ASoC: rt5665: fix wrong register for bclk ratio control
[sfrench/cifs-2.6.git] / sound / soc / codecs / l3.c
1 /*
2  * L3 code
3  *
4  *  Copyright (C) 2008, Christian Pellegrin <chripell@evolware.org>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  *
11  * based on:
12  *
13  * L3 bus algorithm module.
14  *
15  *  Copyright (C) 2001 Russell King, All Rights Reserved.
16  *
17  *
18  */
19
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/delay.h>
23 #include <linux/device.h>
24 #include <linux/gpio.h>
25
26 #include <sound/l3.h>
27
28 /*
29  * Send one byte of data to the chip.  Data is latched into the chip on
30  * the rising edge of the clock.
31  */
32 static void sendbyte(struct l3_pins *adap, unsigned int byte)
33 {
34         int i;
35
36         for (i = 0; i < 8; i++) {
37                 adap->setclk(adap, 0);
38                 udelay(adap->data_hold);
39                 adap->setdat(adap, byte & 1);
40                 udelay(adap->data_setup);
41                 adap->setclk(adap, 1);
42                 udelay(adap->clock_high);
43                 byte >>= 1;
44         }
45 }
46
47 /*
48  * Send a set of bytes to the chip.  We need to pulse the MODE line
49  * between each byte, but never at the start nor at the end of the
50  * transfer.
51  */
52 static void sendbytes(struct l3_pins *adap, const u8 *buf,
53                       int len)
54 {
55         int i;
56
57         for (i = 0; i < len; i++) {
58                 if (i) {
59                         udelay(adap->mode_hold);
60                         adap->setmode(adap, 0);
61                         udelay(adap->mode);
62                 }
63                 adap->setmode(adap, 1);
64                 udelay(adap->mode_setup);
65                 sendbyte(adap, buf[i]);
66         }
67 }
68
69 int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len)
70 {
71         adap->setclk(adap, 1);
72         adap->setdat(adap, 1);
73         adap->setmode(adap, 1);
74         udelay(adap->mode);
75
76         adap->setmode(adap, 0);
77         udelay(adap->mode_setup);
78         sendbyte(adap, addr);
79         udelay(adap->mode_hold);
80
81         sendbytes(adap, data, len);
82
83         adap->setclk(adap, 1);
84         adap->setdat(adap, 1);
85         adap->setmode(adap, 0);
86
87         return len;
88 }
89 EXPORT_SYMBOL_GPL(l3_write);
90
91
92 static void l3_set_clk(struct l3_pins *adap, int val)
93 {
94         gpio_set_value(adap->gpio_clk, val);
95 }
96
97 static void l3_set_data(struct l3_pins *adap, int val)
98 {
99         gpio_set_value(adap->gpio_data, val);
100 }
101
102 static void l3_set_mode(struct l3_pins *adap, int val)
103 {
104         gpio_set_value(adap->gpio_mode, val);
105 }
106
107 int l3_set_gpio_ops(struct device *dev, struct l3_pins *adap)
108 {
109         int ret;
110
111         if (!adap->use_gpios)
112                 return -EINVAL;
113
114         ret = devm_gpio_request_one(dev, adap->gpio_data,
115                                 GPIOF_OUT_INIT_LOW, "l3_data");
116         if (ret < 0)
117                 return ret;
118         adap->setdat = l3_set_data;
119
120         ret = devm_gpio_request_one(dev, adap->gpio_clk,
121                                 GPIOF_OUT_INIT_LOW, "l3_clk");
122         if (ret < 0)
123                 return ret;
124         adap->setclk = l3_set_clk;
125
126         ret = devm_gpio_request_one(dev, adap->gpio_mode,
127                                 GPIOF_OUT_INIT_LOW, "l3_mode");
128         if (ret < 0)
129                 return ret;
130         adap->setmode = l3_set_mode;
131
132         return 0;
133 }
134 EXPORT_SYMBOL_GPL(l3_set_gpio_ops);
135
136 MODULE_DESCRIPTION("L3 bit-banging driver");
137 MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
138 MODULE_LICENSE("GPL");