Merge tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel...
[sfrench/cifs-2.6.git] / sound / soc / codecs / tas5086.c
1 /*
2  * TAS5086 ASoC codec driver
3  *
4  * Copyright (c) 2013 Daniel Mack <zonque@gmail.com>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version 2
9  * of the License, or (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * TODO:
17  *  - implement DAPM and input muxing
18  *  - implement modulation limit
19  *  - implement non-default PWM start
20  *
21  * Note that this chip has a very unusual register layout, specifically
22  * because the registers are of unequal size, and multi-byte registers
23  * require bulk writes to take effect. Regmap does not support that kind
24  * of devices.
25  *
26  * Currently, the driver does not touch any of the registers >= 0x20, so
27  * it doesn't matter because the entire map can be accessed as 8-bit
28  * array. In case more features will be added in the future
29  * that require access to higher registers, the entire regmap H/W I/O
30  * routines have to be open-coded.
31  */
32
33 #include <linux/module.h>
34 #include <linux/slab.h>
35 #include <linux/delay.h>
36 #include <linux/gpio.h>
37 #include <linux/i2c.h>
38 #include <linux/regmap.h>
39 #include <linux/regulator/consumer.h>
40 #include <linux/spi/spi.h>
41 #include <linux/of.h>
42 #include <linux/of_device.h>
43 #include <linux/of_gpio.h>
44 #include <sound/pcm.h>
45 #include <sound/pcm_params.h>
46 #include <sound/soc.h>
47 #include <sound/tlv.h>
48 #include <sound/tas5086.h>
49
50 #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE  |         \
51                              SNDRV_PCM_FMTBIT_S20_3LE |         \
52                              SNDRV_PCM_FMTBIT_S24_3LE)
53
54 #define TAS5086_PCM_RATES   (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100  | \
55                              SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200  | \
56                              SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
57                              SNDRV_PCM_RATE_192000)
58
59 /*
60  * TAS5086 registers
61  */
62 #define TAS5086_CLOCK_CONTROL           0x00    /* Clock control register  */
63 #define TAS5086_CLOCK_RATE(val)         (val << 5)
64 #define TAS5086_CLOCK_RATE_MASK         (0x7 << 5)
65 #define TAS5086_CLOCK_RATIO(val)        (val << 2)
66 #define TAS5086_CLOCK_RATIO_MASK        (0x7 << 2)
67 #define TAS5086_CLOCK_SCLK_RATIO_48     (1 << 1)
68 #define TAS5086_CLOCK_VALID             (1 << 0)
69
70 #define TAS5086_DEEMPH_MASK             0x03
71 #define TAS5086_SOFT_MUTE_ALL           0x3f
72
73 #define TAS5086_DEV_ID                  0x01    /* Device ID register */
74 #define TAS5086_ERROR_STATUS            0x02    /* Error status register */
75 #define TAS5086_SYS_CONTROL_1           0x03    /* System control register 1 */
76 #define TAS5086_SERIAL_DATA_IF          0x04    /* Serial data interface register  */
77 #define TAS5086_SYS_CONTROL_2           0x05    /* System control register 2 */
78 #define TAS5086_SOFT_MUTE               0x06    /* Soft mute register */
79 #define TAS5086_MASTER_VOL              0x07    /* Master volume  */
80 #define TAS5086_CHANNEL_VOL(X)          (0x08 + (X))    /* Channel 1-6 volume */
81 #define TAS5086_VOLUME_CONTROL          0x09    /* Volume control register */
82 #define TAS5086_MOD_LIMIT               0x10    /* Modulation limit register */
83 #define TAS5086_PWM_START               0x18    /* PWM start register */
84 #define TAS5086_SURROUND                0x19    /* Surround register */
85 #define TAS5086_SPLIT_CAP_CHARGE        0x1a    /* Split cap charge period register */
86 #define TAS5086_OSC_TRIM                0x1b    /* Oscillator trim register */
87 #define TAS5086_BKNDERR                 0x1c
88 #define TAS5086_INPUT_MUX               0x20
89 #define TAS5086_PWM_OUTPUT_MUX          0x25
90
91 #define TAS5086_MAX_REGISTER            TAS5086_PWM_OUTPUT_MUX
92
93 #define TAS5086_PWM_START_MIDZ_FOR_START_1      (1 << 7)
94 #define TAS5086_PWM_START_MIDZ_FOR_START_2      (1 << 6)
95 #define TAS5086_PWM_START_CHANNEL_MASK          (0x3f)
96
97 /*
98  * Default TAS5086 power-up configuration
99  */
100 static const struct reg_default tas5086_reg_defaults[] = {
101         { 0x00, 0x6c },
102         { 0x01, 0x03 },
103         { 0x02, 0x00 },
104         { 0x03, 0xa0 },
105         { 0x04, 0x05 },
106         { 0x05, 0x60 },
107         { 0x06, 0x00 },
108         { 0x07, 0xff },
109         { 0x08, 0x30 },
110         { 0x09, 0x30 },
111         { 0x0a, 0x30 },
112         { 0x0b, 0x30 },
113         { 0x0c, 0x30 },
114         { 0x0d, 0x30 },
115         { 0x0e, 0xb1 },
116         { 0x0f, 0x00 },
117         { 0x10, 0x02 },
118         { 0x11, 0x00 },
119         { 0x12, 0x00 },
120         { 0x13, 0x00 },
121         { 0x14, 0x00 },
122         { 0x15, 0x00 },
123         { 0x16, 0x00 },
124         { 0x17, 0x00 },
125         { 0x18, 0x3f },
126         { 0x19, 0x00 },
127         { 0x1a, 0x18 },
128         { 0x1b, 0x82 },
129         { 0x1c, 0x05 },
130 };
131
132 static int tas5086_register_size(struct device *dev, unsigned int reg)
133 {
134         switch (reg) {
135         case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
136                 return 1;
137         case TAS5086_INPUT_MUX:
138         case TAS5086_PWM_OUTPUT_MUX:
139                 return 4;
140         }
141
142         dev_err(dev, "Unsupported register address: %d\n", reg);
143         return 0;
144 }
145
146 static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
147 {
148         switch (reg) {
149         case 0x0f:
150         case 0x11 ... 0x17:
151         case 0x1d ... 0x1f:
152                 return false;
153         default:
154                 return true;
155         }
156 }
157
158 static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
159 {
160         switch (reg) {
161         case TAS5086_DEV_ID:
162         case TAS5086_ERROR_STATUS:
163                 return true;
164         }
165
166         return false;
167 }
168
169 static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
170 {
171         return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
172 }
173
174 static int tas5086_reg_write(void *context, unsigned int reg,
175                               unsigned int value)
176 {
177         struct i2c_client *client = context;
178         unsigned int i, size;
179         uint8_t buf[5];
180         int ret;
181
182         size = tas5086_register_size(&client->dev, reg);
183         if (size == 0)
184                 return -EINVAL;
185
186         buf[0] = reg;
187
188         for (i = size; i >= 1; --i) {
189                 buf[i] = value;
190                 value >>= 8;
191         }
192
193         ret = i2c_master_send(client, buf, size + 1);
194         if (ret == size + 1)
195                 return 0;
196         else if (ret < 0)
197                 return ret;
198         else
199                 return -EIO;
200 }
201
202 static int tas5086_reg_read(void *context, unsigned int reg,
203                              unsigned int *value)
204 {
205         struct i2c_client *client = context;
206         uint8_t send_buf, recv_buf[4];
207         struct i2c_msg msgs[2];
208         unsigned int size;
209         unsigned int i;
210         int ret;
211
212         size = tas5086_register_size(&client->dev, reg);
213         if (size == 0)
214                 return -EINVAL;
215
216         send_buf = reg;
217
218         msgs[0].addr = client->addr;
219         msgs[0].len = sizeof(send_buf);
220         msgs[0].buf = &send_buf;
221         msgs[0].flags = 0;
222
223         msgs[1].addr = client->addr;
224         msgs[1].len = size;
225         msgs[1].buf = recv_buf;
226         msgs[1].flags = I2C_M_RD;
227
228         ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
229         if (ret < 0)
230                 return ret;
231         else if (ret != ARRAY_SIZE(msgs))
232                 return -EIO;
233
234         *value = 0;
235
236         for (i = 0; i < size; i++) {
237                 *value <<= 8;
238                 *value |= recv_buf[i];
239         }
240
241         return 0;
242 }
243
244 static const char * const supply_names[] = {
245         "dvdd", "avdd"
246 };
247
248 struct tas5086_private {
249         struct regmap   *regmap;
250         unsigned int    mclk, sclk;
251         unsigned int    format;
252         bool            deemph;
253         unsigned int    charge_period;
254         unsigned int    pwm_start_mid_z;
255         /* Current sample rate for de-emphasis control */
256         int             rate;
257         /* GPIO driving Reset pin, if any */
258         int             gpio_nreset;
259         struct          regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
260 };
261
262 static int tas5086_deemph[] = { 0, 32000, 44100, 48000 };
263
264 static int tas5086_set_deemph(struct snd_soc_codec *codec)
265 {
266         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
267         int i, val = 0;
268
269         if (priv->deemph)
270                 for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++)
271                         if (tas5086_deemph[i] == priv->rate)
272                                 val = i;
273
274         return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1,
275                                   TAS5086_DEEMPH_MASK, val);
276 }
277
278 static int tas5086_get_deemph(struct snd_kcontrol *kcontrol,
279                               struct snd_ctl_elem_value *ucontrol)
280 {
281         struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
282         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
283
284         ucontrol->value.integer.value[0] = priv->deemph;
285
286         return 0;
287 }
288
289 static int tas5086_put_deemph(struct snd_kcontrol *kcontrol,
290                               struct snd_ctl_elem_value *ucontrol)
291 {
292         struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
293         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
294
295         priv->deemph = ucontrol->value.integer.value[0];
296
297         return tas5086_set_deemph(codec);
298 }
299
300
301 static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai,
302                                   int clk_id, unsigned int freq, int dir)
303 {
304         struct snd_soc_codec *codec = codec_dai->codec;
305         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
306
307         switch (clk_id) {
308         case TAS5086_CLK_IDX_MCLK:
309                 priv->mclk = freq;
310                 break;
311         case TAS5086_CLK_IDX_SCLK:
312                 priv->sclk = freq;
313                 break;
314         }
315
316         return 0;
317 }
318
319 static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai,
320                                unsigned int format)
321 {
322         struct snd_soc_codec *codec = codec_dai->codec;
323         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
324
325         /* The TAS5086 can only be slave to all clocks */
326         if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
327                 dev_err(codec->dev, "Invalid clocking mode\n");
328                 return -EINVAL;
329         }
330
331         /* we need to refer to the data format from hw_params() */
332         priv->format = format;
333
334         return 0;
335 }
336
337 static const int tas5086_sample_rates[] = {
338         32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000
339 };
340
341 static const int tas5086_ratios[] = {
342         64, 128, 192, 256, 384, 512
343 };
344
345 static int index_in_array(const int *array, int len, int needle)
346 {
347         int i;
348
349         for (i = 0; i < len; i++)
350                 if (array[i] == needle)
351                         return i;
352
353         return -ENOENT;
354 }
355
356 static int tas5086_hw_params(struct snd_pcm_substream *substream,
357                              struct snd_pcm_hw_params *params,
358                              struct snd_soc_dai *dai)
359 {
360         struct snd_soc_codec *codec = dai->codec;
361         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
362         int val;
363         int ret;
364
365         priv->rate = params_rate(params);
366
367         /* Look up the sample rate and refer to the offset in the list */
368         val = index_in_array(tas5086_sample_rates,
369                              ARRAY_SIZE(tas5086_sample_rates), priv->rate);
370
371         if (val < 0) {
372                 dev_err(codec->dev, "Invalid sample rate\n");
373                 return -EINVAL;
374         }
375
376         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
377                                  TAS5086_CLOCK_RATE_MASK,
378                                  TAS5086_CLOCK_RATE(val));
379         if (ret < 0)
380                 return ret;
381
382         /* MCLK / Fs ratio */
383         val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios),
384                              priv->mclk / priv->rate);
385         if (val < 0) {
386                 dev_err(codec->dev, "Inavlid MCLK / Fs ratio\n");
387                 return -EINVAL;
388         }
389
390         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
391                                  TAS5086_CLOCK_RATIO_MASK,
392                                  TAS5086_CLOCK_RATIO(val));
393         if (ret < 0)
394                 return ret;
395
396
397         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
398                                  TAS5086_CLOCK_SCLK_RATIO_48,
399                                  (priv->sclk == 48 * priv->rate) ? 
400                                         TAS5086_CLOCK_SCLK_RATIO_48 : 0);
401         if (ret < 0)
402                 return ret;
403
404         /*
405          * The chip has a very unituitive register mapping and muxes information
406          * about data format and sample depth into the same register, but not on
407          * a logical bit-boundary. Hence, we have to refer to the format passed
408          * in the set_dai_fmt() callback and set up everything from here.
409          *
410          * First, determine the 'base' value, using the format ...
411          */
412         switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
413         case SND_SOC_DAIFMT_RIGHT_J:
414                 val = 0x00;
415                 break;
416         case SND_SOC_DAIFMT_I2S:
417                 val = 0x03;
418                 break;
419         case SND_SOC_DAIFMT_LEFT_J:
420                 val = 0x06;
421                 break;
422         default:
423                 dev_err(codec->dev, "Invalid DAI format\n");
424                 return -EINVAL;
425         }
426
427         /* ... then add the offset for the sample bit depth. */
428         switch (params_width(params)) {
429         case 16:
430                 val += 0;
431                 break;
432         case 20:
433                 val += 1;
434                 break;
435         case 24:
436                 val += 2;
437                 break;
438         default:
439                 dev_err(codec->dev, "Invalid bit width\n");
440                 return -EINVAL;
441         }
442
443         ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val);
444         if (ret < 0)
445                 return ret;
446
447         /* clock is considered valid now */
448         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
449                                  TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID);
450         if (ret < 0)
451                 return ret;
452
453         return tas5086_set_deemph(codec);
454 }
455
456 static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
457 {
458         struct snd_soc_codec *codec = dai->codec;
459         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
460         unsigned int val = 0;
461
462         if (mute)
463                 val = TAS5086_SOFT_MUTE_ALL;
464
465         return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val);
466 }
467
468 static void tas5086_reset(struct tas5086_private *priv)
469 {
470         if (gpio_is_valid(priv->gpio_nreset)) {
471                 /* Reset codec - minimum assertion time is 400ns */
472                 gpio_direction_output(priv->gpio_nreset, 0);
473                 udelay(1);
474                 gpio_set_value(priv->gpio_nreset, 1);
475
476                 /* Codec needs ~15ms to wake up */
477                 msleep(15);
478         }
479 }
480
481 /* charge period values in microseconds */
482 static const int tas5086_charge_period[] = {
483           13000,  16900,   23400,   31200,   41600,   54600,   72800,   96200,
484          130000, 156000,  234000,  312000,  416000,  546000,  728000,  962000,
485         1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000,
486 };
487
488 static int tas5086_init(struct device *dev, struct tas5086_private *priv)
489 {
490         int ret, i;
491
492         /*
493          * If any of the channels is configured to start in Mid-Z mode,
494          * configure 'part 1' of the PWM starts to use Mid-Z, and tell
495          * all configured mid-z channels to start start under 'part 1'.
496          */
497         if (priv->pwm_start_mid_z)
498                 regmap_write(priv->regmap, TAS5086_PWM_START,
499                              TAS5086_PWM_START_MIDZ_FOR_START_1 |
500                                 priv->pwm_start_mid_z);
501
502         /* lookup and set split-capacitor charge period */
503         if (priv->charge_period == 0) {
504                 regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
505         } else {
506                 i = index_in_array(tas5086_charge_period,
507                                    ARRAY_SIZE(tas5086_charge_period),
508                                    priv->charge_period);
509                 if (i >= 0)
510                         regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE,
511                                      i + 0x08);
512                 else
513                         dev_warn(dev,
514                                  "Invalid split-cap charge period of %d ns.\n",
515                                  priv->charge_period);
516         }
517
518         /* enable factory trim */
519         ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00);
520         if (ret < 0)
521                 return ret;
522
523         /* start all channels */
524         ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20);
525         if (ret < 0)
526                 return ret;
527
528         /* mute all channels for now */
529         ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE,
530                            TAS5086_SOFT_MUTE_ALL);
531         if (ret < 0)
532                 return ret;
533
534         return 0;
535 }
536
537 /* TAS5086 controls */
538 static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1);
539
540 static const struct snd_kcontrol_new tas5086_controls[] = {
541         SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL,
542                        0, 0xff, 1, tas5086_dac_tlv),
543         SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume",
544                          TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1),
545                          0, 0xff, 1, tas5086_dac_tlv),
546         SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume",
547                          TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3),
548                          0, 0xff, 1, tas5086_dac_tlv),
549         SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume",
550                          TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5),
551                          0, 0xff, 1, tas5086_dac_tlv),
552         SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0,
553                             tas5086_get_deemph, tas5086_put_deemph),
554 };
555
556 /* Input mux controls */
557 static const char *tas5086_dapm_sdin_texts[] =
558 {
559         "SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
560         "SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
561 };
562
563 static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
564         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
565         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
566         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
567         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8,  8, tas5086_dapm_sdin_texts),
568         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4,  8, tas5086_dapm_sdin_texts),
569         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0,  8, tas5086_dapm_sdin_texts),
570 };
571
572 static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
573         SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
574         SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
575         SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
576         SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
577         SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
578         SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
579 };
580
581 /* Output mux controls */
582 static const char *tas5086_dapm_channel_texts[] =
583         { "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
584           "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };
585
586 static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
587         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
588         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
589         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
590         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8,  6, tas5086_dapm_channel_texts),
591         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4,  6, tas5086_dapm_channel_texts),
592         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0,  6, tas5086_dapm_channel_texts),
593 };
594
595 static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
596         SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
597         SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
598         SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
599         SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
600         SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
601         SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
602 };
603
604 static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
605         SND_SOC_DAPM_INPUT("SDIN1-L"),
606         SND_SOC_DAPM_INPUT("SDIN1-R"),
607         SND_SOC_DAPM_INPUT("SDIN2-L"),
608         SND_SOC_DAPM_INPUT("SDIN2-R"),
609         SND_SOC_DAPM_INPUT("SDIN3-L"),
610         SND_SOC_DAPM_INPUT("SDIN3-R"),
611         SND_SOC_DAPM_INPUT("SDIN4-L"),
612         SND_SOC_DAPM_INPUT("SDIN4-R"),
613
614         SND_SOC_DAPM_OUTPUT("PWM1"),
615         SND_SOC_DAPM_OUTPUT("PWM2"),
616         SND_SOC_DAPM_OUTPUT("PWM3"),
617         SND_SOC_DAPM_OUTPUT("PWM4"),
618         SND_SOC_DAPM_OUTPUT("PWM5"),
619         SND_SOC_DAPM_OUTPUT("PWM6"),
620
621         SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
622                          &tas5086_dapm_input_mux_controls[0]),
623         SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
624                          &tas5086_dapm_input_mux_controls[1]),
625         SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
626                          &tas5086_dapm_input_mux_controls[2]),
627         SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
628                          &tas5086_dapm_input_mux_controls[3]),
629         SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
630                          &tas5086_dapm_input_mux_controls[4]),
631         SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
632                          &tas5086_dapm_input_mux_controls[5]),
633
634         SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
635                          &tas5086_dapm_output_mux_controls[0]),
636         SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
637                          &tas5086_dapm_output_mux_controls[1]),
638         SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
639                          &tas5086_dapm_output_mux_controls[2]),
640         SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
641                          &tas5086_dapm_output_mux_controls[3]),
642         SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
643                          &tas5086_dapm_output_mux_controls[4]),
644         SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
645                          &tas5086_dapm_output_mux_controls[5]),
646 };
647
648 static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
649         /* SDIN inputs -> channel muxes */
650         { "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
651         { "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
652         { "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
653         { "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
654         { "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
655         { "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },
656
657         { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
658         { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
659         { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
660         { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
661         { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
662         { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
663
664         { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
665         { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
666         { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
667         { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
668         { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
669         { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
670
671         { "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
672         { "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
673         { "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
674         { "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
675         { "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
676         { "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },
677
678         { "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
679         { "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
680         { "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
681         { "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
682         { "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
683         { "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },
684
685         { "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
686         { "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
687         { "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
688         { "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
689         { "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
690         { "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },
691
692         { "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
693         { "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
694         { "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
695         { "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
696         { "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
697         { "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },
698
699         /* Channel muxes -> PWM muxes */
700         { "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
701         { "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
702         { "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
703         { "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
704         { "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
705         { "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },
706
707         { "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
708         { "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
709         { "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
710         { "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
711         { "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
712         { "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },
713
714         { "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
715         { "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
716         { "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
717         { "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
718         { "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
719         { "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },
720
721         { "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
722         { "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
723         { "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
724         { "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
725         { "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
726         { "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },
727
728         { "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
729         { "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
730         { "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
731         { "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
732         { "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
733         { "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },
734
735         { "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
736         { "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
737         { "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
738         { "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
739         { "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
740         { "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },
741
742         /* The PWM muxes are directly connected to the PWM outputs */
743         { "PWM1", NULL, "PWM1 Mux" },
744         { "PWM2", NULL, "PWM2 Mux" },
745         { "PWM3", NULL, "PWM3 Mux" },
746         { "PWM4", NULL, "PWM4 Mux" },
747         { "PWM5", NULL, "PWM5 Mux" },
748         { "PWM6", NULL, "PWM6 Mux" },
749
750 };
751
752 static const struct snd_soc_dai_ops tas5086_dai_ops = {
753         .hw_params      = tas5086_hw_params,
754         .set_sysclk     = tas5086_set_dai_sysclk,
755         .set_fmt        = tas5086_set_dai_fmt,
756         .mute_stream    = tas5086_mute_stream,
757 };
758
759 static struct snd_soc_dai_driver tas5086_dai = {
760         .name = "tas5086-hifi",
761         .playback = {
762                 .stream_name    = "Playback",
763                 .channels_min   = 2,
764                 .channels_max   = 6,
765                 .rates          = TAS5086_PCM_RATES,
766                 .formats        = TAS5086_PCM_FORMATS,
767         },
768         .ops = &tas5086_dai_ops,
769 };
770
771 #ifdef CONFIG_PM
772 static int tas5086_soc_suspend(struct snd_soc_codec *codec)
773 {
774         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
775         int ret;
776
777         /* Shut down all channels */
778         ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60);
779         if (ret < 0)
780                 return ret;
781
782         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
783
784         return 0;
785 }
786
787 static int tas5086_soc_resume(struct snd_soc_codec *codec)
788 {
789         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
790         int ret;
791
792         ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
793         if (ret < 0)
794                 return ret;
795
796         tas5086_reset(priv);
797         regcache_mark_dirty(priv->regmap);
798
799         ret = tas5086_init(codec->dev, priv);
800         if (ret < 0)
801                 return ret;
802
803         ret = regcache_sync(priv->regmap);
804         if (ret < 0)
805                 return ret;
806
807         return 0;
808 }
809 #else
810 #define tas5086_soc_suspend     NULL
811 #define tas5086_soc_resume      NULL
812 #endif /* CONFIG_PM */
813
814 #ifdef CONFIG_OF
815 static const struct of_device_id tas5086_dt_ids[] = {
816         { .compatible = "ti,tas5086", },
817         { }
818 };
819 MODULE_DEVICE_TABLE(of, tas5086_dt_ids);
820 #endif
821
822 static int tas5086_probe(struct snd_soc_codec *codec)
823 {
824         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
825         int i, ret;
826
827         ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
828         if (ret < 0) {
829                 dev_err(codec->dev, "Failed to enable regulators: %d\n", ret);
830                 return ret;
831         }
832
833         priv->pwm_start_mid_z = 0;
834         priv->charge_period = 1300000; /* hardware default is 1300 ms */
835
836         if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) {
837                 struct device_node *of_node = codec->dev->of_node;
838
839                 of_property_read_u32(of_node, "ti,charge-period",
840                                      &priv->charge_period);
841
842                 for (i = 0; i < 6; i++) {
843                         char name[25];
844
845                         snprintf(name, sizeof(name),
846                                  "ti,mid-z-channel-%d", i + 1);
847
848                         if (of_get_property(of_node, name, NULL) != NULL)
849                                 priv->pwm_start_mid_z |= 1 << i;
850                 }
851         }
852
853         tas5086_reset(priv);
854         ret = tas5086_init(codec->dev, priv);
855         if (ret < 0)
856                 goto exit_disable_regulators;
857
858         /* set master volume to 0 dB */
859         ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30);
860         if (ret < 0)
861                 goto exit_disable_regulators;
862
863         return 0;
864
865 exit_disable_regulators:
866         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
867
868         return ret;
869 }
870
871 static int tas5086_remove(struct snd_soc_codec *codec)
872 {
873         struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
874
875         if (gpio_is_valid(priv->gpio_nreset))
876                 /* Set codec to the reset state */
877                 gpio_set_value(priv->gpio_nreset, 0);
878
879         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
880
881         return 0;
882 };
883
884 static struct snd_soc_codec_driver soc_codec_dev_tas5086 = {
885         .probe                  = tas5086_probe,
886         .remove                 = tas5086_remove,
887         .suspend                = tas5086_soc_suspend,
888         .resume                 = tas5086_soc_resume,
889         .controls               = tas5086_controls,
890         .num_controls           = ARRAY_SIZE(tas5086_controls),
891         .dapm_widgets           = tas5086_dapm_widgets,
892         .num_dapm_widgets       = ARRAY_SIZE(tas5086_dapm_widgets),
893         .dapm_routes            = tas5086_dapm_routes,
894         .num_dapm_routes        = ARRAY_SIZE(tas5086_dapm_routes),
895 };
896
897 static const struct i2c_device_id tas5086_i2c_id[] = {
898         { "tas5086", 0 },
899         { }
900 };
901 MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);
902
903 static const struct regmap_config tas5086_regmap = {
904         .reg_bits               = 8,
905         .val_bits               = 32,
906         .max_register           = TAS5086_MAX_REGISTER,
907         .reg_defaults           = tas5086_reg_defaults,
908         .num_reg_defaults       = ARRAY_SIZE(tas5086_reg_defaults),
909         .cache_type             = REGCACHE_RBTREE,
910         .volatile_reg           = tas5086_volatile_reg,
911         .writeable_reg          = tas5086_writeable_reg,
912         .readable_reg           = tas5086_accessible_reg,
913         .reg_read               = tas5086_reg_read,
914         .reg_write              = tas5086_reg_write,
915 };
916
917 static int tas5086_i2c_probe(struct i2c_client *i2c,
918                              const struct i2c_device_id *id)
919 {
920         struct tas5086_private *priv;
921         struct device *dev = &i2c->dev;
922         int gpio_nreset = -EINVAL;
923         int i, ret;
924
925         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
926         if (!priv)
927                 return -ENOMEM;
928
929         for (i = 0; i < ARRAY_SIZE(supply_names); i++)
930                 priv->supplies[i].supply = supply_names[i];
931
932         ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
933                                       priv->supplies);
934         if (ret < 0) {
935                 dev_err(dev, "Failed to get regulators: %d\n", ret);
936                 return ret;
937         }
938
939         priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
940         if (IS_ERR(priv->regmap)) {
941                 ret = PTR_ERR(priv->regmap);
942                 dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
943                 return ret;
944         }
945
946         i2c_set_clientdata(i2c, priv);
947
948         if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) {
949                 struct device_node *of_node = dev->of_node;
950                 gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0);
951         }
952
953         if (gpio_is_valid(gpio_nreset))
954                 if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset"))
955                         gpio_nreset = -EINVAL;
956
957         priv->gpio_nreset = gpio_nreset;
958
959         ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
960         if (ret < 0) {
961                 dev_err(dev, "Failed to enable regulators: %d\n", ret);
962                 return ret;
963         }
964
965         tas5086_reset(priv);
966
967         /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */
968         ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i);
969         if (ret == 0 && i != 0x3) {
970                 dev_err(dev,
971                         "Failed to identify TAS5086 codec (got %02x)\n", i);
972                 ret = -ENODEV;
973         }
974
975         /*
976          * The chip has been identified, so we can turn off the power
977          * again until the dai link is set up.
978          */
979         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
980
981         if (ret == 0)
982                 ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086,
983                                              &tas5086_dai, 1);
984
985         return ret;
986 }
987
988 static int tas5086_i2c_remove(struct i2c_client *i2c)
989 {
990         snd_soc_unregister_codec(&i2c->dev);
991         return 0;
992 }
993
994 static struct i2c_driver tas5086_i2c_driver = {
995         .driver = {
996                 .name   = "tas5086",
997                 .owner  = THIS_MODULE,
998                 .of_match_table = of_match_ptr(tas5086_dt_ids),
999         },
1000         .id_table       = tas5086_i2c_id,
1001         .probe          = tas5086_i2c_probe,
1002         .remove         = tas5086_i2c_remove,
1003 };
1004
1005 module_i2c_driver(tas5086_i2c_driver);
1006
1007 MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>");
1008 MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver");
1009 MODULE_LICENSE("GPL");