if ARCH_IXP4XX menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" config MACH_NSLU2 bool prompt "Linksys NSLU2" select FORCE_PCI help Say 'Y' here if you want your kernel to support Linksys's NSLU2 NAS device. For more information on this platform, see http://www.nslu2-linux.org config MACH_AVILA bool "Avila" select FORCE_PCI help Say 'Y' here if you want your kernel to support the Gateworks Avila Network Platform. For more information on this platform, see . config MACH_LOFT bool "Loft" depends on MACH_AVILA help Say 'Y' here if you want your kernel to support the Giant Shoulder Inc Loft board (a minor variation on the standard Gateworks Avila Network Platform). config ARCH_ADI_COYOTE bool "Coyote" select FORCE_PCI help Say 'Y' here if you want your kernel to support the ADI Engineering Coyote Gateway Reference Platform. For more information on this platform, see . config MACH_GATEWAY7001 bool "Gateway 7001" select FORCE_PCI help Say 'Y' here if you want your kernel to support Gateway's 7001 Access Point. For more information on this platform, see http://openwrt.org config MACH_WG302V2 bool "Netgear WG302 v2 / WAG302 v2" select FORCE_PCI help Say 'Y' here if you want your kernel to support Netgear's WG302 v2 or WAG302 v2 Access Points. For more information on this platform, see http://openwrt.org config ARCH_IXDP425 bool "IXDP425" help Say 'Y' here if you want your kernel to support Intel's IXDP425 Development Platform (Also known as Richfield). For more information on this platform, see . config MACH_IXDPG425 bool "IXDPG425" help Say 'Y' here if you want your kernel to support Intel's IXDPG425 Development Platform (Also known as Montajade). For more information on this platform, see . config MACH_IXDP465 bool "IXDP465" help Say 'Y' here if you want your kernel to support Intel's IXDP465 Development Platform (Also known as BMP). For more information on this platform, see . config MACH_GORAMO_MLR bool "GORAMO Multi Link Router" help Say 'Y' here if you want your kernel to support GORAMO MultiLink router. config MACH_KIXRP435 bool "KIXRP435" help Say 'Y' here if you want your kernel to support Intel's KIXRP435 Reference Platform. For more information on this platform, see . # # IXCDP1100 is the exact same HW as IXDP425, but with a different machine # number from the bootloader due to marketing monkeys, so we just enable it # by default if IXDP425 is enabled. # config ARCH_IXCDP1100 bool depends on ARCH_IXDP425 default y config ARCH_PRPMC1100 bool "PrPMC1100" help Say 'Y' here if you want your kernel to support the Motorola PrPCM1100 Processor Mezanine Module. For more information on this platform, see . config MACH_NAS100D bool prompt "NAS100D" select FORCE_PCI help Say 'Y' here if you want your kernel to support Iomega's NAS 100d device. For more information on this platform, see http://www.nslu2-linux.org/wiki/NAS100d/HomePage config MACH_DSMG600 bool prompt "D-Link DSM-G600 RevA" select FORCE_PCI help Say 'Y' here if you want your kernel to support D-Link's DSM-G600 RevA device. For more information on this platform, see http://www.nslu2-linux.org/wiki/DSMG600/HomePage config ARCH_IXDP4XX bool depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 default y config MACH_FSG bool prompt "Freecom FSG-3" select FORCE_PCI help Say 'Y' here if you want your kernel to support Freecom's FSG-3 device. For more information on this platform, see http://www.nslu2-linux.org/wiki/FSG3/HomePage config MACH_ARCOM_VULCAN bool prompt "Arcom/Eurotech Vulcan" select FORCE_PCI help Say 'Y' here if you want your kernel to support Arcom's Vulcan board. # # Certain registers and IRQs are only enabled if supporting IXP465 CPUs # config CPU_IXP46X bool depends on MACH_IXDP465 default y config CPU_IXP43X bool depends on MACH_KIXRP435 default y config MACH_GTWX5715 bool "Gemtek WX5715 (Linksys WRV54G)" depends on ARCH_IXP4XX select FORCE_PCI help This board is currently inside the Linksys WRV54G Gateways. IXP425 - 266mhz 32mb SDRAM 8mb Flash miniPCI slot 0 does not have a card connector soldered to the board miniPCI slot 1 has an ISL3880 802.11g card (Prism54) npe0 is connected to a Kendin KS8995M Switch (4 ports) npe1 is the "wan" port "Console" UART is available on J11 as console "High Speed" UART is n/c (as far as I can tell) 20 Pin ARM/Xscale JTAG interface on J2 config MACH_DEVIXP bool "Omicron DEVIXP" help Say 'Y' here if you want your kernel to support the DEVIXP board from OMICRON electronics GmbH. config MACH_MICCPT bool "Omicron MICCPT" select FORCE_PCI help Say 'Y' here if you want your kernel to support the MICCPT board from OMICRON electronics GmbH. config MACH_MIC256 bool "Omicron MIC256" help Say 'Y' here if you want your kernel to support the MIC256 board from OMICRON electronics GmbH. comment "IXP4xx Options" config IXP4XX_INDIRECT_PCI bool "Use indirect PCI memory access" depends on PCI help IXP4xx provides two methods of accessing PCI memory space: 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). To access PCI via this space, we simply ioremap() the BAR into the kernel and we can use the standard read[bwl]/write[bwl] macros. This is the preferred method due to speed but it limits the system to just 64MB of PCI memory. This can be problematic if using video cards and other memory-heavy devices. 2) If > 64MB of memory space is required, the IXP4xx can be configured to use indirect registers to access the whole PCI memory space. This currently allows for up to 1 GB (0x10000000 to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that every PCI access requires three local register accesses plus a spinlock, but in some cases the performance hit is acceptable. In addition, you cannot mmap() PCI devices in this case due to the indirect nature of the PCI window. By default, the direct method is used. Choose this option if you need to use the indirect method instead. If you don't know what you need, leave this option unselected. config IXP4XX_QMGR tristate "IXP4xx Queue Manager support" help This driver supports IXP4xx built-in hardware queue manager and is automatically selected by Ethernet and HSS drivers. config IXP4XX_NPE tristate "IXP4xx Network Processor Engine support" select FW_LOADER help This driver supports IXP4xx built-in network coprocessors and is automatically selected by Ethernet and HSS drivers. endmenu endif