sound/soc/codecs/wm9081.c

   1 /*
   2  * wm9081.c  --  WM9081 ALSA SoC Audio driver
   3  *
   4  * Author: Mark Brown
   5  *
   6  * Copyright 2009 Wolfson Microelectronics plc
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  *
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/moduleparam.h>
  16 #include <linux/init.h>
  17 #include <linux/delay.h>
  18 #include <linux/pm.h>
  19 #include <linux/i2c.h>
  20 #include <linux/platform_device.h>
  21 #include <sound/core.h>
  22 #include <sound/pcm.h>
  23 #include <sound/pcm_params.h>
  24 #include <sound/soc.h>
  25 #include <sound/soc-dapm.h>
  26 #include <sound/initval.h>
  27 #include <sound/tlv.h>
  28
  29 #include <sound/wm9081.h>
  30 #include "wm9081.h"
  31
  32 static u16 wm9081_reg_defaults[] = {
  33         0x0000,     /* R0  - Software Reset */
  34         0x0000,     /* R1 */
  35         0x00B9,     /* R2  - Analogue Lineout */
  36         0x00B9,     /* R3  - Analogue Speaker PGA */
  37         0x0001,     /* R4  - VMID Control */
  38         0x0068,     /* R5  - Bias Control 1 */
  39         0x0000,     /* R6 */
  40         0x0000,     /* R7  - Analogue Mixer */
  41         0x0000,     /* R8  - Anti Pop Control */
  42         0x01DB,     /* R9  - Analogue Speaker 1 */
  43         0x0018,     /* R10 - Analogue Speaker 2 */
  44         0x0180,     /* R11 - Power Management */
  45         0x0000,     /* R12 - Clock Control 1 */
  46         0x0038,     /* R13 - Clock Control 2 */
  47         0x4000,     /* R14 - Clock Control 3 */
  48         0x0000,     /* R15 */
  49         0x0000,     /* R16 - FLL Control 1 */
  50         0x0200,     /* R17 - FLL Control 2 */
  51         0x0000,     /* R18 - FLL Control 3 */
  52         0x0204,     /* R19 - FLL Control 4 */
  53         0x0000,     /* R20 - FLL Control 5 */
  54         0x0000,     /* R21 */
  55         0x0000,     /* R22 - Audio Interface 1 */
  56         0x0002,     /* R23 - Audio Interface 2 */
  57         0x0008,     /* R24 - Audio Interface 3 */
  58         0x0022,     /* R25 - Audio Interface 4 */
  59         0x0000,     /* R26 - Interrupt Status */
  60         0x0006,     /* R27 - Interrupt Status Mask */
  61         0x0000,     /* R28 - Interrupt Polarity */
  62         0x0000,     /* R29 - Interrupt Control */
  63         0x00C0,     /* R30 - DAC Digital 1 */
  64         0x0008,     /* R31 - DAC Digital 2 */
  65         0x09AF,     /* R32 - DRC 1 */
  66         0x4201,     /* R33 - DRC 2 */
  67         0x0000,     /* R34 - DRC 3 */
  68         0x0000,     /* R35 - DRC 4 */
  69         0x0000,     /* R36 */
  70         0x0000,     /* R37 */
  71         0x0000,     /* R38 - Write Sequencer 1 */
  72         0x0000,     /* R39 - Write Sequencer 2 */
  73         0x0002,     /* R40 - MW Slave 1 */
  74         0x0000,     /* R41 */
  75         0x0000,     /* R42 - EQ 1 */
  76         0x0000,     /* R43 - EQ 2 */
  77         0x0FCA,     /* R44 - EQ 3 */
  78         0x0400,     /* R45 - EQ 4 */
  79         0x00B8,     /* R46 - EQ 5 */
  80         0x1EB5,     /* R47 - EQ 6 */
  81         0xF145,     /* R48 - EQ 7 */
  82         0x0B75,     /* R49 - EQ 8 */
  83         0x01C5,     /* R50 - EQ 9 */
  84         0x169E,     /* R51 - EQ 10 */
  85         0xF829,     /* R52 - EQ 11 */
  86         0x07AD,     /* R53 - EQ 12 */
  87         0x1103,     /* R54 - EQ 13 */
  88         0x1C58,     /* R55 - EQ 14 */
  89         0xF373,     /* R56 - EQ 15 */
  90         0x0A54,     /* R57 - EQ 16 */
  91         0x0558,     /* R58 - EQ 17 */
  92         0x0564,     /* R59 - EQ 18 */
  93         0x0559,     /* R60 - EQ 19 */
  94         0x4000,     /* R61 - EQ 20 */
  95 };
  96
  97 static struct {
  98         int ratio;
  99         int clk_sys_rate;
 100 } clk_sys_rates[] = {
 101         { 64,   0 },
 102         { 128,  1 },
 103         { 192,  2 },
 104         { 256,  3 },
 105         { 384,  4 },
 106         { 512,  5 },
 107         { 768,  6 },
 108         { 1024, 7 },
 109         { 1408, 8 },
 110         { 1536, 9 },
 111 };
 112
 113 static struct {
 114         int rate;
 115         int sample_rate;
 116 } sample_rates[] = {
 117         { 8000,  0  },
 118         { 11025, 1  },
 119         { 12000, 2  },
 120         { 16000, 3  },
 121         { 22050, 4  },
 122         { 24000, 5  },
 123         { 32000, 6  },
 124         { 44100, 7  },
 125         { 48000, 8  },
 126         { 88200, 9  },
 127         { 96000, 10 },
 128 };
 129
 130 static struct {
 131         int div; /* *10 due to .5s */
 132         int bclk_div;
 133 } bclk_divs[] = {
 134         { 10,  0  },
 135         { 15,  1  },
 136         { 20,  2  },
 137         { 30,  3  },
 138         { 40,  4  },
 139         { 50,  5  },
 140         { 55,  6  },
 141         { 60,  7  },
 142         { 80,  8  },
 143         { 100, 9  },
 144         { 110, 10 },
 145         { 120, 11 },
 146         { 160, 12 },
 147         { 200, 13 },
 148         { 220, 14 },
 149         { 240, 15 },
 150         { 250, 16 },
 151         { 300, 17 },
 152         { 320, 18 },
 153         { 440, 19 },
 154         { 480, 20 },
 155 };
 156
 157 struct wm9081_priv {
 158         struct snd_soc_codec codec;
 159         u16 reg_cache[WM9081_MAX_REGISTER + 1];
 160         int sysclk_source;
 161         int mclk_rate;
 162         int sysclk_rate;
 163         int fs;
 164         int bclk;
 165         int master;
 166         int fll_fref;
 167         int fll_fout;
 168         struct wm9081_retune_mobile_config *retune;
 169 };
 170
 171 static int wm9081_reg_is_volatile(int reg)
 172 {
 173         switch (reg) {
 174         default:
 175                 return 0;
 176         }
 177 }
 178
 179 static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec,
 180                                           unsigned int reg)
 181 {
 182         u16 *cache = codec->reg_cache;
 183         BUG_ON(reg > WM9081_MAX_REGISTER);
 184         return cache[reg];
 185 }
 186
 187 static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg)
 188 {
 189         struct i2c_msg xfer[2];
 190         u16 data;
 191         int ret;
 192         struct i2c_client *client = codec->control_data;
 193
 194         BUG_ON(reg > WM9081_MAX_REGISTER);
 195
 196         /* Write register */
 197         xfer[0].addr = client->addr;
 198         xfer[0].flags = 0;
 199         xfer[0].len = 1;
 200         xfer[0].buf = &reg;
 201
 202         /* Read data */
 203         xfer[1].addr = client->addr;
 204         xfer[1].flags = I2C_M_RD;
 205         xfer[1].len = 2;
 206         xfer[1].buf = (u8 *)&data;
 207
 208         ret = i2c_transfer(client->adapter, xfer, 2);
 209         if (ret != 2) {
 210                 dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
 211                 return 0;
 212         }
 213
 214         return (data >> 8) | ((data & 0xff) << 8);
 215 }
 216
 217 static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg)
 218 {
 219         if (wm9081_reg_is_volatile(reg))
 220                 return wm9081_read_hw(codec, reg);
 221         else
 222                 return wm9081_read_reg_cache(codec, reg);
 223 }
 224
 225 static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg,
 226                         unsigned int value)
 227 {
 228         u16 *cache = codec->reg_cache;
 229         u8 data[3];
 230
 231         BUG_ON(reg > WM9081_MAX_REGISTER);
 232
 233         if (!wm9081_reg_is_volatile(reg))
 234                 cache[reg] = value;
 235
 236         data[0] = reg;
 237         data[1] = value >> 8;
 238         data[2] = value & 0x00ff;
 239
 240         if (codec->hw_write(codec->control_data, data, 3) == 3)
 241                 return 0;
 242         else
 243                 return -EIO;
 244 }
 245
 246 static int wm9081_reset(struct snd_soc_codec *codec)
 247 {
 248         return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0);
 249 }
 250
 251 static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
 252 static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0);
 253 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
 254 static unsigned int drc_max_tlv[] = {
 255         TLV_DB_RANGE_HEAD(4),
 256         0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
 257         1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0),
 258         2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
 259         3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
 260 };
 261 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
 262 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0);
 263
 264 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 265
 266 static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0);
 267 static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
 268 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
 269
 270 static const char *drc_high_text[] = {
 271         "1",
 272         "1/2",
 273         "1/4",
 274         "1/8",
 275         "1/16",
 276         "0",
 277 };
 278
 279 static const struct soc_enum drc_high =
 280         SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text);
 281
 282 static const char *drc_low_text[] = {
 283         "1",
 284         "1/2",
 285         "1/4",
 286         "1/8",
 287         "0",
 288 };
 289
 290 static const struct soc_enum drc_low =
 291         SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text);
 292
 293 static const char *drc_atk_text[] = {
 294         "181us",
 295         "181us",
 296         "363us",
 297         "726us",
 298         "1.45ms",
 299         "2.9ms",
 300         "5.8ms",
 301         "11.6ms",
 302         "23.2ms",
 303         "46.4ms",
 304         "92.8ms",
 305         "185.6ms",
 306 };
 307
 308 static const struct soc_enum drc_atk =
 309         SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text);
 310
 311 static const char *drc_dcy_text[] = {
 312         "186ms",
 313         "372ms",
 314         "743ms",
 315         "1.49s",
 316         "2.97s",
 317         "5.94s",
 318         "11.89s",
 319         "23.78s",
 320         "47.56s",
 321 };
 322
 323 static const struct soc_enum drc_dcy =
 324         SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text);
 325
 326 static const char *drc_qr_dcy_text[] = {
 327         "0.725ms",
 328         "1.45ms",
 329         "5.8ms",
 330 };
 331
 332 static const struct soc_enum drc_qr_dcy =
 333         SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text);
 334
 335 static const char *dac_deemph_text[] = {
 336         "None",
 337         "32kHz",
 338         "44.1kHz",
 339         "48kHz",
 340 };
 341
 342 static const struct soc_enum dac_deemph =
 343         SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text);
 344
 345 static const char *speaker_mode_text[] = {
 346         "Class D",
 347         "Class AB",
 348 };
 349
 350 static const struct soc_enum speaker_mode =
 351         SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text);
 352
 353 static int speaker_mode_get(struct snd_kcontrol *kcontrol,
 354                             struct snd_ctl_elem_value *ucontrol)
 355 {
 356         struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 357         unsigned int reg;
 358
 359         reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
 360         if (reg & WM9081_SPK_MODE)
 361                 ucontrol->value.integer.value[0] = 1;
 362         else
 363                 ucontrol->value.integer.value[0] = 0;
 364
 365         return 0;
 366 }
 367
 368 /*
 369  * Stop any attempts to change speaker mode while the speaker is enabled.
 370  *
 371  * We also have some special anti-pop controls dependant on speaker
 372  * mode which must be changed along with the mode.
 373  */
 374 static int speaker_mode_put(struct snd_kcontrol *kcontrol,
 375                             struct snd_ctl_elem_value *ucontrol)
 376 {
 377         struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 378         unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
 379         unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
 380
 381         /* Are we changing anything? */
 382         if (ucontrol->value.integer.value[0] ==
 383             ((reg2 & WM9081_SPK_MODE) != 0))
 384                 return 0;
 385
 386         /* Don't try to change modes while enabled */
 387         if (reg_pwr & WM9081_SPK_ENA)
 388                 return -EINVAL;
 389
 390         if (ucontrol->value.integer.value[0]) {
 391                 /* Class AB */
 392                 reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL);
 393                 reg2 |= WM9081_SPK_MODE;
 394         } else {
 395                 /* Class D */
 396                 reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL;
 397                 reg2 &= ~WM9081_SPK_MODE;
 398         }
 399
 400         wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
 401
 402         return 0;
 403 }
 404
 405 static const struct snd_kcontrol_new wm9081_snd_controls[] = {
 406 SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv),
 407 SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv),
 408
 409 SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv),
 410
 411 SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1),
 412 SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0),
 413 SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv),
 414
 415 SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0),
 416 SOC_ENUM("DRC High Slope", drc_high),
 417 SOC_ENUM("DRC Low Slope", drc_low),
 418 SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv),
 419 SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv),
 420 SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv),
 421 SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv),
 422 SOC_ENUM("DRC Attack", drc_atk),
 423 SOC_ENUM("DRC Decay", drc_dcy),
 424 SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0),
 425 SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv),
 426 SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy),
 427 SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv),
 428
 429 SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0),
 430
 431 SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0),
 432 SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0),
 433 SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1),
 434 SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0),
 435 SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0,
 436                out_tlv),
 437 SOC_ENUM("DAC Deemphasis", dac_deemph),
 438 SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put),
 439 };
 440
 441 static const struct snd_kcontrol_new wm9081_eq_controls[] = {
 442 SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv),
 443 SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv),
 444 SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv),
 445 SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv),
 446 SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv),
 447 };
 448
 449 static const struct snd_kcontrol_new mixer[] = {
 450 SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0),
 451 SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0),
 452 SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0),
 453 };
 454
 455 static int speaker_event(struct snd_soc_dapm_widget *w,
 456                          struct snd_kcontrol *kcontrol, int event)
 457 {
 458         struct snd_soc_codec *codec = w->codec;
 459         unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
 460
 461         switch (event) {
 462         case SND_SOC_DAPM_POST_PMU:
 463                 reg |= WM9081_SPK_ENA;
 464                 break;
 465
 466         case SND_SOC_DAPM_PRE_PMD:
 467                 reg &= ~WM9081_SPK_ENA;
 468                 break;
 469         }
 470
 471         wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg);
 472
 473         return 0;
 474 }
 475
 476 struct _fll_div {
 477         u16 fll_fratio;
 478         u16 fll_outdiv;
 479         u16 fll_clk_ref_div;
 480         u16 n;
 481         u16 k;
 482 };
 483
 484 /* The size in bits of the FLL divide multiplied by 10
 485  * to allow rounding later */
 486 #define FIXED_FLL_SIZE ((1 << 16) * 10)
 487
 488 static struct {
 489         unsigned int min;
 490         unsigned int max;
 491         u16 fll_fratio;
 492         int ratio;
 493 } fll_fratios[] = {
 494         {       0,    64000, 4, 16 },
 495         {   64000,   128000, 3,  8 },
 496         {  128000,   256000, 2,  4 },
 497         {  256000,  1000000, 1,  2 },
 498         { 1000000, 13500000, 0,  1 },
 499 };
 500
 501 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 502                        unsigned int Fout)
 503 {
 504         u64 Kpart;
 505         unsigned int K, Ndiv, Nmod, target;
 506         unsigned int div;
 507         int i;
 508
 509         /* Fref must be <=13.5MHz */
 510         div = 1;
 511         while ((Fref / div) > 13500000) {
 512                 div *= 2;
 513
 514                 if (div > 8) {
 515                         pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
 516                                Fref);
 517                         return -EINVAL;
 518                 }
 519         }
 520         fll_div->fll_clk_ref_div = div / 2;
 521
 522         pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
 523
 524         /* Apply the division for our remaining calculations */
 525         Fref /= div;
 526
 527         /* Fvco should be 90-100MHz; don't check the upper bound */
 528         div = 0;
 529         target = Fout * 2;
 530         while (target < 90000000) {
 531                 div++;
 532                 target *= 2;
 533                 if (div > 7) {
 534                         pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
 535                                Fout);
 536                         return -EINVAL;
 537                 }
 538         }
 539         fll_div->fll_outdiv = div;
 540
 541         pr_debug("Fvco=%dHz\n", target);
 542
 543         /* Find an appropraite FLL_FRATIO and factor it out of the target */
 544         for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 545                 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 546                         fll_div->fll_fratio = fll_fratios[i].fll_fratio;
 547                         target /= fll_fratios[i].ratio;
 548                         break;
 549                 }
 550         }
 551         if (i == ARRAY_SIZE(fll_fratios)) {
 552                 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
 553                 return -EINVAL;
 554         }
 555
 556         /* Now, calculate N.K */
 557         Ndiv = target / Fref;
 558
 559         fll_div->n = Ndiv;
 560         Nmod = target % Fref;
 561         pr_debug("Nmod=%d\n", Nmod);
 562
 563         /* Calculate fractional part - scale up so we can round. */
 564         Kpart = FIXED_FLL_SIZE * (long long)Nmod;
 565
 566         do_div(Kpart, Fref);
 567
 568         K = Kpart & 0xFFFFFFFF;
 569
 570         if ((K % 10) >= 5)
 571                 K += 5;
 572
 573         /* Move down to proper range now rounding is done */
 574         fll_div->k = K / 10;
 575
 576         pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
 577                  fll_div->n, fll_div->k,
 578                  fll_div->fll_fratio, fll_div->fll_outdiv,
 579                  fll_div->fll_clk_ref_div);
 580
 581         return 0;
 582 }
 583
 584 static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id,
 585                           unsigned int Fref, unsigned int Fout)
 586 {
 587         struct wm9081_priv *wm9081 = codec->private_data;
 588         u16 reg1, reg4, reg5;
 589         struct _fll_div fll_div;
 590         int ret;
 591         int clk_sys_reg;
 592
 593         /* Any change? */
 594         if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout)
 595                 return 0;
 596
 597         /* Disable the FLL */
 598         if (Fout == 0) {
 599                 dev_dbg(codec->dev, "FLL disabled\n");
 600                 wm9081->fll_fref = 0;
 601                 wm9081->fll_fout = 0;
 602
 603                 return 0;
 604         }
 605
 606         ret = fll_factors(&fll_div, Fref, Fout);
 607         if (ret != 0)
 608                 return ret;
 609
 610         reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5);
 611         reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
 612
 613         switch (fll_id) {
 614         case WM9081_SYSCLK_FLL_MCLK:
 615                 reg5 |= 0x1;
 616                 break;
 617
 618         default:
 619                 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
 620                 return -EINVAL;
 621         }
 622
 623         /* Disable CLK_SYS while we reconfigure */
 624         clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
 625         if (clk_sys_reg & WM9081_CLK_SYS_ENA)
 626                 wm9081_write(codec, WM9081_CLOCK_CONTROL_3,
 627                              clk_sys_reg & ~WM9081_CLK_SYS_ENA);
 628
 629         /* Any FLL configuration change requires that the FLL be
 630          * disabled first. */
 631         reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1);
 632         reg1 &= ~WM9081_FLL_ENA;
 633         wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
 634
 635         /* Apply the configuration */
 636         if (fll_div.k)
 637                 reg1 |= WM9081_FLL_FRAC_MASK;
 638         else
 639                 reg1 &= ~WM9081_FLL_FRAC_MASK;
 640         wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
 641
 642         wm9081_write(codec, WM9081_FLL_CONTROL_2,
 643                      (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
 644                      (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
 645         wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
 646
 647         reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4);
 648         reg4 &= ~WM9081_FLL_N_MASK;
 649         reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
 650         wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4);
 651
 652         reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
 653         reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
 654         wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5);
 655
 656         /* Enable the FLL */
 657         wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
 658
 659         /* Then bring CLK_SYS up again if it was disabled */
 660         if (clk_sys_reg & WM9081_CLK_SYS_ENA)
 661                 wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
 662
 663         dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
 664
 665         wm9081->fll_fref = Fref;
 666         wm9081->fll_fout = Fout;
 667
 668         return 0;
 669 }
 670
 671 static int configure_clock(struct snd_soc_codec *codec)
 672 {
 673         struct wm9081_priv *wm9081 = codec->private_data;
 674         int new_sysclk, i, target;
 675         unsigned int reg;
 676         int ret = 0;
 677         int mclkdiv = 0;
 678         int fll = 0;
 679
 680         switch (wm9081->sysclk_source) {
 681         case WM9081_SYSCLK_MCLK:
 682                 if (wm9081->mclk_rate > 12225000) {
 683                         mclkdiv = 1;
 684                         wm9081->sysclk_rate = wm9081->mclk_rate / 2;
 685                 } else {
 686                         wm9081->sysclk_rate = wm9081->mclk_rate;
 687                 }
 688                 wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0);
 689                 break;
 690
 691         case WM9081_SYSCLK_FLL_MCLK:
 692                 /* If we have a sample rate calculate a CLK_SYS that
 693                  * gives us a suitable DAC configuration, plus BCLK.
 694                  * Ideally we would check to see if we can clock
 695                  * directly from MCLK and only use the FLL if this is
 696                  * not the case, though care must be taken with free
 697                  * running mode.
 698                  */
 699                 if (wm9081->master && wm9081->bclk) {
 700                         /* Make sure we can generate CLK_SYS and BCLK
 701                          * and that we've got 3MHz for optimal
 702                          * performance. */
 703                         for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
 704                                 target = wm9081->fs * clk_sys_rates[i].ratio;
 705                                 new_sysclk = target;
 706                                 if (target >= wm9081->bclk &&
 707                                     target > 3000000)
 708                                         break;
 709                         }
 710                 } else if (wm9081->fs) {
 711                         for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
 712                                 new_sysclk = clk_sys_rates[i].ratio
 713                                         * wm9081->fs;
 714                                 if (new_sysclk > 3000000)
 715                                         break;
 716                         }
 717                 } else {
 718                         new_sysclk = 12288000;
 719                 }
 720
 721                 ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK,
 722                                      wm9081->mclk_rate, new_sysclk);
 723                 if (ret == 0) {
 724                         wm9081->sysclk_rate = new_sysclk;
 725
 726                         /* Switch SYSCLK over to FLL */
 727                         fll = 1;
 728                 } else {
 729                         wm9081->sysclk_rate = wm9081->mclk_rate;
 730                 }
 731                 break;
 732
 733         default:
 734                 return -EINVAL;
 735         }
 736
 737         reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1);
 738         if (mclkdiv)
 739                 reg |= WM9081_MCLKDIV2;
 740         else
 741                 reg &= ~WM9081_MCLKDIV2;
 742         wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg);
 743
 744         reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
 745         if (fll)
 746                 reg |= WM9081_CLK_SRC_SEL;
 747         else
 748                 reg &= ~WM9081_CLK_SRC_SEL;
 749         wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg);
 750
 751         dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
 752
 753         return ret;
 754 }
 755
 756 static int clk_sys_event(struct snd_soc_dapm_widget *w,
 757                          struct snd_kcontrol *kcontrol, int event)
 758 {
 759         struct snd_soc_codec *codec = w->codec;
 760         struct wm9081_priv *wm9081 = codec->private_data;
 761
 762         /* This should be done on init() for bypass paths */
 763         switch (wm9081->sysclk_source) {
 764         case WM9081_SYSCLK_MCLK:
 765                 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate);
 766                 break;
 767         case WM9081_SYSCLK_FLL_MCLK:
 768                 dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n",
 769                         wm9081->mclk_rate);
 770                 break;
 771         default:
 772                 dev_err(codec->dev, "System clock not configured\n");
 773                 return -EINVAL;
 774         }
 775
 776         switch (event) {
 777         case SND_SOC_DAPM_PRE_PMU:
 778                 configure_clock(codec);
 779                 break;
 780
 781         case SND_SOC_DAPM_POST_PMD:
 782                 /* Disable the FLL if it's running */
 783                 wm9081_set_fll(codec, 0, 0, 0);
 784                 break;
 785         }
 786
 787         return 0;
 788 }
 789
 790 static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = {
 791 SND_SOC_DAPM_INPUT("IN1"),
 792 SND_SOC_DAPM_INPUT("IN2"),
 793
 794 SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0),
 795
 796 SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
 797                              mixer, ARRAY_SIZE(mixer)),
 798
 799 SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
 800
 801 SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0,
 802                    speaker_event,
 803                    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 804
 805 SND_SOC_DAPM_OUTPUT("LINEOUT"),
 806 SND_SOC_DAPM_OUTPUT("SPKN"),
 807 SND_SOC_DAPM_OUTPUT("SPKP"),
 808
 809 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event,
 810                     SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 811 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0),
 812 SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
 813 };
 814
 815
 816 static const struct snd_soc_dapm_route audio_paths[] = {
 817         { "DAC", NULL, "CLK_SYS" },
 818         { "DAC", NULL, "CLK_DSP" },
 819
 820         { "Mixer", "IN1 Switch", "IN1" },
 821         { "Mixer", "IN2 Switch", "IN2" },
 822         { "Mixer", "Playback Switch", "DAC" },
 823
 824         { "LINEOUT PGA", NULL, "Mixer" },
 825         { "LINEOUT PGA", NULL, "TOCLK" },
 826         { "LINEOUT PGA", NULL, "CLK_SYS" },
 827
 828         { "LINEOUT", NULL, "LINEOUT PGA" },
 829
 830         { "Speaker PGA", NULL, "Mixer" },
 831         { "Speaker PGA", NULL, "TOCLK" },
 832         { "Speaker PGA", NULL, "CLK_SYS" },
 833
 834         { "SPKN", NULL, "Speaker PGA" },
 835         { "SPKP", NULL, "Speaker PGA" },
 836 };
 837
 838 static int wm9081_set_bias_level(struct snd_soc_codec *codec,
 839                                  enum snd_soc_bias_level level)
 840 {
 841         u16 reg;
 842
 843         switch (level) {
 844         case SND_SOC_BIAS_ON:
 845                 break;
 846
 847         case SND_SOC_BIAS_PREPARE:
 848                 /* VMID=2*40k */
 849                 reg = wm9081_read(codec, WM9081_VMID_CONTROL);
 850                 reg &= ~WM9081_VMID_SEL_MASK;
 851                 reg |= 0x2;
 852                 wm9081_write(codec, WM9081_VMID_CONTROL, reg);
 853
 854                 /* Normal bias current */
 855                 reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
 856                 reg &= ~WM9081_STBY_BIAS_ENA;
 857                 wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
 858                 break;
 859
 860         case SND_SOC_BIAS_STANDBY:
 861                 /* Initial cold start */
 862                 if (codec->bias_level == SND_SOC_BIAS_OFF) {
 863                         /* Disable LINEOUT discharge */
 864                         reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
 865                         reg &= ~WM9081_LINEOUT_DISCH;
 866                         wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
 867
 868                         /* Select startup bias source */
 869                         reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
 870                         reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
 871                         wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
 872
 873                         /* VMID 2*4k; Soft VMID ramp enable */
 874                         reg = wm9081_read(codec, WM9081_VMID_CONTROL);
 875                         reg |= WM9081_VMID_RAMP | 0x6;
 876                         wm9081_write(codec, WM9081_VMID_CONTROL, reg);
 877
 878                         mdelay(100);
 879
 880                         /* Normal bias enable & soft start off */
 881                         reg |= WM9081_BIAS_ENA;
 882                         reg &= ~WM9081_VMID_RAMP;
 883                         wm9081_write(codec, WM9081_VMID_CONTROL, reg);
 884
 885                         /* Standard bias source */
 886                         reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
 887                         reg &= ~WM9081_BIAS_SRC;
 888                         wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
 889                 }
 890
 891                 /* VMID 2*240k */
 892                 reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
 893                 reg &= ~WM9081_VMID_SEL_MASK;
 894                 reg |= 0x40;
 895                 wm9081_write(codec, WM9081_VMID_CONTROL, reg);
 896
 897                 /* Standby bias current on */
 898                 reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
 899                 reg |= WM9081_STBY_BIAS_ENA;
 900                 wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
 901                 break;
 902
 903         case SND_SOC_BIAS_OFF:
 904                 /* Startup bias source */
 905                 reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
 906                 reg |= WM9081_BIAS_SRC;
 907                 wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
 908
 909                 /* Disable VMID and biases with soft ramping */
 910                 reg = wm9081_read(codec, WM9081_VMID_CONTROL);
 911                 reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
 912                 reg |= WM9081_VMID_RAMP;
 913                 wm9081_write(codec, WM9081_VMID_CONTROL, reg);
 914
 915                 /* Actively discharge LINEOUT */
 916                 reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
 917                 reg |= WM9081_LINEOUT_DISCH;
 918                 wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
 919                 break;
 920         }
 921
 922         codec->bias_level = level;
 923
 924         return 0;
 925 }
 926
 927 static int wm9081_set_dai_fmt(struct snd_soc_dai *dai,
 928                               unsigned int fmt)
 929 {
 930         struct snd_soc_codec *codec = dai->codec;
 931         struct wm9081_priv *wm9081 = codec->private_data;
 932         unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
 933
 934         aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
 935                   WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
 936
 937         switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 938         case SND_SOC_DAIFMT_CBS_CFS:
 939                 wm9081->master = 0;
 940                 break;
 941         case SND_SOC_DAIFMT_CBS_CFM:
 942                 aif2 |= WM9081_LRCLK_DIR;
 943                 wm9081->master = 1;
 944                 break;
 945         case SND_SOC_DAIFMT_CBM_CFS:
 946                 aif2 |= WM9081_BCLK_DIR;
 947                 wm9081->master = 1;
 948                 break;
 949         case SND_SOC_DAIFMT_CBM_CFM:
 950                 aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR;
 951                 wm9081->master = 1;
 952                 break;
 953         default:
 954                 return -EINVAL;
 955         }
 956
 957         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 958         case SND_SOC_DAIFMT_DSP_B:
 959                 aif2 |= WM9081_AIF_LRCLK_INV;
 960         case SND_SOC_DAIFMT_DSP_A:
 961                 aif2 |= 0x3;
 962                 break;
 963         case SND_SOC_DAIFMT_I2S:
 964                 aif2 |= 0x2;
 965                 break;
 966         case SND_SOC_DAIFMT_RIGHT_J:
 967                 break;
 968         case SND_SOC_DAIFMT_LEFT_J:
 969                 aif2 |= 0x1;
 970                 break;
 971         default:
 972                 return -EINVAL;
 973         }
 974
 975         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 976         case SND_SOC_DAIFMT_DSP_A:
 977         case SND_SOC_DAIFMT_DSP_B:
 978                 /* frame inversion not valid for DSP modes */
 979                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 980                 case SND_SOC_DAIFMT_NB_NF:
 981                         break;
 982                 case SND_SOC_DAIFMT_IB_NF:
 983                         aif2 |= WM9081_AIF_BCLK_INV;
 984                         break;
 985                 default:
 986                         return -EINVAL;
 987                 }
 988                 break;
 989
 990         case SND_SOC_DAIFMT_I2S:
 991         case SND_SOC_DAIFMT_RIGHT_J:
 992         case SND_SOC_DAIFMT_LEFT_J:
 993                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 994                 case SND_SOC_DAIFMT_NB_NF:
 995                         break;
 996                 case SND_SOC_DAIFMT_IB_IF:
 997                         aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV;
 998                         break;
 999                 case SND_SOC_DAIFMT_IB_NF:
1000                         aif2 |= WM9081_AIF_BCLK_INV;
1001                         break;
1002                 case SND_SOC_DAIFMT_NB_IF:
1003                         aif2 |= WM9081_AIF_LRCLK_INV;
1004                         break;
1005                 default:
1006                         return -EINVAL;
1007                 }
1008                 break;
1009         default:
1010                 return -EINVAL;
1011         }
1012
1013         wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
1014
1015         return 0;
1016 }
1017
1018 static int wm9081_hw_params(struct snd_pcm_substream *substream,
1019                             struct snd_pcm_hw_params *params,
1020                             struct snd_soc_dai *dai)
1021 {
1022         struct snd_soc_codec *codec = dai->codec;
1023         struct wm9081_priv *wm9081 = codec->private_data;
1024         int ret, i, best, best_val, cur_val;
1025         unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
1026
1027         clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2);
1028         clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
1029
1030         aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
1031
1032         aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
1033         aif2 &= ~WM9081_AIF_WL_MASK;
1034
1035         aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3);
1036         aif3 &= ~WM9081_BCLK_DIV_MASK;
1037
1038         aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4);
1039         aif4 &= ~WM9081_LRCLK_RATE_MASK;
1040
1041         /* What BCLK do we need? */
1042         wm9081->fs = params_rate(params);
1043         wm9081->bclk = 2 * wm9081->fs;
1044         switch (params_format(params)) {
1045         case SNDRV_PCM_FORMAT_S16_LE:
1046                 wm9081->bclk *= 16;
1047                 break;
1048         case SNDRV_PCM_FORMAT_S20_3LE:
1049                 wm9081->bclk *= 20;
1050                 aif2 |= 0x4;
1051                 break;
1052         case SNDRV_PCM_FORMAT_S24_LE:
1053                 wm9081->bclk *= 24;
1054                 aif2 |= 0x8;
1055                 break;
1056         case SNDRV_PCM_FORMAT_S32_LE:
1057                 wm9081->bclk *= 32;
1058                 aif2 |= 0xc;
1059                 break;
1060         default:
1061                 return -EINVAL;
1062         }
1063
1064         if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) {
1065                 int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
1066                              WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
1067                 wm9081->bclk *= slots;
1068         }
1069
1070         dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
1071
1072         ret = configure_clock(codec);
1073         if (ret != 0)
1074                 return ret;
1075
1076         /* Select nearest CLK_SYS_RATE */
1077         best = 0;
1078         best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio)
1079                        - wm9081->fs);
1080         for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1081                 cur_val = abs((wm9081->sysclk_rate /
1082                                clk_sys_rates[i].ratio) - wm9081->fs);;
1083                 if (cur_val < best_val) {
1084                         best = i;
1085                         best_val = cur_val;
1086                 }
1087         }
1088         dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1089                 clk_sys_rates[best].ratio);
1090         clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate
1091                       << WM9081_CLK_SYS_RATE_SHIFT);
1092
1093         /* SAMPLE_RATE */
1094         best = 0;
1095         best_val = abs(wm9081->fs - sample_rates[0].rate);
1096         for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1097                 /* Closest match */
1098                 cur_val = abs(wm9081->fs - sample_rates[i].rate);
1099                 if (cur_val < best_val) {
1100                         best = i;
1101                         best_val = cur_val;
1102                 }
1103         }
1104         dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1105                 sample_rates[best].rate);
1106         clk_ctrl2 |= (sample_rates[best].sample_rate
1107                         << WM9081_SAMPLE_RATE_SHIFT);
1108
1109         /* BCLK_DIV */
1110         best = 0;
1111         best_val = INT_MAX;
1112         for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1113                 cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div)
1114                         - wm9081->bclk;
1115                 if (cur_val < 0) /* Table is sorted */
1116                         break;
1117                 if (cur_val < best_val) {
1118                         best = i;
1119                         best_val = cur_val;
1120                 }
1121         }
1122         wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div;
1123         dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1124                 bclk_divs[best].div, wm9081->bclk);
1125         aif3 |= bclk_divs[best].bclk_div;
1126
1127         /* LRCLK is a simple fraction of BCLK */
1128         dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs);
1129         aif4 |= wm9081->bclk / wm9081->fs;
1130
1131         /* Apply a ReTune Mobile configuration if it's in use */
1132         if (wm9081->retune) {
1133                 struct wm9081_retune_mobile_config *retune = wm9081->retune;
1134                 struct wm9081_retune_mobile_setting *s;
1135                 int eq1;
1136
1137                 best = 0;
1138                 best_val = abs(retune->configs[0].rate - wm9081->fs);
1139                 for (i = 0; i < retune->num_configs; i++) {
1140                         cur_val = abs(retune->configs[i].rate - wm9081->fs);
1141                         if (cur_val < best_val) {
1142                                 best_val = cur_val;
1143                                 best = i;
1144                         }
1145                 }
1146                 s = &retune->configs[best];
1147
1148                 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1149                         s->name, s->rate);
1150
1151                 /* If the EQ is enabled then disable it while we write out */
1152                 eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
1153                 if (eq1 & WM9081_EQ_ENA)
1154                         wm9081_write(codec, WM9081_EQ_1, 0);
1155
1156                 /* Write out the other values */
1157                 for (i = 1; i < ARRAY_SIZE(s->config); i++)
1158                         wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]);
1159
1160                 eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
1161                 wm9081_write(codec, WM9081_EQ_1, eq1);
1162         }
1163
1164         wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
1165         wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
1166         wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
1167         wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
1168
1169         return 0;
1170 }
1171
1172 static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1173 {
1174         struct snd_soc_codec *codec = codec_dai->codec;
1175         unsigned int reg;
1176
1177         reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2);
1178
1179         if (mute)
1180                 reg |= WM9081_DAC_MUTE;
1181         else
1182                 reg &= ~WM9081_DAC_MUTE;
1183
1184         wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg);
1185
1186         return 0;
1187 }
1188
1189 static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai,
1190                              int clk_id, unsigned int freq, int dir)
1191 {
1192         struct snd_soc_codec *codec = codec_dai->codec;
1193         struct wm9081_priv *wm9081 = codec->private_data;
1194
1195         switch (clk_id) {
1196         case WM9081_SYSCLK_MCLK:
1197         case WM9081_SYSCLK_FLL_MCLK:
1198                 wm9081->sysclk_source = clk_id;
1199                 wm9081->mclk_rate = freq;
1200                 break;
1201
1202         default:
1203                 return -EINVAL;
1204         }
1205
1206         return 0;
1207 }
1208
1209 static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
1210                                unsigned int mask, int slots)
1211 {
1212         struct snd_soc_codec *codec = dai->codec;
1213         unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
1214
1215         aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
1216
1217         if (slots < 1 || slots > 4)
1218                 return -EINVAL;
1219
1220         aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
1221
1222         switch (mask) {
1223         case 1:
1224                 break;
1225         case 2:
1226                 aif1 |= 0x10;
1227                 break;
1228         case 4:
1229                 aif1 |= 0x20;
1230                 break;
1231         case 8:
1232                 aif1 |= 0x30;
1233                 break;
1234         default:
1235                 return -EINVAL;
1236         }
1237
1238         wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
1239
1240         return 0;
1241 }
1242
1243 #define WM9081_RATES SNDRV_PCM_RATE_8000_96000
1244
1245 #define WM9081_FORMATS \
1246         (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
1247          SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
1248
1249 static struct snd_soc_dai_ops wm9081_dai_ops = {
1250         .hw_params = wm9081_hw_params,
1251         .set_sysclk = wm9081_set_sysclk,
1252         .set_fmt = wm9081_set_dai_fmt,
1253         .digital_mute = wm9081_digital_mute,
1254         .set_tdm_slot = wm9081_set_tdm_slot,
1255 };
1256
1257 /* We report two channels because the CODEC processes a stereo signal, even
1258  * though it is only capable of handling a mono output.
1259  */
1260 struct snd_soc_dai wm9081_dai = {
1261         .name = "WM9081",
1262         .playback = {
1263                 .stream_name = "HiFi Playback",
1264                 .channels_min = 1,
1265                 .channels_max = 2,
1266                 .rates = WM9081_RATES,
1267                 .formats = WM9081_FORMATS,
1268         },
1269         .ops = &wm9081_dai_ops,
1270 };
1271 EXPORT_SYMBOL_GPL(wm9081_dai);
1272
1273
1274 static struct snd_soc_codec *wm9081_codec;
1275
1276 static int wm9081_probe(struct platform_device *pdev)
1277 {
1278         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1279         struct snd_soc_codec *codec;
1280         struct wm9081_priv *wm9081;
1281         int ret = 0;
1282
1283         if (wm9081_codec == NULL) {
1284                 dev_err(&pdev->dev, "Codec device not registered\n");
1285                 return -ENODEV;
1286         }
1287
1288         socdev->card->codec = wm9081_codec;
1289         codec = wm9081_codec;
1290         wm9081 = codec->private_data;
1291
1292         /* register pcms */
1293         ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
1294         if (ret < 0) {
1295                 dev_err(codec->dev, "failed to create pcms: %d\n", ret);
1296                 goto pcm_err;
1297         }
1298
1299         snd_soc_add_controls(codec, wm9081_snd_controls,
1300                              ARRAY_SIZE(wm9081_snd_controls));
1301         if (!wm9081->retune) {
1302                 dev_dbg(codec->dev,
1303                         "No ReTune Mobile data, using normal EQ\n");
1304                 snd_soc_add_controls(codec, wm9081_eq_controls,
1305                                      ARRAY_SIZE(wm9081_eq_controls));
1306         }
1307
1308         snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets,
1309                                   ARRAY_SIZE(wm9081_dapm_widgets));
1310         snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
1311         snd_soc_dapm_new_widgets(codec);
1312
1313         ret = snd_soc_init_card(socdev);
1314         if (ret < 0) {
1315                 dev_err(codec->dev, "failed to register card: %d\n", ret);
1316                 goto card_err;
1317         }
1318
1319         return ret;
1320
1321 card_err:
1322         snd_soc_free_pcms(socdev);
1323         snd_soc_dapm_free(socdev);
1324 pcm_err:
1325         return ret;
1326 }
1327
1328 static int wm9081_remove(struct platform_device *pdev)
1329 {
1330         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1331
1332         snd_soc_free_pcms(socdev);
1333         snd_soc_dapm_free(socdev);
1334
1335         return 0;
1336 }
1337
1338 #ifdef CONFIG_PM
1339 static int wm9081_suspend(struct platform_device *pdev, pm_message_t state)
1340 {
1341         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1342         struct snd_soc_codec *codec = socdev->card->codec;
1343
1344         wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
1345
1346         return 0;
1347 }
1348
1349 static int wm9081_resume(struct platform_device *pdev)
1350 {
1351         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1352         struct snd_soc_codec *codec = socdev->card->codec;
1353         u16 *reg_cache = codec->reg_cache;
1354         int i;
1355
1356         for (i = 0; i < codec->reg_cache_size; i++) {
1357                 if (i == WM9081_SOFTWARE_RESET)
1358                         continue;
1359
1360                 wm9081_write(codec, i, reg_cache[i]);
1361         }
1362
1363         wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1364
1365         return 0;
1366 }
1367 #else
1368 #define wm9081_suspend NULL
1369 #define wm9081_resume NULL
1370 #endif
1371
1372 struct snd_soc_codec_device soc_codec_dev_wm9081 = {
1373         .probe =        wm9081_probe,
1374         .remove =       wm9081_remove,
1375         .suspend =      wm9081_suspend,
1376         .resume =       wm9081_resume,
1377 };
1378 EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081);
1379
1380 static int wm9081_register(struct wm9081_priv *wm9081)
1381 {
1382         struct snd_soc_codec *codec = &wm9081->codec;
1383         int ret;
1384         u16 reg;
1385
1386         if (wm9081_codec) {
1387                 dev_err(codec->dev, "Another WM9081 is registered\n");
1388                 ret = -EINVAL;
1389                 goto err;
1390         }
1391
1392         mutex_init(&codec->mutex);
1393         INIT_LIST_HEAD(&codec->dapm_widgets);
1394         INIT_LIST_HEAD(&codec->dapm_paths);
1395
1396         codec->private_data = wm9081;
1397         codec->name = "WM9081";
1398         codec->owner = THIS_MODULE;
1399         codec->read = wm9081_read;
1400         codec->write = wm9081_write;
1401         codec->dai = &wm9081_dai;
1402         codec->num_dai = 1;
1403         codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache);
1404         codec->reg_cache = &wm9081->reg_cache;
1405         codec->bias_level = SND_SOC_BIAS_OFF;
1406         codec->set_bias_level = wm9081_set_bias_level;
1407
1408         memcpy(codec->reg_cache, wm9081_reg_defaults,
1409                sizeof(wm9081_reg_defaults));
1410
1411         reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET);
1412         if (reg != 0x9081) {
1413                 dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
1414                 ret = -EINVAL;
1415                 goto err;
1416         }
1417
1418         ret = wm9081_reset(codec);
1419         if (ret < 0) {
1420                 dev_err(codec->dev, "Failed to issue reset\n");
1421                 return ret;
1422         }
1423
1424         wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1425
1426         /* Enable zero cross by default */
1427         reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT);
1428         wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
1429         reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
1430         wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
1431                      reg | WM9081_SPKPGAZC);
1432
1433         wm9081_dai.dev = codec->dev;
1434
1435         wm9081_codec = codec;
1436
1437         ret = snd_soc_register_codec(codec);
1438         if (ret != 0) {
1439                 dev_err(codec->dev, "Failed to register codec: %d\n", ret);
1440                 return ret;
1441         }
1442
1443         ret = snd_soc_register_dai(&wm9081_dai);
1444         if (ret != 0) {
1445                 dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
1446                 snd_soc_unregister_codec(codec);
1447                 return ret;
1448         }
1449
1450         return 0;
1451
1452 err:
1453         kfree(wm9081);
1454         return ret;
1455 }
1456
1457 static void wm9081_unregister(struct wm9081_priv *wm9081)
1458 {
1459         wm9081_set_bias_level(&wm9081->codec, SND_SOC_BIAS_OFF);
1460         snd_soc_unregister_dai(&wm9081_dai);
1461         snd_soc_unregister_codec(&wm9081->codec);
1462         kfree(wm9081);
1463         wm9081_codec = NULL;
1464 }
1465
1466 static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
1467                                       const struct i2c_device_id *id)
1468 {
1469         struct wm9081_priv *wm9081;
1470         struct snd_soc_codec *codec;
1471
1472         wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL);
1473         if (wm9081 == NULL)
1474                 return -ENOMEM;
1475
1476         codec = &wm9081->codec;
1477         codec->hw_write = (hw_write_t)i2c_master_send;
1478         wm9081->retune = i2c->dev.platform_data;
1479
1480         i2c_set_clientdata(i2c, wm9081);
1481         codec->control_data = i2c;
1482
1483         codec->dev = &i2c->dev;
1484
1485         return wm9081_register(wm9081);
1486 }
1487
1488 static __devexit int wm9081_i2c_remove(struct i2c_client *client)
1489 {
1490         struct wm9081_priv *wm9081 = i2c_get_clientdata(client);
1491         wm9081_unregister(wm9081);
1492         return 0;
1493 }
1494
1495 static const struct i2c_device_id wm9081_i2c_id[] = {
1496         { "wm9081", 0 },
1497         { }
1498 };
1499 MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id);
1500
1501 static struct i2c_driver wm9081_i2c_driver = {
1502         .driver = {
1503                 .name = "wm9081",
1504                 .owner = THIS_MODULE,
1505         },
1506         .probe =    wm9081_i2c_probe,
1507         .remove =   __devexit_p(wm9081_i2c_remove),
1508         .id_table = wm9081_i2c_id,
1509 };
1510
1511 static int __init wm9081_modinit(void)
1512 {
1513         int ret;
1514
1515         ret = i2c_add_driver(&wm9081_i2c_driver);
1516         if (ret != 0) {
1517                 printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n",
1518                        ret);
1519         }
1520
1521         return ret;
1522 }
1523 module_init(wm9081_modinit);
1524
1525 static void __exit wm9081_exit(void)
1526 {
1527         i2c_del_driver(&wm9081_i2c_driver);
1528 }
1529 module_exit(wm9081_exit);
1530
1531
1532 MODULE_DESCRIPTION("ASoC WM9081 driver");
1533 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1534 MODULE_LICENSE("GPL");