* Renesas usdhi6rol0 SD/SDIO host controller Required properties: - compatible: must be "renesas,usdhi6rol0" - interrupts: 3 interrupts, named "card detect", "data" and "SDIO" must be specified - clocks: a clock binding for the IMCLK input Optional properties: - vmmc-supply: a phandle of a regulator, supplying Vcc to the card - vqmmc-supply: a phandle of a regulator, supplying VccQ to the card - pinctrl-names: Can contain a "default" entry and a "state_uhs" entry. The state_uhs entry is used together with the default entry when the board requires distinct settings for UHS speeds. - pinctrl-N: One property for each name listed in pinctrl-names, see ../pinctrl/pinctrl-bindings.txt. Additionally any standard mmc bindings from mmc.txt can be used. Example: sd0: sd@ab000000 { compatible = "renesas,usdhi6rol0"; reg = <0xab000000 0x200>; interrupts = <0 23 0x4 0 24 0x4 0 25 0x4>; interrupt-names = "card detect", "data", "SDIO"; bus-width = <4>; max-frequency = <50000000>; cap-power-off-card; clocks = <&imclk>; vmmc-supply = <&vcc_sd0>; vqmmc-supply = <&vccq_sd0>; };