What: /sys/class/net//mesh/aggregated_ogms Date: May 2010 Contact: Marek Lindner Description: Indicates whether the batman protocol messages of the mesh shall be aggregated or not. What: /sys/class/net//mesh//ap_isolation Date: May 2011 Contact: Antonio Quartulli Description: Indicates whether the data traffic going from a wireless client to another wireless client will be silently dropped. is empty when referring to the untagged lan. What: /sys/class/net//mesh/bonding Date: June 2010 Contact: Simon Wunderlich Description: Indicates whether the data traffic going through the mesh will be sent using multiple interfaces at the same time (if available). What: /sys/class/net//mesh/bridge_loop_avoidance Date: November 2011 Contact: Simon Wunderlich Description: Indicates whether the bridge loop avoidance feature is enabled. This feature detects and avoids loops between the mesh and devices bridged with the soft interface . What: /sys/class/net//mesh/fragmentation Date: October 2010 Contact: Andreas Langer Description: Indicates whether the data traffic going through the mesh will be fragmented or silently discarded if the packet size exceeds the outgoing interface MTU. What: /sys/class/net//mesh/gw_bandwidth Date: October 2010 Contact: Marek Lindner Description: Defines the bandwidth which is propagated by this node if gw_mode was set to 'server'. What: /sys/class/net//mesh/gw_mode Date: October 2010 Contact: Marek Lindner Description: Defines the state of the gateway features. Can be either 'off', 'client' or 'server'. What: /sys/class/net//mesh/gw_sel_class Date: October 2010 Contact: Marek Lindner Description: Defines the selection criteria this node will use to choose a gateway if gw_mode was set to 'client'. What: /sys/class/net//mesh/hop_penalty Date: Oct 2010 Contact: Linus Lüssing Description: Defines the penalty which will be applied to an originator message's tq-field on every hop. What: /sys/class/net//mesh/isolation_mark Date: Nov 2013 Contact: Antonio Quartulli Description: Defines the isolation mark (and its bitmask) which is used to classify clients as "isolated" by the Extended Isolation feature. What: /sys/class/net//mesh/multicast_mode Date: Feb 2014 Contact: Linus Lüssing Description: Indicates whether multicast optimizations are enabled or disabled. If set to zero then all nodes in the mesh are going to use classic flooding for any multicast packet with no optimizations. What: /sys/class/net//mesh/network_coding Date: Nov 2012 Contact: Martin Hundeboll Description: Controls whether Network Coding (using some magic to send fewer wifi packets but still the same content) is enabled or not. What: /sys/class/net//mesh/orig_interval Date: May 2010 Contact: Marek Lindner Description: Defines the interval in milliseconds in which batman sends its protocol messages. What: /sys/class/net//mesh/routing_algo Date: Dec 2011 Contact: Marek Lindner Description: Defines the routing procotol this mesh instance uses to find the optimal paths through the mesh.