Merge tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
[sfrench/cifs-2.6.git] / scripts / Makefile.build
1 # SPDX-License-Identifier: GPL-2.0
2 # ==========================================================================
3 # Building
4 # ==========================================================================
5
6 src := $(obj)
7
8 PHONY := __build
9 __build:
10
11 # Init all relevant variables used in kbuild files so
12 # 1) they have correct type
13 # 2) they do not inherit any value from the environment
14 obj-y :=
15 obj-m :=
16 lib-y :=
17 lib-m :=
18 always :=
19 targets :=
20 subdir-y :=
21 subdir-m :=
22 EXTRA_AFLAGS   :=
23 EXTRA_CFLAGS   :=
24 EXTRA_CPPFLAGS :=
25 EXTRA_LDFLAGS  :=
26 asflags-y  :=
27 ccflags-y  :=
28 cppflags-y :=
29 ldflags-y  :=
30
31 subdir-asflags-y :=
32 subdir-ccflags-y :=
33
34 # Read auto.conf if it exists, otherwise ignore
35 -include include/config/auto.conf
36
37 include scripts/Kbuild.include
38
39 # For backward compatibility check that these variables do not change
40 save-cflags := $(CFLAGS)
41
42 # The filename Kbuild has precedence over Makefile
43 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
44 kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
45 include $(kbuild-file)
46
47 # If the save-* variables changed error out
48 ifeq ($(KBUILD_NOPEDANTIC),)
49         ifneq ("$(save-cflags)","$(CFLAGS)")
50                 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
51         endif
52 endif
53
54 include scripts/Makefile.lib
55
56 ifdef host-progs
57 ifneq ($(hostprogs-y),$(host-progs))
58 $(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
59 hostprogs-y += $(host-progs)
60 endif
61 endif
62
63 # Do not include host rules unless needed
64 ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
65 include scripts/Makefile.host
66 endif
67
68 ifndef obj
69 $(warning kbuild: Makefile.build is included improperly)
70 endif
71
72 # ===========================================================================
73
74 ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
75 lib-target := $(obj)/lib.a
76 real-obj-y += $(obj)/lib-ksyms.o
77 endif
78
79 ifneq ($(strip $(real-obj-y) $(need-builtin)),)
80 builtin-target := $(obj)/built-in.a
81 endif
82
83 modorder-target := $(obj)/modules.order
84
85 # We keep a list of all modules in $(MODVERDIR)
86
87 __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
88          $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
89          $(subdir-ym) $(always)
90         @:
91
92 # Linus' kernel sanity checking tool
93 ifneq ($(KBUILD_CHECKSRC),0)
94   ifeq ($(KBUILD_CHECKSRC),2)
95     quiet_cmd_force_checksrc = CHECK   $<
96           cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
97   else
98       quiet_cmd_checksrc     = CHECK   $<
99             cmd_checksrc     = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
100   endif
101 endif
102
103 ifneq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),)
104   cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $< ;
105 endif
106
107 # Do section mismatch analysis for each module/built-in.a
108 ifdef CONFIG_DEBUG_SECTION_MISMATCH
109   cmd_secanalysis = ; scripts/mod/modpost $@
110 endif
111
112 # Compile C sources (.c)
113 # ---------------------------------------------------------------------------
114
115 # Default is built-in, unless we know otherwise
116 modkern_cflags =                                          \
117         $(if $(part-of-module),                           \
118                 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
119                 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
120 quiet_modtag := $(empty)   $(empty)
121
122 $(real-obj-m)        : part-of-module := y
123 $(real-obj-m:.o=.i)  : part-of-module := y
124 $(real-obj-m:.o=.s)  : part-of-module := y
125 $(real-obj-m:.o=.lst): part-of-module := y
126
127 $(real-obj-m)        : quiet_modtag := [M]
128 $(real-obj-m:.o=.i)  : quiet_modtag := [M]
129 $(real-obj-m:.o=.s)  : quiet_modtag := [M]
130 $(real-obj-m:.o=.lst): quiet_modtag := [M]
131
132 $(obj-m)             : quiet_modtag := [M]
133
134 quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
135 cmd_cc_s_c       = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
136
137 $(obj)/%.s: $(src)/%.c FORCE
138         $(call if_changed_dep,cc_s_c)
139
140 quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
141 cmd_cpp_i_c       = $(CPP) $(c_flags) -o $@ $<
142
143 $(obj)/%.i: $(src)/%.c FORCE
144         $(call if_changed_dep,cpp_i_c)
145
146 # These mirror gensymtypes_S and co below, keep them in synch.
147 cmd_gensymtypes_c =                                                         \
148     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
149     $(GENKSYMS) $(if $(1), -T $(2))                                         \
150      $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))             \
151      $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
152      $(if $(KBUILD_PRESERVE),-p)                                            \
153      -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
154
155 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
156 cmd_cc_symtypes_c =                                                         \
157     set -e;                                                                 \
158     $(call cmd_gensymtypes_c,true,$@) >/dev/null;                           \
159     test -s $@ || rm -f $@
160
161 $(obj)/%.symtypes : $(src)/%.c FORCE
162         $(call cmd,cc_symtypes_c)
163
164 # LLVM assembly
165 # Generate .ll files from .c
166 quiet_cmd_cc_ll_c = CC $(quiet_modtag)  $@
167       cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $<
168
169 $(obj)/%.ll: $(src)/%.c FORCE
170         $(call if_changed_dep,cc_ll_c)
171
172 # C (.c) files
173 # The C file is compiled and updated dependency information is generated.
174 # (See cmd_cc_o_c + relevant part of rule_cc_o_c)
175
176 quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
177
178 ifndef CONFIG_MODVERSIONS
179 cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
180
181 else
182 # When module versioning is enabled the following steps are executed:
183 # o compile a .tmp_<file>.o from <file>.c
184 # o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
185 #   not export symbols, we just rename .tmp_<file>.o to <file>.o and
186 #   are done.
187 # o otherwise, we calculate symbol versions using the good old
188 #   genksyms on the preprocessed source and postprocess them in a way
189 #   that they are usable as a linker script
190 # o generate <file>.o from .tmp_<file>.o using the linker to
191 #   replace the unresolved symbols __crc_exported_symbol with
192 #   the actual value of the checksum generated by genksyms
193
194 cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
195
196 cmd_modversions_c =                                                             \
197         if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then             \
198                 $(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))  \
199                     > $(@D)/.tmp_$(@F:.o=.ver);                                 \
200                                                                                 \
201                 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)                      \
202                         -T $(@D)/.tmp_$(@F:.o=.ver);                            \
203                 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);                \
204         else                                                                    \
205                 mv -f $(@D)/.tmp_$(@F) $@;                                      \
206         fi;
207 endif
208
209 ifdef CONFIG_FTRACE_MCOUNT_RECORD
210 ifdef BUILD_C_RECORDMCOUNT
211 ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
212   RECORDMCOUNT_FLAGS = -w
213 endif
214 # Due to recursion, we must skip empty.o.
215 # The empty.o file is created in the make process in order to determine
216 # the target endianness and word size. It is made before all other C
217 # files, including recordmcount.
218 sub_cmd_record_mcount =                                 \
219         if [ $(@) != "scripts/mod/empty.o" ]; then      \
220                 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";   \
221         fi;
222 recordmcount_source := $(srctree)/scripts/recordmcount.c \
223                     $(srctree)/scripts/recordmcount.h
224 else
225 sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
226         "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
227         "$(if $(CONFIG_64BIT),64,32)" \
228         "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
229         "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
230         "$(if $(part-of-module),1,0)" "$(@)";
231 recordmcount_source := $(srctree)/scripts/recordmcount.pl
232 endif # BUILD_C_RECORDMCOUNT
233 cmd_record_mcount =                                             \
234         if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" =   \
235              "$(CC_FLAGS_FTRACE)" ]; then                       \
236                 $(sub_cmd_record_mcount)                        \
237         fi;
238 endif # CONFIG_FTRACE_MCOUNT_RECORD
239
240 ifdef CONFIG_STACK_VALIDATION
241 ifneq ($(SKIP_STACK_VALIDATION),1)
242
243 __objtool_obj := $(objtree)/tools/objtool/objtool
244
245 objtool_args = $(if $(CONFIG_UNWINDER_ORC),orc generate,check)
246
247 objtool_args += $(if $(part-of-module), --module,)
248
249 ifndef CONFIG_FRAME_POINTER
250 objtool_args += --no-fp
251 endif
252 ifdef CONFIG_GCOV_KERNEL
253 objtool_args += --no-unreachable
254 else
255 objtool_args += $(call cc-ifversion, -lt, 0405, --no-unreachable)
256 endif
257 ifdef CONFIG_RETPOLINE
258 ifneq ($(RETPOLINE_CFLAGS),)
259   objtool_args += --retpoline
260 endif
261 endif
262
263
264 ifdef CONFIG_MODVERSIONS
265 objtool_o = $(@D)/.tmp_$(@F)
266 else
267 objtool_o = $(@)
268 endif
269
270 # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
271 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
272 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
273 cmd_objtool = $(if $(patsubst y%,, \
274         $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
275         $(__objtool_obj) $(objtool_args) "$(objtool_o)";)
276 objtool_obj = $(if $(patsubst y%,, \
277         $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
278         $(__objtool_obj))
279
280 endif # SKIP_STACK_VALIDATION
281 endif # CONFIG_STACK_VALIDATION
282
283 # Rebuild all objects when objtool changes, or is enabled/disabled.
284 objtool_dep = $(objtool_obj)                                    \
285               $(wildcard include/config/orc/unwinder.h          \
286                          include/config/stack/validation.h)
287
288 define rule_cc_o_c
289         $(call echo-cmd,checksrc) $(cmd_checksrc)                         \
290         $(call cmd_and_fixdep,cc_o_c)                                     \
291         $(cmd_checkdoc)                                                   \
292         $(call echo-cmd,objtool) $(cmd_objtool)                           \
293         $(cmd_modversions_c)                                              \
294         $(call echo-cmd,record_mcount) $(cmd_record_mcount)
295 endef
296
297 define rule_as_o_S
298         $(call cmd_and_fixdep,as_o_S)                                     \
299         $(call echo-cmd,objtool) $(cmd_objtool)                           \
300         $(cmd_modversions_S)
301 endef
302
303 # List module undefined symbols (or empty line if not enabled)
304 ifdef CONFIG_TRIM_UNUSED_KSYMS
305 cmd_undef_syms = $(NM) $@ | sed -n 's/^  *U //p' | xargs echo
306 else
307 cmd_undef_syms = echo
308 endif
309
310 # Built-in and composite module parts
311 $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
312         $(call cmd,force_checksrc)
313         $(call if_changed_rule,cc_o_c)
314
315 # Single-part modules are special since we need to mark them in $(MODVERDIR)
316
317 $(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
318         $(call cmd,force_checksrc)
319         $(call if_changed_rule,cc_o_c)
320         @{ echo $(@:.o=.ko); echo $@; \
321            $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
322
323 quiet_cmd_cc_lst_c = MKLST   $@
324       cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
325                      $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
326                                      System.map $(OBJDUMP) > $@
327
328 $(obj)/%.lst: $(src)/%.c FORCE
329         $(call if_changed_dep,cc_lst_c)
330
331 # Compile assembler sources (.S)
332 # ---------------------------------------------------------------------------
333
334 modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
335
336 $(real-obj-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
337 $(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
338
339 # .S file exports must have their C prototypes defined in asm/asm-prototypes.h
340 # or a file that it includes, in order to get versioned symbols. We build a
341 # dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
342 # the .S file (with trailing ';'), and run genksyms on that, to extract vers.
343 #
344 # This is convoluted. The .S file must first be preprocessed to run guards and
345 # expand names, then the resulting exports must be constructed into plain
346 # EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
347 # to make the genksyms input.
348 #
349 # These mirror gensymtypes_c and co above, keep them in synch.
350 cmd_gensymtypes_S =                                                         \
351     (echo "\#include <linux/kernel.h>" ;                                    \
352      echo "\#include <asm/asm-prototypes.h>" ;                              \
353     $(CPP) $(a_flags) $< |                                                  \
354      grep "\<___EXPORT_SYMBOL\>" |                                          \
355      sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \
356     $(CPP) -D__GENKSYMS__ $(c_flags) -xc - |                                \
357     $(GENKSYMS) $(if $(1), -T $(2))                                         \
358      $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))             \
359      $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
360      $(if $(KBUILD_PRESERVE),-p)                                            \
361      -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
362
363 quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
364 cmd_cc_symtypes_S =                                                         \
365     set -e;                                                                 \
366     $(call cmd_gensymtypes_S,true,$@) >/dev/null;                           \
367     test -s $@ || rm -f $@
368
369 $(obj)/%.symtypes : $(src)/%.S FORCE
370         $(call cmd,cc_symtypes_S)
371
372
373 quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
374 cmd_cpp_s_S       = $(CPP) $(a_flags) -o $@ $<
375
376 $(obj)/%.s: $(src)/%.S FORCE
377         $(call if_changed_dep,cpp_s_S)
378
379 quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
380
381 ifndef CONFIG_MODVERSIONS
382 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
383
384 else
385
386 ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h)
387
388 ifeq ($(ASM_PROTOTYPES),)
389 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
390
391 else
392
393 # versioning matches the C process described above, with difference that
394 # we parse asm-prototypes.h C header to get function definitions.
395
396 cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $<
397
398 cmd_modversions_S =                                                             \
399         if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then             \
400                 $(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))  \
401                     > $(@D)/.tmp_$(@F:.o=.ver);                                 \
402                                                                                 \
403                 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)                      \
404                         -T $(@D)/.tmp_$(@F:.o=.ver);                            \
405                 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);                \
406         else                                                                    \
407                 mv -f $(@D)/.tmp_$(@F) $@;                                      \
408         fi;
409 endif
410 endif
411
412 $(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE
413         $(call if_changed_rule,as_o_S)
414
415 targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
416 targets += $(extra-y) $(MAKECMDGOALS) $(always)
417
418 # Linker scripts preprocessor (.lds.S -> .lds)
419 # ---------------------------------------------------------------------------
420 quiet_cmd_cpp_lds_S = LDS     $@
421       cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
422                              -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
423
424 $(obj)/%.lds: $(src)/%.lds.S FORCE
425         $(call if_changed_dep,cpp_lds_S)
426
427 # ASN.1 grammar
428 # ---------------------------------------------------------------------------
429 quiet_cmd_asn1_compiler = ASN.1   $@
430       cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
431                                 $(subst .h,.c,$@) $(subst .c,.h,$@)
432
433 .PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h
434
435 $(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
436         $(call cmd,asn1_compiler)
437
438 # Build the compiled-in targets
439 # ---------------------------------------------------------------------------
440
441 # To build objects in subdirs, we need to descend into the directories
442 $(sort $(subdir-obj-y)): $(subdir-ym) ;
443
444 #
445 # Rule to compile a set of .o files into one .o file
446 #
447 ifdef builtin-target
448
449 # built-in.a archives are made with no symbol table or index which
450 # makes them small and fast, but unable to be used by the linker.
451 # scripts/link-vmlinux.sh builds an aggregate built-in.a with a symbol
452 # table and index.
453 quiet_cmd_ar_builtin = AR      $@
454       cmd_ar_builtin = rm -f $@; \
455                      $(AR) rcSTP$(KBUILD_ARFLAGS) $@ $(filter $(real-obj-y), $^)
456
457 $(builtin-target): $(real-obj-y) FORCE
458         $(call if_changed,ar_builtin)
459
460 targets += $(builtin-target)
461 endif # builtin-target
462
463 #
464 # Rule to create modules.order file
465 #
466 # Create commands to either record .ko file or cat modules.order from
467 # a subdirectory
468 modorder-cmds =                                         \
469         $(foreach m, $(modorder),                       \
470                 $(if $(filter %/modules.order, $m),     \
471                         cat $m;, echo kernel/$m;))
472
473 $(modorder-target): $(subdir-ym) FORCE
474         $(Q)(cat /dev/null; $(modorder-cmds)) > $@
475
476 #
477 # Rule to compile a set of .o files into one .a file
478 #
479 ifdef lib-target
480 quiet_cmd_link_l_target = AR      $@
481
482 # lib target archives do get a symbol table and index
483 cmd_link_l_target = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(lib-y)
484
485 $(lib-target): $(lib-y) FORCE
486         $(call if_changed,link_l_target)
487
488 targets += $(lib-target)
489
490 dummy-object = $(obj)/.lib_exports.o
491 ksyms-lds = $(dot-target).lds
492 ifdef CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
493 ref_prefix = EXTERN(_
494 else
495 ref_prefix = EXTERN(
496 endif
497
498 quiet_cmd_export_list = EXPORTS $@
499 cmd_export_list = $(OBJDUMP) -h $< | \
500         sed -ne '/___ksymtab/s/.*+\([^ ]*\).*/$(ref_prefix)\1)/p' >$(ksyms-lds);\
501         rm -f $(dummy-object);\
502         echo | $(CC) $(a_flags) -c -o $(dummy-object) -x assembler -;\
503         $(LD) $(ld_flags) -r -o $@ -T $(ksyms-lds) $(dummy-object);\
504         rm $(dummy-object) $(ksyms-lds)
505
506 $(obj)/lib-ksyms.o: $(lib-target) FORCE
507         $(call if_changed,export_list)
508
509 targets += $(obj)/lib-ksyms.o
510
511 endif
512
513 #
514 # Rule to link composite objects
515 #
516 #  Composite objects are specified in kbuild makefile as follows:
517 #    <composite-object>-objs := <list of .o files>
518 #  or
519 #    <composite-object>-y    := <list of .o files>
520 #  or
521 #    <composite-object>-m    := <list of .o files>
522 #  The -m syntax only works if <composite object> is a module
523 link_multi_deps =                     \
524 $(filter $(addprefix $(obj)/,         \
525 $($(subst $(obj)/,,$(@:.o=-objs)))    \
526 $($(subst $(obj)/,,$(@:.o=-y)))       \
527 $($(subst $(obj)/,,$(@:.o=-m)))), $^)
528
529 quiet_cmd_link_multi-m = LD [M]  $@
530 cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
531
532 $(multi-used-m): FORCE
533         $(call if_changed,link_multi-m)
534         @{ echo $(@:.o=.ko); echo $(link_multi_deps); \
535            $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
536 $(call multi_depend, $(multi-used-m), .o, -objs -y -m)
537
538 targets += $(multi-used-m)
539 targets := $(filter-out $(PHONY), $(targets))
540
541 # Descending
542 # ---------------------------------------------------------------------------
543
544 PHONY += $(subdir-ym)
545 $(subdir-ym):
546         $(Q)$(MAKE) $(build)=$@ need-builtin=$(if $(findstring $@,$(subdir-obj-y)),1)
547
548 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
549 # ---------------------------------------------------------------------------
550
551 PHONY += FORCE
552
553 FORCE:
554
555 # Read all saved command lines and dependencies for the $(targets) we
556 # may be building above, using $(if_changed{,_dep}). As an
557 # optimization, we don't need to read them if the target does not
558 # exist, we will rebuild anyway in that case.
559
560 cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
561
562 ifneq ($(cmd_files),)
563   include $(cmd_files)
564 endif
565
566 ifneq ($(KBUILD_SRC),)
567 # Create directories for object files if they do not exist
568 obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
569 # If cmd_files exist, their directories apparently exist.  Skip mkdir.
570 exist-dirs := $(sort $(patsubst %/,%, $(dir $(cmd_files))))
571 obj-dirs := $(strip $(filter-out $(exist-dirs), $(obj-dirs)))
572 ifneq ($(obj-dirs),)
573 $(shell mkdir -p $(obj-dirs))
574 endif
575 endif
576
577 # Declare the contents of the .PHONY variable as phony.  We keep that
578 # information in a variable se we can use it in if_changed and friends.
579
580 .PHONY: $(PHONY)