARTITIONS select MTD_PHYSMAP select MTD_CFI_INTELEXT select MTD_CFI select MTD_CHAR select SMC91X select PXA_SSP help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. endmenu config PXA25x bool select CPU_XSCALE help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE help Select code specific to PXA27x variants config CPU_PXA26x bool select PXA25x help Select code specific to PXA26x (codename Dalhart) config PXA3xx bool select CPU_XSC3 help Select code specific to PXA3xx variants config PXA_SHARP_C7xx bool select PXA_SSP select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool select PXA_SSP select SHARPSL_PM help Enable common support for Sharp Cxx00 models config PXA_SSP tristate help Enable support for PXA2xx SSP ports config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA select RFKILL help This is a simple driver that is able to control the state of built in bluetooth chip on tosa. config PXA_HAVE_BOARD_IRQS bool config PXA_HAVE_ISA_IRQS bool endif