drivers/pps: aesthetic tweaks to PPS-related content

[sfrench/cifs-2.6.git] / kernel / time / timekeeping.c

/*
 *  linux/kernel/time/timekeeping.c
 *
 *  Kernel timekeeping code and accessor functions
 *
 *  This code was moved from linux/kernel/timer.c.
 *  Please see that file for copyright and history logs.
 *
 */

#include <linux/timekeeper_internal.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/nmi.h>
#include <linux/sched.h>
#include <linux/sched/loadavg.h>
#include <linux/syscore_ops.h>
#include <linux/clocksource.h>
#include <linux/jiffies.h>
#include <linux/time.h>
#include <linux/tick.h>
#include <linux/stop_machine.h>
#include <linux/pvclock_gtod.h>
#include <linux/compiler.h>

#include "tick-internal.h"
#include "ntp_internal.h"
#include "timekeeping_internal.h"

#define TK_CLEAR_NTP            (1 << 0)
#define TK_MIRROR               (1 << 1)
#define TK_CLOCK_WAS_SET        (1 << 2)

/*
 * The most important data for readout fits into a single 64 byte
 * cache line.
 */
static struct {
        seqcount_t              seq;
        struct timekeeper       timekeeper;
} tk_core ____cacheline_aligned;

static DEFINE_RAW_SPINLOCK(timekeeper_lock);
static struct timekeeper shadow_timekeeper;

/**
 * struct tk_fast - NMI safe timekeeper
 * @seq:        Sequence counter for protecting updates. The lowest bit
 *              is the index for the tk_read_base array
 * @base:       tk_read_base array. Access is indexed by the lowest bit of
 *              @seq.
 *
 * See @update_fast_timekeeper() below.
 */
struct tk_fast {
        seqcount_t              seq;
        struct tk_read_base     base[2];
};

static struct tk_fast tk_fast_mono ____cacheline_aligned;
static struct tk_fast tk_fast_raw  ____cacheline_aligned;

/* flag for if timekeeping is suspended */
int __read_mostly timekeeping_suspended;

static inline void tk_normalize_xtime(struct timekeeper *tk)
{
        while (tk->tkr_mono.xtime_nsec >= ((u64)NSEC_PER_SEC << tk->tkr_mono.shift)) {
                tk->tkr_mono.xtime_nsec -= (u64)NSEC_PER_SEC << tk->tkr_mono.shift;
                tk->xtime_sec++;
        }
        while (tk->tkr_raw.xtime_nsec >= ((u64)NSEC_PER_SEC << tk->tkr_raw.shift)) {
                tk->tkr_raw.xtime_nsec -= (u64)NSEC_PER_SEC << tk->tkr_raw.shift;
                tk->raw_sec++;
        }
}

static inline struct timespec64 tk_xtime(struct timekeeper *tk)
{
        struct timespec64 ts;

        ts.tv_sec = tk->xtime_sec;
        ts.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
        return ts;
}

static void tk_set_xtime(struct timekeeper *tk, const struct timespec64 *ts)
{
        tk->xtime_sec = ts->tv_sec;
        tk->tkr_mono.xtime_nsec = (u64)ts->tv_nsec << tk->tkr_mono.shift;
}

static void tk_xtime_add(struct timekeeper *tk, const struct timespec64 *ts)
{
        tk->xtime_sec += ts->tv_sec;
        tk->tkr_mono.xtime_nsec += (u64)ts->tv_nsec << tk->tkr_mono.shift;
        tk_normalize_xtime(tk);
}

static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec64 wtm)
{
        struct timespec64 tmp;

        /*
         * Verify consistency of: offset_real = -wall_to_monotonic
         * before modifying anything
         */
        set_normalized_timespec64(&tmp, -tk->wall_to_monotonic.tv_sec,
                                        -tk->wall_to_monotonic.tv_nsec);
        WARN_ON_ONCE(tk->offs_real != timespec64_to_ktime(tmp));
        tk->wall_to_monotonic = wtm;
        set_normalized_timespec64(&tmp, -wtm.tv_sec, -wtm.tv_nsec);
        tk->offs_real = timespec64_to_ktime(tmp);
        tk->offs_tai = ktime_add(tk->offs_real, ktime_set(tk->tai_offset, 0));
}

static inline void tk_update_sleep_time(struct timekeeper *tk, ktime_t delta)
{
        tk->offs_boot = ktime_add(tk->offs_boot, delta);
}

/*
 * tk_clock_read - atomic clocksource read() helper
 *
 * This helper is necessary to use in the read paths because, while the
 * seqlock ensures we don't return a bad value while structures are updated,
 * it doesn't protect from potential crashes. There is the possibility that
 * the tkr's clocksource may change between the read reference, and the
 * clock reference passed to the read function.  This can cause crashes if
 * the wrong clocksource is passed to the wrong read function.
 * This isn't necessary to use when holding the timekeeper_lock or doing
 * a read of the fast-timekeeper tkrs (which is protected by its own locking
 * and update logic).
 */
static inline u64 tk_clock_read(struct tk_read_base *tkr)
{
        struct clocksource *clock = READ_ONCE(tkr->clock);

        return clock->read(clock);
}

#ifdef CONFIG_DEBUG_TIMEKEEPING
#define WARNING_FREQ (HZ*300) /* 5 minute rate-limiting */

static void timekeeping_check_update(struct timekeeper *tk, u64 offset)
{

        u64 max_cycles = tk->tkr_mono.clock->max_cycles;
        const char *name = tk->tkr_mono.clock->name;

        if (offset > max_cycles) {
                printk_deferred("WARNING: timekeeping: Cycle offset (%lld) is larger than allowed by the '%s' clock's max_cycles value (%lld): time overflow danger\n",
                                offset, name, max_cycles);
                printk_deferred("         timekeeping: Your kernel is sick, but tries to cope by capping time updates\n");
        } else {
                if (offset > (max_cycles >> 1)) {
                        printk_deferred("INFO: timekeeping: Cycle offset (%lld) is larger than the '%s' clock's 50%% safety margin (%lld)\n",
                                        offset, name, max_cycles >> 1);
                        printk_deferred("      timekeeping: Your kernel is still fine, but is feeling a bit nervous\n");
                }
        }

        if (tk->underflow_seen) {
                if (jiffies - tk->last_warning > WARNING_FREQ) {
                        printk_deferred("WARNING: Underflow in clocksource '%s' observed, time update ignored.\n", name);
                        printk_deferred("         Please report this, consider using a different clocksource, if possible.\n");
                        printk_deferred("         Your kernel is probably still fine.\n");
                        tk->last_warning = jiffies;
                }
                tk->underflow_seen = 0;
        }

        if (tk->overflow_seen) {
                if (jiffies - tk->last_warning > WARNING_FREQ) {
                        printk_deferred("WARNING: Overflow in clocksource '%s' observed, time update capped.\n", name);
                        printk_deferred("         Please report this, consider using a different clocksource, if possible.\n");
                        printk_deferred("         Your kernel is probably still fine.\n");
                        tk->last_warning = jiffies;
                }
                tk->overflow_seen = 0;
        }
}

static inline u64 timekeeping_get_delta(struct tk_read_base *tkr)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        u64 now, last, mask, max, delta;
        unsigned int seq;

        /*
         * Since we're called holding a seqlock, the data may shift
         * under us while we're doing the calculation. This can cause
         * false positives, since we'd note a problem but throw the
         * results away. So nest another seqlock here to atomically
         * grab the points we are checking with.
         */
        do {
                seq = read_seqcount_begin(&tk_core.seq);
                now = tk_clock_read(tkr);
                last = tkr->cycle_last;
                mask = tkr->mask;
                max = tkr->clock->max_cycles;
        } while (read_seqcount_retry(&tk_core.seq, seq));

        delta = clocksource_delta(now, last, mask);

        /*
         * Try to catch underflows by checking if we are seeing small
         * mask-relative negative values.
         */
        if (unlikely((~delta & mask) < (mask >> 3))) {
                tk->underflow_seen = 1;
                delta = 0;
        }

        /* Cap delta value to the max_cycles values to avoid mult overflows */
        if (unlikely(delta > max)) {
                tk->overflow_seen = 1;
                delta = tkr->clock->max_cycles;
        }

        return delta;
}
#else
static inline void timekeeping_check_update(struct timekeeper *tk, u64 offset)
{
}
static inline u64 timekeeping_get_delta(struct tk_read_base *tkr)
{
        u64 cycle_now, delta;

        /* read clocksource */
        cycle_now = tk_clock_read(tkr);

        /* calculate the delta since the last update_wall_time */
        delta = clocksource_delta(cycle_now, tkr->cycle_last, tkr->mask);

        return delta;
}
#endif

/**
 * tk_setup_internals - Set up internals to use clocksource clock.
 *
 * @tk:         The target timekeeper to setup.
 * @clock:              Pointer to clocksource.
 *
 * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
 * pair and interval request.
 *
 * Unless you're the timekeeping code, you should not be using this!
 */
static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
{
        u64 interval;
        u64 tmp, ntpinterval;
        struct clocksource *old_clock;

        ++tk->cs_was_changed_seq;
        old_clock = tk->tkr_mono.clock;
        tk->tkr_mono.clock = clock;
        tk->tkr_mono.mask = clock->mask;
        tk->tkr_mono.cycle_last = tk_clock_read(&tk->tkr_mono);

        tk->tkr_raw.clock = clock;
        tk->tkr_raw.mask = clock->mask;
        tk->tkr_raw.cycle_last = tk->tkr_mono.cycle_last;

        /* Do the ns -> cycle conversion first, using original mult */
        tmp = NTP_INTERVAL_LENGTH;
        tmp <<= clock->shift;
        ntpinterval = tmp;
        tmp += clock->mult/2;
        do_div(tmp, clock->mult);
        if (tmp == 0)
                tmp = 1;

        interval = (u64) tmp;
        tk->cycle_interval = interval;

        /* Go back from cycles -> shifted ns */
        tk->xtime_interval = interval * clock->mult;
        tk->xtime_remainder = ntpinterval - tk->xtime_interval;
        tk->raw_interval = interval * clock->mult;

         /* if changing clocks, convert xtime_nsec shift units */
        if (old_clock) {
                int shift_change = clock->shift - old_clock->shift;
                if (shift_change < 0) {
                        tk->tkr_mono.xtime_nsec >>= -shift_change;
                        tk->tkr_raw.xtime_nsec >>= -shift_change;
                } else {
                        tk->tkr_mono.xtime_nsec <<= shift_change;
                        tk->tkr_raw.xtime_nsec <<= shift_change;
                }
        }

        tk->tkr_mono.shift = clock->shift;
        tk->tkr_raw.shift = clock->shift;

        tk->ntp_error = 0;
        tk->ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;
        tk->ntp_tick = ntpinterval << tk->ntp_error_shift;

        /*
         * The timekeeper keeps its own mult values for the currently
         * active clocksource. These value will be adjusted via NTP
         * to counteract clock drifting.
         */
        tk->tkr_mono.mult = clock->mult;
        tk->tkr_raw.mult = clock->mult;
        tk->ntp_err_mult = 0;
}

/* Timekeeper helper functions. */

#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
static u32 default_arch_gettimeoffset(void) { return 0; }
u32 (*arch_gettimeoffset)(void) = default_arch_gettimeoffset;
#else
static inline u32 arch_gettimeoffset(void) { return 0; }
#endif

static inline u64 timekeeping_delta_to_ns(struct tk_read_base *tkr, u64 delta)
{
        u64 nsec;

        nsec = delta * tkr->mult + tkr->xtime_nsec;
        nsec >>= tkr->shift;

        /* If arch requires, add in get_arch_timeoffset() */
        return nsec + arch_gettimeoffset();
}

static inline u64 timekeeping_get_ns(struct tk_read_base *tkr)
{
        u64 delta;

        delta = timekeeping_get_delta(tkr);
        return timekeeping_delta_to_ns(tkr, delta);
}

static inline u64 timekeeping_cycles_to_ns(struct tk_read_base *tkr, u64 cycles)
{
        u64 delta;

        /* calculate the delta since the last update_wall_time */
        delta = clocksource_delta(cycles, tkr->cycle_last, tkr->mask);
        return timekeeping_delta_to_ns(tkr, delta);
}

/**
 * update_fast_timekeeper - Update the fast and NMI safe monotonic timekeeper.
 * @tkr: Timekeeping readout base from which we take the update
 *
 * We want to use this from any context including NMI and tracing /
 * instrumenting the timekeeping code itself.
 *
 * Employ the latch technique; see @raw_write_seqcount_latch.
 *
 * So if a NMI hits the update of base[0] then it will use base[1]
 * which is still consistent. In the worst case this can result is a
 * slightly wrong timestamp (a few nanoseconds). See
 * @ktime_get_mono_fast_ns.
 */
static void update_fast_timekeeper(struct tk_read_base *tkr, struct tk_fast *tkf)
{
        struct tk_read_base *base = tkf->base;

        /* Force readers off to base[1] */
        raw_write_seqcount_latch(&tkf->seq);

        /* Update base[0] */
        memcpy(base, tkr, sizeof(*base));

        /* Force readers back to base[0] */
        raw_write_seqcount_latch(&tkf->seq);

        /* Update base[1] */
        memcpy(base + 1, base, sizeof(*base));
}

/**
 * ktime_get_mono_fast_ns - Fast NMI safe access to clock monotonic
 *
 * This timestamp is not guaranteed to be monotonic across an update.
 * The timestamp is calculated by:
 *
 *      now = base_mono + clock_delta * slope
 *
 * So if the update lowers the slope, readers who are forced to the
 * not yet updated second array are still using the old steeper slope.
 *
 * tmono
 * ^
 * |    o  n
 * |   o n
 * |  u
 * | o
 * |o
 * |12345678---> reader order
 *
 * o = old slope
 * u = update
 * n = new slope
 *
 * So reader 6 will observe time going backwards versus reader 5.
 *
 * While other CPUs are likely to be able observe that, the only way
 * for a CPU local observation is when an NMI hits in the middle of
 * the update. Timestamps taken from that NMI context might be ahead
 * of the following timestamps. Callers need to be aware of that and
 * deal with it.
 */
static __always_inline u64 __ktime_get_fast_ns(struct tk_fast *tkf)
{
        struct tk_read_base *tkr;
        unsigned int seq;
        u64 now;

        do {
                seq = raw_read_seqcount_latch(&tkf->seq);
                tkr = tkf->base + (seq & 0x01);
                now = ktime_to_ns(tkr->base);

                now += timekeeping_delta_to_ns(tkr,
                                clocksource_delta(
                                        tk_clock_read(tkr),
                                        tkr->cycle_last,
                                        tkr->mask));
        } while (read_seqcount_retry(&tkf->seq, seq));

        return now;
}

u64 ktime_get_mono_fast_ns(void)
{
        return __ktime_get_fast_ns(&tk_fast_mono);
}
EXPORT_SYMBOL_GPL(ktime_get_mono_fast_ns);

u64 ktime_get_raw_fast_ns(void)
{
        return __ktime_get_fast_ns(&tk_fast_raw);
}
EXPORT_SYMBOL_GPL(ktime_get_raw_fast_ns);

/**
 * ktime_get_boot_fast_ns - NMI safe and fast access to boot clock.
 *
 * To keep it NMI safe since we're accessing from tracing, we're not using a
 * separate timekeeper with updates to monotonic clock and boot offset
 * protected with seqlocks. This has the following minor side effects:
 *
 * (1) Its possible that a timestamp be taken after the boot offset is updated
 * but before the timekeeper is updated. If this happens, the new boot offset
 * is added to the old timekeeping making the clock appear to update slightly
 * earlier:
 *    CPU 0                                        CPU 1
 *    timekeeping_inject_sleeptime64()
 *    __timekeeping_inject_sleeptime(tk, delta);
 *                                                 timestamp();
 *    timekeeping_update(tk, TK_CLEAR_NTP...);
 *
 * (2) On 32-bit systems, the 64-bit boot offset (tk->offs_boot) may be
 * partially updated.  Since the tk->offs_boot update is a rare event, this
 * should be a rare occurrence which postprocessing should be able to handle.
 */
u64 notrace ktime_get_boot_fast_ns(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;

        return (ktime_get_mono_fast_ns() + ktime_to_ns(tk->offs_boot));
}
EXPORT_SYMBOL_GPL(ktime_get_boot_fast_ns);

/* Suspend-time cycles value for halted fast timekeeper. */
static u64 cycles_at_suspend;

static u64 dummy_clock_read(struct clocksource *cs)
{
        return cycles_at_suspend;
}

static struct clocksource dummy_clock = {
        .read = dummy_clock_read,
};

/**
 * halt_fast_timekeeper - Prevent fast timekeeper from accessing clocksource.
 * @tk: Timekeeper to snapshot.
 *
 * It generally is unsafe to access the clocksource after timekeeping has been
 * suspended, so take a snapshot of the readout base of @tk and use it as the
 * fast timekeeper's readout base while suspended.  It will return the same
 * number of cycles every time until timekeeping is resumed at which time the
 * proper readout base for the fast timekeeper will be restored automatically.
 */
static void halt_fast_timekeeper(struct timekeeper *tk)
{
        static struct tk_read_base tkr_dummy;
        struct tk_read_base *tkr = &tk->tkr_mono;

        memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
        cycles_at_suspend = tk_clock_read(tkr);
        tkr_dummy.clock = &dummy_clock;
        update_fast_timekeeper(&tkr_dummy, &tk_fast_mono);

        tkr = &tk->tkr_raw;
        memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
        tkr_dummy.clock = &dummy_clock;
        update_fast_timekeeper(&tkr_dummy, &tk_fast_raw);
}

#ifdef CONFIG_GENERIC_TIME_VSYSCALL_OLD
#warning Please contact your maintainers, as GENERIC_TIME_VSYSCALL_OLD compatibity will disappear soon.

static inline void update_vsyscall(struct timekeeper *tk)
{
        struct timespec xt, wm;

        xt = timespec64_to_timespec(tk_xtime(tk));
        wm = timespec64_to_timespec(tk->wall_to_monotonic);
        update_vsyscall_old(&xt, &wm, tk->tkr_mono.clock, tk->tkr_mono.mult,
                            tk->tkr_mono.cycle_last);
}

static inline void old_vsyscall_fixup(struct timekeeper *tk)
{
        s64 remainder;

        /*
        * Store only full nanoseconds into xtime_nsec after rounding
        * it up and add the remainder to the error difference.
        * XXX - This is necessary to avoid small 1ns inconsistnecies caused
        * by truncating the remainder in vsyscalls. However, it causes
        * additional work to be done in timekeeping_adjust(). Once
        * the vsyscall implementations are converted to use xtime_nsec
        * (shifted nanoseconds), and CONFIG_GENERIC_TIME_VSYSCALL_OLD
        * users are removed, this can be killed.
        */
        remainder = tk->tkr_mono.xtime_nsec & ((1ULL << tk->tkr_mono.shift) - 1);
        if (remainder != 0) {
                tk->tkr_mono.xtime_nsec -= remainder;
                tk->tkr_mono.xtime_nsec += 1ULL << tk->tkr_mono.shift;
                tk->ntp_error += remainder << tk->ntp_error_shift;
                tk->ntp_error -= (1ULL << tk->tkr_mono.shift) << tk->ntp_error_shift;
        }
}
#else
#define old_vsyscall_fixup(tk)
#endif

static RAW_NOTIFIER_HEAD(pvclock_gtod_chain);

static void update_pvclock_gtod(struct timekeeper *tk, bool was_set)
{
        raw_notifier_call_chain(&pvclock_gtod_chain, was_set, tk);
}

/**
 * pvclock_gtod_register_notifier - register a pvclock timedata update listener
 */
int pvclock_gtod_register_notifier(struct notifier_block *nb)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long flags;
        int ret;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        ret = raw_notifier_chain_register(&pvclock_gtod_chain, nb);
        update_pvclock_gtod(tk, true);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        return ret;
}
EXPORT_SYMBOL_GPL(pvclock_gtod_register_notifier);

/**
 * pvclock_gtod_unregister_notifier - unregister a pvclock
 * timedata update listener
 */
int pvclock_gtod_unregister_notifier(struct notifier_block *nb)
{
        unsigned long flags;
        int ret;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        ret = raw_notifier_chain_unregister(&pvclock_gtod_chain, nb);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        return ret;
}
EXPORT_SYMBOL_GPL(pvclock_gtod_unregister_notifier);

/*
 * tk_update_leap_state - helper to update the next_leap_ktime
 */
static inline void tk_update_leap_state(struct timekeeper *tk)
{
        tk->next_leap_ktime = ntp_get_next_leap();
        if (tk->next_leap_ktime != KTIME_MAX)
                /* Convert to monotonic time */
                tk->next_leap_ktime = ktime_sub(tk->next_leap_ktime, tk->offs_real);
}

/*
 * Update the ktime_t based scalar nsec members of the timekeeper
 */
static inline void tk_update_ktime_data(struct timekeeper *tk)
{
        u64 seconds;
        u32 nsec;

        /*
         * The xtime based monotonic readout is:
         *      nsec = (xtime_sec + wtm_sec) * 1e9 + wtm_nsec + now();
         * The ktime based monotonic readout is:
         *      nsec = base_mono + now();
         * ==> base_mono = (xtime_sec + wtm_sec) * 1e9 + wtm_nsec
         */
        seconds = (u64)(tk->xtime_sec + tk->wall_to_monotonic.tv_sec);
        nsec = (u32) tk->wall_to_monotonic.tv_nsec;
        tk->tkr_mono.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);

        /*
         * The sum of the nanoseconds portions of xtime and
         * wall_to_monotonic can be greater/equal one second. Take
         * this into account before updating tk->ktime_sec.
         */
        nsec += (u32)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
        if (nsec >= NSEC_PER_SEC)
                seconds++;
        tk->ktime_sec = seconds;

        /* Update the monotonic raw base */
        tk->tkr_raw.base = ns_to_ktime(tk->raw_sec * NSEC_PER_SEC);
}

/* must hold timekeeper_lock */
static void timekeeping_update(struct timekeeper *tk, unsigned int action)
{
        if (action & TK_CLEAR_NTP) {
                tk->ntp_error = 0;
                ntp_clear();
        }

        tk_update_leap_state(tk);
        tk_update_ktime_data(tk);

        update_vsyscall(tk);
        update_pvclock_gtod(tk, action & TK_CLOCK_WAS_SET);

        update_fast_timekeeper(&tk->tkr_mono, &tk_fast_mono);
        update_fast_timekeeper(&tk->tkr_raw,  &tk_fast_raw);

        if (action & TK_CLOCK_WAS_SET)
                tk->clock_was_set_seq++;
        /*
         * The mirroring of the data to the shadow-timekeeper needs
         * to happen last here to ensure we don't over-write the
         * timekeeper structure on the next update with stale data
         */
        if (action & TK_MIRROR)
                memcpy(&shadow_timekeeper, &tk_core.timekeeper,
                       sizeof(tk_core.timekeeper));
}

/**
 * timekeeping_forward_now - update clock to the current time
 *
 * Forward the current clock to update its state since the last call to
 * update_wall_time(). This is useful before significant clock changes,
 * as it avoids having to deal with this time offset explicitly.
 */
static void timekeeping_forward_now(struct timekeeper *tk)
{
        u64 cycle_now, delta;

        cycle_now = tk_clock_read(&tk->tkr_mono);
        delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
        tk->tkr_mono.cycle_last = cycle_now;
        tk->tkr_raw.cycle_last  = cycle_now;

        tk->tkr_mono.xtime_nsec += delta * tk->tkr_mono.mult;

        /* If arch requires, add in get_arch_timeoffset() */
        tk->tkr_mono.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_mono.shift;


        tk->tkr_raw.xtime_nsec += delta * tk->tkr_raw.mult;

        /* If arch requires, add in get_arch_timeoffset() */
        tk->tkr_raw.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_raw.shift;

        tk_normalize_xtime(tk);
}

/**
 * __getnstimeofday64 - Returns the time of day in a timespec64.
 * @ts:         pointer to the timespec to be set
 *
 * Updates the time of day in the timespec.
 * Returns 0 on success, or -ve when suspended (timespec will be undefined).
 */
int __getnstimeofday64(struct timespec64 *ts)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long seq;
        u64 nsecs;

        do {
                seq = read_seqcount_begin(&tk_core.seq);

                ts->tv_sec = tk->xtime_sec;
                nsecs = timekeeping_get_ns(&tk->tkr_mono);

        } while (read_seqcount_retry(&tk_core.seq, seq));

        ts->tv_nsec = 0;
        timespec64_add_ns(ts, nsecs);

        /*
         * Do not bail out early, in case there were callers still using
         * the value, even in the face of the WARN_ON.
         */
        if (unlikely(timekeeping_suspended))
                return -EAGAIN;
        return 0;
}
EXPORT_SYMBOL(__getnstimeofday64);

/**
 * getnstimeofday64 - Returns the time of day in a timespec64.
 * @ts:         pointer to the timespec64 to be set
 *
 * Returns the time of day in a timespec64 (WARN if suspended).
 */
void getnstimeofday64(struct timespec64 *ts)
{
        WARN_ON(__getnstimeofday64(ts));
}
EXPORT_SYMBOL(getnstimeofday64);

ktime_t ktime_get(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned int seq;
        ktime_t base;
        u64 nsecs;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                base = tk->tkr_mono.base;
                nsecs = timekeeping_get_ns(&tk->tkr_mono);

        } while (read_seqcount_retry(&tk_core.seq, seq));

        return ktime_add_ns(base, nsecs);
}
EXPORT_SYMBOL_GPL(ktime_get);

u32 ktime_get_resolution_ns(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned int seq;
        u32 nsecs;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                nsecs = tk->tkr_mono.mult >> tk->tkr_mono.shift;
        } while (read_seqcount_retry(&tk_core.seq, seq));

        return nsecs;
}
EXPORT_SYMBOL_GPL(ktime_get_resolution_ns);

static ktime_t *offsets[TK_OFFS_MAX] = {
        [TK_OFFS_REAL]  = &tk_core.timekeeper.offs_real,
        [TK_OFFS_BOOT]  = &tk_core.timekeeper.offs_boot,
        [TK_OFFS_TAI]   = &tk_core.timekeeper.offs_tai,
};

ktime_t ktime_get_with_offset(enum tk_offsets offs)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned int seq;
        ktime_t base, *offset = offsets[offs];
        u64 nsecs;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                base = ktime_add(tk->tkr_mono.base, *offset);
                nsecs = timekeeping_get_ns(&tk->tkr_mono);

        } while (read_seqcount_retry(&tk_core.seq, seq));

        return ktime_add_ns(base, nsecs);

}
EXPORT_SYMBOL_GPL(ktime_get_with_offset);

/**
 * ktime_mono_to_any() - convert mononotic time to any other time
 * @tmono:      time to convert.
 * @offs:       which offset to use
 */
ktime_t ktime_mono_to_any(ktime_t tmono, enum tk_offsets offs)
{
        ktime_t *offset = offsets[offs];
        unsigned long seq;
        ktime_t tconv;

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                tconv = ktime_add(tmono, *offset);
        } while (read_seqcount_retry(&tk_core.seq, seq));

        return tconv;
}
EXPORT_SYMBOL_GPL(ktime_mono_to_any);

/**
 * ktime_get_raw - Returns the raw monotonic time in ktime_t format
 */
ktime_t ktime_get_raw(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned int seq;
        ktime_t base;
        u64 nsecs;

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                base = tk->tkr_raw.base;
                nsecs = timekeeping_get_ns(&tk->tkr_raw);

        } while (read_seqcount_retry(&tk_core.seq, seq));

        return ktime_add_ns(base, nsecs);
}
EXPORT_SYMBOL_GPL(ktime_get_raw);

/**
 * ktime_get_ts64 - get the monotonic clock in timespec64 format
 * @ts:         pointer to timespec variable
 *
 * The function calculates the monotonic clock from the realtime
 * clock and the wall_to_monotonic offset and stores the result
 * in normalized timespec64 format in the variable pointed to by @ts.
 */
void ktime_get_ts64(struct timespec64 *ts)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        struct timespec64 tomono;
        unsigned int seq;
        u64 nsec;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                ts->tv_sec = tk->xtime_sec;
                nsec = timekeeping_get_ns(&tk->tkr_mono);
                tomono = tk->wall_to_monotonic;

        } while (read_seqcount_retry(&tk_core.seq, seq));

        ts->tv_sec += tomono.tv_sec;
        ts->tv_nsec = 0;
        timespec64_add_ns(ts, nsec + tomono.tv_nsec);
}
EXPORT_SYMBOL_GPL(ktime_get_ts64);

/**
 * ktime_get_seconds - Get the seconds portion of CLOCK_MONOTONIC
 *
 * Returns the seconds portion of CLOCK_MONOTONIC with a single non
 * serialized read. tk->ktime_sec is of type 'unsigned long' so this
 * works on both 32 and 64 bit systems. On 32 bit systems the readout
 * covers ~136 years of uptime which should be enough to prevent
 * premature wrap arounds.
 */
time64_t ktime_get_seconds(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;

        WARN_ON(timekeeping_suspended);
        return tk->ktime_sec;
}
EXPORT_SYMBOL_GPL(ktime_get_seconds);

/**
 * ktime_get_real_seconds - Get the seconds portion of CLOCK_REALTIME
 *
 * Returns the wall clock seconds since 1970. This replaces the
 * get_seconds() interface which is not y2038 safe on 32bit systems.
 *
 * For 64bit systems the fast access to tk->xtime_sec is preserved. On
 * 32bit systems the access must be protected with the sequence
 * counter to provide "atomic" access to the 64bit tk->xtime_sec
 * value.
 */
time64_t ktime_get_real_seconds(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        time64_t seconds;
        unsigned int seq;

        if (IS_ENABLED(CONFIG_64BIT))
                return tk->xtime_sec;

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                seconds = tk->xtime_sec;

        } while (read_seqcount_retry(&tk_core.seq, seq));

        return seconds;
}
EXPORT_SYMBOL_GPL(ktime_get_real_seconds);

/**
 * __ktime_get_real_seconds - The same as ktime_get_real_seconds
 * but without the sequence counter protect. This internal function
 * is called just when timekeeping lock is already held.
 */
time64_t __ktime_get_real_seconds(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;

        return tk->xtime_sec;
}

/**
 * ktime_get_snapshot - snapshots the realtime/monotonic raw clocks with counter
 * @systime_snapshot:   pointer to struct receiving the system time snapshot
 */
void ktime_get_snapshot(struct system_time_snapshot *systime_snapshot)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long seq;
        ktime_t base_raw;
        ktime_t base_real;
        u64 nsec_raw;
        u64 nsec_real;
        u64 now;

        WARN_ON_ONCE(timekeeping_suspended);

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                now = tk_clock_read(&tk->tkr_mono);
                systime_snapshot->cs_was_changed_seq = tk->cs_was_changed_seq;
                systime_snapshot->clock_was_set_seq = tk->clock_was_set_seq;
                base_real = ktime_add(tk->tkr_mono.base,
                                      tk_core.timekeeper.offs_real);
                base_raw = tk->tkr_raw.base;
                nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, now);
                nsec_raw  = timekeeping_cycles_to_ns(&tk->tkr_raw, now);
        } while (read_seqcount_retry(&tk_core.seq, seq));

        systime_snapshot->cycles = now;
        systime_snapshot->real = ktime_add_ns(base_real, nsec_real);
        systime_snapshot->raw = ktime_add_ns(base_raw, nsec_raw);
}
EXPORT_SYMBOL_GPL(ktime_get_snapshot);

/* Scale base by mult/div checking for overflow */
static int scale64_check_overflow(u64 mult, u64 div, u64 *base)
{
        u64 tmp, rem;

        tmp = div64_u64_rem(*base, div, &rem);

        if (((int)sizeof(u64)*8 - fls64(mult) < fls64(tmp)) ||
            ((int)sizeof(u64)*8 - fls64(mult) < fls64(rem)))
                return -EOVERFLOW;
        tmp *= mult;
        rem *= mult;

        do_div(rem, div);
        *base = tmp + rem;
        return 0;
}

/**
 * adjust_historical_crosststamp - adjust crosstimestamp previous to current interval
 * @history:                    Snapshot representing start of history
 * @partial_history_cycles:     Cycle offset into history (fractional part)
 * @total_history_cycles:       Total history length in cycles
 * @discontinuity:              True indicates clock was set on history period
 * @ts:                         Cross timestamp that should be adjusted using
 *      partial/total ratio
 *
 * Helper function used by get_device_system_crosststamp() to correct the
 * crosstimestamp corresponding to the start of the current interval to the
 * system counter value (timestamp point) provided by the driver. The
 * total_history_* quantities are the total history starting at the provided
 * reference point and ending at the start of the current interval. The cycle
 * count between the driver timestamp point and the start of the current
 * interval is partial_history_cycles.
 */
static int adjust_historical_crosststamp(struct system_time_snapshot *history,
                                         u64 partial_history_cycles,
                                         u64 total_history_cycles,
                                         bool discontinuity,
                                         struct system_device_crosststamp *ts)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        u64 corr_raw, corr_real;
        bool interp_forward;
        int ret;

        if (total_history_cycles == 0 || partial_history_cycles == 0)
                return 0;

        /* Interpolate shortest distance from beginning or end of history */
        interp_forward = partial_history_cycles > total_history_cycles / 2;
        partial_history_cycles = interp_forward ?
                total_history_cycles - partial_history_cycles :
                partial_history_cycles;

        /*
         * Scale the monotonic raw time delta by:
         *      partial_history_cycles / total_history_cycles
         */
        corr_raw = (u64)ktime_to_ns(
                ktime_sub(ts->sys_monoraw, history->raw));
        ret = scale64_check_overflow(partial_history_cycles,
                                     total_history_cycles, &corr_raw);
        if (ret)
                return ret;

        /*
         * If there is a discontinuity in the history, scale monotonic raw
         *      correction by:
         *      mult(real)/mult(raw) yielding the realtime correction
         * Otherwise, calculate the realtime correction similar to monotonic
         *      raw calculation
         */
        if (discontinuity) {
                corr_real = mul_u64_u32_div
                        (corr_raw, tk->tkr_mono.mult, tk->tkr_raw.mult);
        } else {
                corr_real = (u64)ktime_to_ns(
                        ktime_sub(ts->sys_realtime, history->real));
                ret = scale64_check_overflow(partial_history_cycles,
                                             total_history_cycles, &corr_real);
                if (ret)
                        return ret;
        }

        /* Fixup monotonic raw and real time time values */
        if (interp_forward) {
                ts->sys_monoraw = ktime_add_ns(history->raw, corr_raw);
                ts->sys_realtime = ktime_add_ns(history->real, corr_real);
        } else {
                ts->sys_monoraw = ktime_sub_ns(ts->sys_monoraw, corr_raw);
                ts->sys_realtime = ktime_sub_ns(ts->sys_realtime, corr_real);
        }

        return 0;
}

/*
 * cycle_between - true if test occurs chronologically between before and after
 */
static bool cycle_between(u64 before, u64 test, u64 after)
{
        if (test > before && test < after)
                return true;
        if (test < before && before > after)
                return true;
        return false;
}

/**
 * get_device_system_crosststamp - Synchronously capture system/device timestamp
 * @get_time_fn:        Callback to get simultaneous device time and
 *      system counter from the device driver
 * @ctx:                Context passed to get_time_fn()
 * @history_begin:      Historical reference point used to interpolate system
 *      time when counter provided by the driver is before the current interval
 * @xtstamp:            Receives simultaneously captured system and device time
 *
 * Reads a timestamp from a device and correlates it to system time
 */
int get_device_system_crosststamp(int (*get_time_fn)
                                  (ktime_t *device_time,
                                   struct system_counterval_t *sys_counterval,
                                   void *ctx),
                                  void *ctx,
                                  struct system_time_snapshot *history_begin,
                                  struct system_device_crosststamp *xtstamp)
{
        struct system_counterval_t system_counterval;
        struct timekeeper *tk = &tk_core.timekeeper;
        u64 cycles, now, interval_start;
        unsigned int clock_was_set_seq = 0;
        ktime_t base_real, base_raw;
        u64 nsec_real, nsec_raw;
        u8 cs_was_changed_seq;
        unsigned long seq;
        bool do_interp;
        int ret;

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                /*
                 * Try to synchronously capture device time and a system
                 * counter value calling back into the device driver
                 */
                ret = get_time_fn(&xtstamp->device, &system_counterval, ctx);
                if (ret)
                        return ret;

                /*
                 * Verify that the clocksource associated with the captured
                 * system counter value is the same as the currently installed
                 * timekeeper clocksource
                 */
                if (tk->tkr_mono.clock != system_counterval.cs)
                        return -ENODEV;
                cycles = system_counterval.cycles;

                /*
                 * Check whether the system counter value provided by the
                 * device driver is on the current timekeeping interval.
                 */
                now = tk_clock_read(&tk->tkr_mono);
                interval_start = tk->tkr_mono.cycle_last;
                if (!cycle_between(interval_start, cycles, now)) {
                        clock_was_set_seq = tk->clock_was_set_seq;
                        cs_was_changed_seq = tk->cs_was_changed_seq;
                        cycles = interval_start;
                        do_interp = true;
                } else {
                        do_interp = false;
                }

                base_real = ktime_add(tk->tkr_mono.base,
                                      tk_core.timekeeper.offs_real);
                base_raw = tk->tkr_raw.base;

                nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono,
                                                     system_counterval.cycles);
                nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw,
                                                    system_counterval.cycles);
        } while (read_seqcount_retry(&tk_core.seq, seq));

        xtstamp->sys_realtime = ktime_add_ns(base_real, nsec_real);
        xtstamp->sys_monoraw = ktime_add_ns(base_raw, nsec_raw);

        /*
         * Interpolate if necessary, adjusting back from the start of the
         * current interval
         */
        if (do_interp) {
                u64 partial_history_cycles, total_history_cycles;
                bool discontinuity;

                /*
                 * Check that the counter value occurs after the provided
                 * history reference and that the history doesn't cross a
                 * clocksource change
                 */
                if (!history_begin ||
                    !cycle_between(history_begin->cycles,
                                   system_counterval.cycles, cycles) ||
                    history_begin->cs_was_changed_seq != cs_was_changed_seq)
                        return -EINVAL;
                partial_history_cycles = cycles - system_counterval.cycles;
                total_history_cycles = cycles - history_begin->cycles;
                discontinuity =
                        history_begin->clock_was_set_seq != clock_was_set_seq;

                ret = adjust_historical_crosststamp(history_begin,
                                                    partial_history_cycles,
                                                    total_history_cycles,
                                                    discontinuity, xtstamp);
                if (ret)
                        return ret;
        }

        return 0;
}
EXPORT_SYMBOL_GPL(get_device_system_crosststamp);

/**
 * do_gettimeofday - Returns the time of day in a timeval
 * @tv:         pointer to the timeval to be set
 *
 * NOTE: Users should be converted to using getnstimeofday()
 */
void do_gettimeofday(struct timeval *tv)
{
        struct timespec64 now;

        getnstimeofday64(&now);
        tv->tv_sec = now.tv_sec;
        tv->tv_usec = now.tv_nsec/1000;
}
EXPORT_SYMBOL(do_gettimeofday);

/**
 * do_settimeofday64 - Sets the time of day.
 * @ts:     pointer to the timespec64 variable containing the new time
 *
 * Sets the time of day to the new time and update NTP and notify hrtimers
 */
int do_settimeofday64(const struct timespec64 *ts)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        struct timespec64 ts_delta, xt;
        unsigned long flags;
        int ret = 0;

        if (!timespec64_valid_strict(ts))
                return -EINVAL;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);

        timekeeping_forward_now(tk);

        xt = tk_xtime(tk);
        ts_delta.tv_sec = ts->tv_sec - xt.tv_sec;
        ts_delta.tv_nsec = ts->tv_nsec - xt.tv_nsec;

        if (timespec64_compare(&tk->wall_to_monotonic, &ts_delta) > 0) {
                ret = -EINVAL;
                goto out;
        }

        tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, ts_delta));

        tk_set_xtime(tk, ts);
out:
        timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);

        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        /* signal hrtimers about time change */
        clock_was_set();

        return ret;
}
EXPORT_SYMBOL(do_settimeofday64);

/**
 * timekeeping_inject_offset - Adds or subtracts from the current time.
 * @tv:         pointer to the timespec variable containing the offset
 *
 * Adds or subtracts an offset value from the current time.
 */
int timekeeping_inject_offset(struct timespec *ts)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long flags;
        struct timespec64 ts64, tmp;
        int ret = 0;

        if (!timespec_inject_offset_valid(ts))
                return -EINVAL;

        ts64 = timespec_to_timespec64(*ts);

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);

        timekeeping_forward_now(tk);

        /* Make sure the proposed value is valid */
        tmp = timespec64_add(tk_xtime(tk),  ts64);
        if (timespec64_compare(&tk->wall_to_monotonic, &ts64) > 0 ||
            !timespec64_valid_strict(&tmp)) {
                ret = -EINVAL;
                goto error;
        }

        tk_xtime_add(tk, &ts64);
        tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, ts64));

error: /* even if we error out, we forwarded the time, so call update */
        timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);

        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        /* signal hrtimers about time change */
        clock_was_set();

        return ret;
}
EXPORT_SYMBOL(timekeeping_inject_offset);

/**
 * __timekeeping_set_tai_offset - Sets the TAI offset from UTC and monotonic
 *
 */
static void __timekeeping_set_tai_offset(struct timekeeper *tk, s32 tai_offset)
{
        tk->tai_offset = tai_offset;
        tk->offs_tai = ktime_add(tk->offs_real, ktime_set(tai_offset, 0));
}

/**
 * change_clocksource - Swaps clocksources if a new one is available
 *
 * Accumulates current time interval and initializes new clocksource
 */
static int change_clocksource(void *data)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        struct clocksource *new, *old;
        unsigned long flags;

        new = (struct clocksource *) data;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);

        timekeeping_forward_now(tk);
        /*
         * If the cs is in module, get a module reference. Succeeds
         * for built-in code (owner == NULL) as well.
         */
        if (try_module_get(new->owner)) {
                if (!new->enable || new->enable(new) == 0) {
                        old = tk->tkr_mono.clock;
                        tk_setup_internals(tk, new);
                        if (old->disable)
                                old->disable(old);
                        module_put(old->owner);
                } else {
                        module_put(new->owner);
                }
        }
        timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);

        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        return 0;
}

/**
 * timekeeping_notify - Install a new clock source
 * @clock:              pointer to the clock source
 *
 * This function is called from clocksource.c after a new, better clock
 * source has been registered. The caller holds the clocksource_mutex.
 */
int timekeeping_notify(struct clocksource *clock)
{
        struct timekeeper *tk = &tk_core.timekeeper;

        if (tk->tkr_mono.clock == clock)
                return 0;
        stop_machine(change_clocksource, clock, NULL);
        tick_clock_notify();
        return tk->tkr_mono.clock == clock ? 0 : -1;
}

/**
 * getrawmonotonic64 - Returns the raw monotonic time in a timespec
 * @ts:         pointer to the timespec64 to be set
 *
 * Returns the raw monotonic time (completely un-modified by ntp)
 */
void getrawmonotonic64(struct timespec64 *ts)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long seq;
        u64 nsecs;

        do {
                seq = read_seqcount_begin(&tk_core.seq);
                ts->tv_sec = tk->raw_sec;
                nsecs = timekeeping_get_ns(&tk->tkr_raw);

        } while (read_seqcount_retry(&tk_core.seq, seq));

        ts->tv_nsec = 0;
        timespec64_add_ns(ts, nsecs);
}
EXPORT_SYMBOL(getrawmonotonic64);


/**
 * timekeeping_valid_for_hres - Check if timekeeping is suitable for hres
 */
int timekeeping_valid_for_hres(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long seq;
        int ret;

        do {
                seq = read_seqcount_begin(&tk_core.seq);

                ret = tk->tkr_mono.clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;

        } while (read_seqcount_retry(&tk_core.seq, seq));

        return ret;
}

/**
 * timekeeping_max_deferment - Returns max time the clocksource can be deferred
 */
u64 timekeeping_max_deferment(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long seq;
        u64 ret;

        do {
                seq = read_seqcount_begin(&tk_core.seq);

                ret = tk->tkr_mono.clock->max_idle_ns;

        } while (read_seqcount_retry(&tk_core.seq, seq));

        return ret;
}

/**
 * read_persistent_clock -  Return time from the persistent clock.
 *
 * Weak dummy function for arches that do not yet support it.
 * Reads the time from the battery backed persistent clock.
 * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
 *
 *  XXX - Do be sure to remove it once all arches implement it.
 */
void __weak read_persistent_clock(struct timespec *ts)
{
        ts->tv_sec = 0;
        ts->tv_nsec = 0;
}

void __weak read_persistent_clock64(struct timespec64 *ts64)
{
        struct timespec ts;

        read_persistent_clock(&ts);
        *ts64 = timespec_to_timespec64(ts);
}

/**
 * read_boot_clock64 -  Return time of the system start.
 *
 * Weak dummy function for arches that do not yet support it.
 * Function to read the exact time the system has been started.
 * Returns a timespec64 with tv_sec=0 and tv_nsec=0 if unsupported.
 *
 *  XXX - Do be sure to remove it once all arches implement it.
 */
void __weak read_boot_clock64(struct timespec64 *ts)
{
        ts->tv_sec = 0;
        ts->tv_nsec = 0;
}

/* Flag for if timekeeping_resume() has injected sleeptime */
static bool sleeptime_injected;

/* Flag for if there is a persistent clock on this platform */
static bool persistent_clock_exists;

/*
 * timekeeping_init - Initializes the clocksource and common timekeeping values
 */
void __init timekeeping_init(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        struct clocksource *clock;
        unsigned long flags;
        struct timespec64 now, boot, tmp;

        read_persistent_clock64(&now);
        if (!timespec64_valid_strict(&now)) {
                pr_warn("WARNING: Persistent clock returned invalid value!\n"
                        "         Check your CMOS/BIOS settings.\n");
                now.tv_sec = 0;
                now.tv_nsec = 0;
        } else if (now.tv_sec || now.tv_nsec)
                persistent_clock_exists = true;

        read_boot_clock64(&boot);
        if (!timespec64_valid_strict(&boot)) {
                pr_warn("WARNING: Boot clock returned invalid value!\n"
                        "         Check your CMOS/BIOS settings.\n");
                boot.tv_sec = 0;
                boot.tv_nsec = 0;
        }

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);
        ntp_init();

        clock = clocksource_default_clock();
        if (clock->enable)
                clock->enable(clock);
        tk_setup_internals(tk, clock);

        tk_set_xtime(tk, &now);
        tk->raw_sec = 0;
        if (boot.tv_sec == 0 && boot.tv_nsec == 0)
                boot = tk_xtime(tk);

        set_normalized_timespec64(&tmp, -boot.tv_sec, -boot.tv_nsec);
        tk_set_wall_to_mono(tk, tmp);

        timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);

        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
}

/* time in seconds when suspend began for persistent clock */
static struct timespec64 timekeeping_suspend_time;

/**
 * __timekeeping_inject_sleeptime - Internal function to add sleep interval
 * @delta: pointer to a timespec delta value
 *
 * Takes a timespec offset measuring a suspend interval and properly
 * adds the sleep offset to the timekeeping variables.
 */
static void __timekeeping_inject_sleeptime(struct timekeeper *tk,
                                           struct timespec64 *delta)
{
        if (!timespec64_valid_strict(delta)) {
                printk_deferred(KERN_WARNING
                                "__timekeeping_inject_sleeptime: Invalid "
                                "sleep delta value!\n");
                return;
        }
        tk_xtime_add(tk, delta);
        tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, *delta));
        tk_update_sleep_time(tk, timespec64_to_ktime(*delta));
        tk_debug_account_sleep_time(delta);
}

#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
/**
 * We have three kinds of time sources to use for sleep time
 * injection, the preference order is:
 * 1) non-stop clocksource
 * 2) persistent clock (ie: RTC accessible when irqs are off)
 * 3) RTC
 *
 * 1) and 2) are used by timekeeping, 3) by RTC subsystem.
 * If system has neither 1) nor 2), 3) will be used finally.
 *
 *
 * If timekeeping has injected sleeptime via either 1) or 2),
 * 3) becomes needless, so in this case we don't need to call
 * rtc_resume(), and this is what timekeeping_rtc_skipresume()
 * means.
 */
bool timekeeping_rtc_skipresume(void)
{
        return sleeptime_injected;
}

/**
 * 1) can be determined whether to use or not only when doing
 * timekeeping_resume() which is invoked after rtc_suspend(),
 * so we can't skip rtc_suspend() surely if system has 1).
 *
 * But if system has 2), 2) will definitely be used, so in this
 * case we don't need to call rtc_suspend(), and this is what
 * timekeeping_rtc_skipsuspend() means.
 */
bool timekeeping_rtc_skipsuspend(void)
{
        return persistent_clock_exists;
}

/**
 * timekeeping_inject_sleeptime64 - Adds suspend interval to timeekeeping values
 * @delta: pointer to a timespec64 delta value
 *
 * This hook is for architectures that cannot support read_persistent_clock64
 * because their RTC/persistent clock is only accessible when irqs are enabled.
 * and also don't have an effective nonstop clocksource.
 *
 * This function should only be called by rtc_resume(), and allows
 * a suspend offset to be injected into the timekeeping values.
 */
void timekeeping_inject_sleeptime64(struct timespec64 *delta)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long flags;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);

        timekeeping_forward_now(tk);

        __timekeeping_inject_sleeptime(tk, delta);

        timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);

        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        /* signal hrtimers about time change */
        clock_was_set();
}
#endif

/**
 * timekeeping_resume - Resumes the generic timekeeping subsystem.
 */
void timekeeping_resume(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        struct clocksource *clock = tk->tkr_mono.clock;
        unsigned long flags;
        struct timespec64 ts_new, ts_delta;
        u64 cycle_now;

        sleeptime_injected = false;
        read_persistent_clock64(&ts_new);

        clockevents_resume();
        clocksource_resume();

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);

        /*
         * After system resumes, we need to calculate the suspended time and
         * compensate it for the OS time. There are 3 sources that could be
         * used: Nonstop clocksource during suspend, persistent clock and rtc
         * device.
         *
         * One specific platform may have 1 or 2 or all of them, and the
         * preference will be:
         *      suspend-nonstop clocksource -> persistent clock -> rtc
         * The less preferred source will only be tried if there is no better
         * usable source. The rtc part is handled separately in rtc core code.
         */
        cycle_now = tk_clock_read(&tk->tkr_mono);
        if ((clock->flags & CLOCK_SOURCE_SUSPEND_NONSTOP) &&
                cycle_now > tk->tkr_mono.cycle_last) {
                u64 nsec, cyc_delta;

                cyc_delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last,
                                              tk->tkr_mono.mask);
                nsec = mul_u64_u32_shr(cyc_delta, clock->mult, clock->shift);
                ts_delta = ns_to_timespec64(nsec);
                sleeptime_injected = true;
        } else if (timespec64_compare(&ts_new, &timekeeping_suspend_time) > 0) {
                ts_delta = timespec64_sub(ts_new, timekeeping_suspend_time);
                sleeptime_injected = true;
        }

        if (sleeptime_injected)
                __timekeeping_inject_sleeptime(tk, &ts_delta);

        /* Re-base the last cycle value */
        tk->tkr_mono.cycle_last = cycle_now;
        tk->tkr_raw.cycle_last  = cycle_now;

        tk->ntp_error = 0;
        timekeeping_suspended = 0;
        timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        touch_softlockup_watchdog();

        tick_resume();
        hrtimers_resume();
}

int timekeeping_suspend(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long flags;
        struct timespec64               delta, delta_delta;
        static struct timespec64        old_delta;

        read_persistent_clock64(&timekeeping_suspend_time);

        /*
         * On some systems the persistent_clock can not be detected at
         * timekeeping_init by its return value, so if we see a valid
         * value returned, update the persistent_clock_exists flag.
         */
        if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec)
                persistent_clock_exists = true;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);
        timekeeping_forward_now(tk);
        timekeeping_suspended = 1;

        if (persistent_clock_exists) {
                /*
                 * To avoid drift caused by repeated suspend/resumes,
                 * which each can add ~1 second drift error,
                 * try to compensate so the difference in system time
                 * and persistent_clock time stays close to constant.
                 */
                delta = timespec64_sub(tk_xtime(tk), timekeeping_suspend_time);
                delta_delta = timespec64_sub(delta, old_delta);
                if (abs(delta_delta.tv_sec) >= 2) {
                        /*
                         * if delta_delta is too large, assume time correction
                         * has occurred and set old_delta to the current delta.
                         */
                        old_delta = delta;
                } else {
                        /* Otherwise try to adjust old_system to compensate */
                        timekeeping_suspend_time =
                                timespec64_add(timekeeping_suspend_time, delta_delta);
                }
        }

        timekeeping_update(tk, TK_MIRROR);
        halt_fast_timekeeper(tk);
        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        tick_suspend();
        clocksource_suspend();
        clockevents_suspend();

        return 0;
}

/* sysfs resume/suspend bits for timekeeping */
static struct syscore_ops timekeeping_syscore_ops = {
        .resume         = timekeeping_resume,
        .suspend        = timekeeping_suspend,
};

static int __init timekeeping_init_ops(void)
{
        register_syscore_ops(&timekeeping_syscore_ops);
        return 0;
}
device_initcall(timekeeping_init_ops);

/*
 * Apply a multiplier adjustment to the timekeeper
 */
static __always_inline void timekeeping_apply_adjustment(struct timekeeper *tk,
                                                         s64 offset,
                                                         bool negative,
                                                         int adj_scale)
{
        s64 interval = tk->cycle_interval;
        s32 mult_adj = 1;

        if (negative) {
                mult_adj = -mult_adj;
                interval = -interval;
                offset  = -offset;
        }
        mult_adj <<= adj_scale;
        interval <<= adj_scale;
        offset <<= adj_scale;

        /*
         * So the following can be confusing.
         *
         * To keep things simple, lets assume mult_adj == 1 for now.
         *
         * When mult_adj != 1, remember that the interval and offset values
         * have been appropriately scaled so the math is the same.
         *
         * The basic idea here is that we're increasing the multiplier
         * by one, this causes the xtime_interval to be incremented by
         * one cycle_interval. This is because:
         *      xtime_interval = cycle_interval * mult
         * So if mult is being incremented by one:
         *      xtime_interval = cycle_interval * (mult + 1)
         * Its the same as:
         *      xtime_interval = (cycle_interval * mult) + cycle_interval
         * Which can be shortened to:
         *      xtime_interval += cycle_interval
         *
         * So offset stores the non-accumulated cycles. Thus the current
         * time (in shifted nanoseconds) is:
         *      now = (offset * adj) + xtime_nsec
         * Now, even though we're adjusting the clock frequency, we have
         * to keep time consistent. In other words, we can't jump back
         * in time, and we also want to avoid jumping forward in time.
         *
         * So given the same offset value, we need the time to be the same
         * both before and after the freq adjustment.
         *      now = (offset * adj_1) + xtime_nsec_1
         *      now = (offset * adj_2) + xtime_nsec_2
         * So:
         *      (offset * adj_1) + xtime_nsec_1 =
         *              (offset * adj_2) + xtime_nsec_2
         * And we know:
         *      adj_2 = adj_1 + 1
         * So:
         *      (offset * adj_1) + xtime_nsec_1 =
         *              (offset * (adj_1+1)) + xtime_nsec_2
         *      (offset * adj_1) + xtime_nsec_1 =
         *              (offset * adj_1) + offset + xtime_nsec_2
         * Canceling the sides:
         *      xtime_nsec_1 = offset + xtime_nsec_2
         * Which gives us:
         *      xtime_nsec_2 = xtime_nsec_1 - offset
         * Which simplfies to:
         *      xtime_nsec -= offset
         *
         * XXX - TODO: Doc ntp_error calculation.
         */
        if ((mult_adj > 0) && (tk->tkr_mono.mult + mult_adj < mult_adj)) {
                /* NTP adjustment caused clocksource mult overflow */
                WARN_ON_ONCE(1);
                return;
        }

        tk->tkr_mono.mult += mult_adj;
        tk->xtime_interval += interval;
        tk->tkr_mono.xtime_nsec -= offset;
        tk->ntp_error -= (interval - offset) << tk->ntp_error_shift;
}

/*
 * Calculate the multiplier adjustment needed to match the frequency
 * specified by NTP
 */
static __always_inline void timekeeping_freqadjust(struct timekeeper *tk,
                                                        s64 offset)
{
        s64 interval = tk->cycle_interval;
        s64 xinterval = tk->xtime_interval;
        u32 base = tk->tkr_mono.clock->mult;
        u32 max = tk->tkr_mono.clock->maxadj;
        u32 cur_adj = tk->tkr_mono.mult;
        s64 tick_error;
        bool negative;
        u32 adj_scale;

        /* Remove any current error adj from freq calculation */
        if (tk->ntp_err_mult)
                xinterval -= tk->cycle_interval;

        tk->ntp_tick = ntp_tick_length();

        /* Calculate current error per tick */
        tick_error = ntp_tick_length() >> tk->ntp_error_shift;
        tick_error -= (xinterval + tk->xtime_remainder);

        /* Don't worry about correcting it if its small */
        if (likely((tick_error >= 0) && (tick_error <= interval)))
                return;

        /* preserve the direction of correction */
        negative = (tick_error < 0);

        /* If any adjustment would pass the max, just return */
        if (negative && (cur_adj - 1) <= (base - max))
                return;
        if (!negative && (cur_adj + 1) >= (base + max))
                return;
        /*
         * Sort out the magnitude of the correction, but
         * avoid making so large a correction that we go
         * over the max adjustment.
         */
        adj_scale = 0;
        tick_error = abs(tick_error);
        while (tick_error > interval) {
                u32 adj = 1 << (adj_scale + 1);

                /* Check if adjustment gets us within 1 unit from the max */
                if (negative && (cur_adj - adj) <= (base - max))
                        break;
                if (!negative && (cur_adj + adj) >= (base + max))
                        break;

                adj_scale++;
                tick_error >>= 1;
        }

        /* scale the corrections */
        timekeeping_apply_adjustment(tk, offset, negative, adj_scale);
}

/*
 * Adjust the timekeeper's multiplier to the correct frequency
 * and also to reduce the accumulated error value.
 */
static void timekeeping_adjust(struct timekeeper *tk, s64 offset)
{
        /* Correct for the current frequency error */
        timekeeping_freqadjust(tk, offset);

        /* Next make a small adjustment to fix any cumulative error */
        if (!tk->ntp_err_mult && (tk->ntp_error > 0)) {
                tk->ntp_err_mult = 1;
                timekeeping_apply_adjustment(tk, offset, 0, 0);
        } else if (tk->ntp_err_mult && (tk->ntp_error <= 0)) {
                /* Undo any existing error adjustment */
                timekeeping_apply_adjustment(tk, offset, 1, 0);
                tk->ntp_err_mult = 0;
        }

        if (unlikely(tk->tkr_mono.clock->maxadj &&
                (abs(tk->tkr_mono.mult - tk->tkr_mono.clock->mult)
                        > tk->tkr_mono.clock->maxadj))) {
                printk_once(KERN_WARNING
                        "Adjusting %s more than 11%% (%ld vs %ld)\n",
                        tk->tkr_mono.clock->name, (long)tk->tkr_mono.mult,
                        (long)tk->tkr_mono.clock->mult + tk->tkr_mono.clock->maxadj);
        }

        /*
         * It may be possible that when we entered this function, xtime_nsec
         * was very small.  Further, if we're slightly speeding the clocksource
         * in the code above, its possible the required corrective factor to
         * xtime_nsec could cause it to underflow.
         *
         * Now, since we already accumulated the second, cannot simply roll
         * the accumulated second back, since the NTP subsystem has been
         * notified via second_overflow. So instead we push xtime_nsec forward
         * by the amount we underflowed, and add that amount into the error.
         *
         * We'll correct this error next time through this function, when
         * xtime_nsec is not as small.
         */
        if (unlikely((s64)tk->tkr_mono.xtime_nsec < 0)) {
                s64 neg = -(s64)tk->tkr_mono.xtime_nsec;
                tk->tkr_mono.xtime_nsec = 0;
                tk->ntp_error += neg << tk->ntp_error_shift;
        }
}

/**
 * accumulate_nsecs_to_secs - Accumulates nsecs into secs
 *
 * Helper function that accumulates the nsecs greater than a second
 * from the xtime_nsec field to the xtime_secs field.
 * It also calls into the NTP code to handle leapsecond processing.
 *
 */
static inline unsigned int accumulate_nsecs_to_secs(struct timekeeper *tk)
{
        u64 nsecps = (u64)NSEC_PER_SEC << tk->tkr_mono.shift;
        unsigned int clock_set = 0;

        while (tk->tkr_mono.xtime_nsec >= nsecps) {
                int leap;

                tk->tkr_mono.xtime_nsec -= nsecps;
                tk->xtime_sec++;

                /* Figure out if its a leap sec and apply if needed */
                leap = second_overflow(tk->xtime_sec);
                if (unlikely(leap)) {
                        struct timespec64 ts;

                        tk->xtime_sec += leap;

                        ts.tv_sec = leap;
                        ts.tv_nsec = 0;
                        tk_set_wall_to_mono(tk,
                                timespec64_sub(tk->wall_to_monotonic, ts));

                        __timekeeping_set_tai_offset(tk, tk->tai_offset - leap);

                        clock_set = TK_CLOCK_WAS_SET;
                }
        }
        return clock_set;
}

/**
 * logarithmic_accumulation - shifted accumulation of cycles
 *
 * This functions accumulates a shifted interval of cycles into
 * into a shifted interval nanoseconds. Allows for O(log) accumulation
 * loop.
 *
 * Returns the unconsumed cycles.
 */
static u64 logarithmic_accumulation(struct timekeeper *tk, u64 offset,
                                    u32 shift, unsigned int *clock_set)
{
        u64 interval = tk->cycle_interval << shift;
        u64 snsec_per_sec;

        /* If the offset is smaller than a shifted interval, do nothing */
        if (offset < interval)
                return offset;

        /* Accumulate one shifted interval */
        offset -= interval;
        tk->tkr_mono.cycle_last += interval;
        tk->tkr_raw.cycle_last  += interval;

        tk->tkr_mono.xtime_nsec += tk->xtime_interval << shift;
        *clock_set |= accumulate_nsecs_to_secs(tk);

        /* Accumulate raw time */
        tk->tkr_raw.xtime_nsec += tk->raw_interval << shift;
        snsec_per_sec = (u64)NSEC_PER_SEC << tk->tkr_raw.shift;
        while (tk->tkr_raw.xtime_nsec >= snsec_per_sec) {
                tk->tkr_raw.xtime_nsec -= snsec_per_sec;
                tk->raw_sec++;
        }

        /* Accumulate error between NTP and clock interval */
        tk->ntp_error += tk->ntp_tick << shift;
        tk->ntp_error -= (tk->xtime_interval + tk->xtime_remainder) <<
                                                (tk->ntp_error_shift + shift);

        return offset;
}

/**
 * update_wall_time - Uses the current clocksource to increment the wall time
 *
 */
void update_wall_time(void)
{
        struct timekeeper *real_tk = &tk_core.timekeeper;
        struct timekeeper *tk = &shadow_timekeeper;
        u64 offset;
        int shift = 0, maxshift;
        unsigned int clock_set = 0;
        unsigned long flags;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);

        /* Make sure we're fully resumed: */
        if (unlikely(timekeeping_suspended))
                goto out;

#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
        offset = real_tk->cycle_interval;
#else
        offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
                                   tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
#endif

        /* Check if there's really nothing to do */
        if (offset < real_tk->cycle_interval)
                goto out;

        /* Do some additional sanity checking */
        timekeeping_check_update(tk, offset);

        /*
         * With NO_HZ we may have to accumulate many cycle_intervals
         * (think "ticks") worth of time at once. To do this efficiently,
         * we calculate the largest doubling multiple of cycle_intervals
         * that is smaller than the offset.  We then accumulate that
         * chunk in one go, and then try to consume the next smaller
         * doubled multiple.
         */
        shift = ilog2(offset) - ilog2(tk->cycle_interval);
        shift = max(0, shift);
        /* Bound shift to one less than what overflows tick_length */
        maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
        shift = min(shift, maxshift);
        while (offset >= tk->cycle_interval) {
                offset = logarithmic_accumulation(tk, offset, shift,
                                                        &clock_set);
                if (offset < tk->cycle_interval<<shift)
                        shift--;
        }

        /* correct the clock when NTP error is too big */
        timekeeping_adjust(tk, offset);

        /*
         * XXX This can be killed once everyone converts
         * to the new update_vsyscall.
         */
        old_vsyscall_fixup(tk);

        /*
         * Finally, make sure that after the rounding
         * xtime_nsec isn't larger than NSEC_PER_SEC
         */
        clock_set |= accumulate_nsecs_to_secs(tk);

        write_seqcount_begin(&tk_core.seq);
        /*
         * Update the real timekeeper.
         *
         * We could avoid this memcpy by switching pointers, but that
         * requires changes to all other timekeeper usage sites as
         * well, i.e. move the timekeeper pointer getter into the
         * spinlocked/seqcount protected sections. And we trade this
         * memcpy under the tk_core.seq against one before we start
         * updating.
         */
        timekeeping_update(tk, clock_set);
        memcpy(real_tk, tk, sizeof(*tk));
        /* The memcpy must come last. Do not put anything here! */
        write_seqcount_end(&tk_core.seq);
out:
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
        if (clock_set)
                /* Have to call _delayed version, since in irq context*/
                clock_was_set_delayed();
}

/**
 * getboottime64 - Return the real time of system boot.
 * @ts:         pointer to the timespec64 to be set
 *
 * Returns the wall-time of boot in a timespec64.
 *
 * This is based on the wall_to_monotonic offset and the total suspend
 * time. Calls to settimeofday will affect the value returned (which
 * basically means that however wrong your real time clock is at boot time,
 * you get the right time here).
 */
void getboottime64(struct timespec64 *ts)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        ktime_t t = ktime_sub(tk->offs_real, tk->offs_boot);

        *ts = ktime_to_timespec64(t);
}
EXPORT_SYMBOL_GPL(getboottime64);

unsigned long get_seconds(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;

        return tk->xtime_sec;
}
EXPORT_SYMBOL(get_seconds);

struct timespec __current_kernel_time(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;

        return timespec64_to_timespec(tk_xtime(tk));
}

struct timespec64 current_kernel_time64(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        struct timespec64 now;
        unsigned long seq;

        do {
                seq = read_seqcount_begin(&tk_core.seq);

                now = tk_xtime(tk);
        } while (read_seqcount_retry(&tk_core.seq, seq));

        return now;
}
EXPORT_SYMBOL(current_kernel_time64);

struct timespec64 get_monotonic_coarse64(void)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        struct timespec64 now, mono;
        unsigned long seq;

        do {
                seq = read_seqcount_begin(&tk_core.seq);

                now = tk_xtime(tk);
                mono = tk->wall_to_monotonic;
        } while (read_seqcount_retry(&tk_core.seq, seq));

        set_normalized_timespec64(&now, now.tv_sec + mono.tv_sec,
                                now.tv_nsec + mono.tv_nsec);

        return now;
}
EXPORT_SYMBOL(get_monotonic_coarse64);

/*
 * Must hold jiffies_lock
 */
void do_timer(unsigned long ticks)
{
        jiffies_64 += ticks;
        calc_global_load(ticks);
}

/**
 * ktime_get_update_offsets_now - hrtimer helper
 * @cwsseq:     pointer to check and store the clock was set sequence number
 * @offs_real:  pointer to storage for monotonic -> realtime offset
 * @offs_boot:  pointer to storage for monotonic -> boottime offset
 * @offs_tai:   pointer to storage for monotonic -> clock tai offset
 *
 * Returns current monotonic time and updates the offsets if the
 * sequence number in @cwsseq and timekeeper.clock_was_set_seq are
 * different.
 *
 * Called from hrtimer_interrupt() or retrigger_next_event()
 */
ktime_t ktime_get_update_offsets_now(unsigned int *cwsseq, ktime_t *offs_real,
                                     ktime_t *offs_boot, ktime_t *offs_tai)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned int seq;
        ktime_t base;
        u64 nsecs;

        do {
                seq = read_seqcount_begin(&tk_core.seq);

                base = tk->tkr_mono.base;
                nsecs = timekeeping_get_ns(&tk->tkr_mono);
                base = ktime_add_ns(base, nsecs);

                if (*cwsseq != tk->clock_was_set_seq) {
                        *cwsseq = tk->clock_was_set_seq;
                        *offs_real = tk->offs_real;
                        *offs_boot = tk->offs_boot;
                        *offs_tai = tk->offs_tai;
                }

                /* Handle leapsecond insertion adjustments */
                if (unlikely(base >= tk->next_leap_ktime))
                        *offs_real = ktime_sub(tk->offs_real, ktime_set(1, 0));

        } while (read_seqcount_retry(&tk_core.seq, seq));

        return base;
}

/**
 * do_adjtimex() - Accessor function to NTP __do_adjtimex function
 */
int do_adjtimex(struct timex *txc)
{
        struct timekeeper *tk = &tk_core.timekeeper;
        unsigned long flags;
        struct timespec64 ts;
        s32 orig_tai, tai;
        int ret;

        /* Validate the data before disabling interrupts */
        ret = ntp_validate_timex(txc);
        if (ret)
                return ret;

        if (txc->modes & ADJ_SETOFFSET) {
                struct timespec delta;
                delta.tv_sec  = txc->time.tv_sec;
                delta.tv_nsec = txc->time.tv_usec;
                if (!(txc->modes & ADJ_NANO))
                        delta.tv_nsec *= 1000;
                ret = timekeeping_inject_offset(&delta);
                if (ret)
                        return ret;
        }

        getnstimeofday64(&ts);

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);

        orig_tai = tai = tk->tai_offset;
        ret = __do_adjtimex(txc, &ts, &tai);

        if (tai != orig_tai) {
                __timekeeping_set_tai_offset(tk, tai);
                timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
        }
        tk_update_leap_state(tk);

        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

        if (tai != orig_tai)
                clock_was_set();

        ntp_notify_cmos_timer();

        return ret;
}

#ifdef CONFIG_NTP_PPS
/**
 * hardpps() - Accessor function to NTP __hardpps function
 */
void hardpps(const struct timespec64 *phase_ts, const struct timespec64 *raw_ts)
{
        unsigned long flags;

        raw_spin_lock_irqsave(&timekeeper_lock, flags);
        write_seqcount_begin(&tk_core.seq);

        __hardpps(phase_ts, raw_ts);

        write_seqcount_end(&tk_core.seq);
        raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
}
EXPORT_SYMBOL(hardpps);
#endif /* CONFIG_NTP_PPS */

/**
 * xtime_update() - advances the timekeeping infrastructure
 * @ticks:      number of ticks, that have elapsed since the last call.
 *
 * Must be called with interrupts disabled.
 */
void xtime_update(unsigned long ticks)
{
        write_seqlock(&jiffies_lock);
        do_timer(ticks);
        write_sequnlock(&jiffies_lock);
        update_wall_time();
}