kernel/kgdb.c

   1 /*
   2  * KGDB stub.
   3  *
   4  * Maintainer: Jason Wessel <jason.wessel@windriver.com>
   5  *
   6  * Copyright (C) 2000-2001 VERITAS Software Corporation.
   7  * Copyright (C) 2002-2004 Timesys Corporation
   8  * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
   9  * Copyright (C) 2004 Pavel Machek <pavel@suse.cz>
  10  * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
  11  * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
  12  * Copyright (C) 2005-2008 Wind River Systems, Inc.
  13  * Copyright (C) 2007 MontaVista Software, Inc.
  14  * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  15  *
  16  * Contributors at various stages not listed above:
  17  *  Jason Wessel ( jason.wessel@windriver.com )
  18  *  George Anzinger <george@mvista.com>
  19  *  Anurekh Saxena (anurekh.saxena@timesys.com)
  20  *  Lake Stevens Instrument Division (Glenn Engel)
  21  *  Jim Kingdon, Cygnus Support.
  22  *
  23  * Original KGDB stub: David Grothe <dave@gcom.com>,
  24  * Tigran Aivazian <tigran@sco.com>
  25  *
  26  * This file is licensed under the terms of the GNU General Public License
  27  * version 2. This program is licensed "as is" without any warranty of any
  28  * kind, whether express or implied.
  29  */
  30 #include <linux/pid_namespace.h>
  31 #include <linux/clocksource.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/console.h>
  35 #include <linux/threads.h>
  36 #include <linux/uaccess.h>
  37 #include <linux/kernel.h>
  38 #include <linux/module.h>
  39 #include <linux/ptrace.h>
  40 #include <linux/reboot.h>
  41 #include <linux/string.h>
  42 #include <linux/delay.h>
  43 #include <linux/sched.h>
  44 #include <linux/sysrq.h>
  45 #include <linux/init.h>
  46 #include <linux/kgdb.h>
  47 #include <linux/pid.h>
  48 #include <linux/smp.h>
  49 #include <linux/mm.h>
  50
  51 #include <asm/cacheflush.h>
  52 #include <asm/byteorder.h>
  53 #include <asm/atomic.h>
  54 #include <asm/system.h>
  55
  56 static int kgdb_break_asap;
  57
  58 struct kgdb_state {
  59         int                     ex_vector;
  60         int                     signo;
  61         int                     err_code;
  62         int                     cpu;
  63         int                     pass_exception;
  64         long                    threadid;
  65         long                    kgdb_usethreadid;
  66         struct pt_regs          *linux_regs;
  67 };
  68
  69 static struct debuggerinfo_struct {
  70         void                    *debuggerinfo;
  71         struct task_struct      *task;
  72 } kgdb_info[NR_CPUS];
  73
  74 /**
  75  * kgdb_connected - Is a host GDB connected to us?
  76  */
  77 int                             kgdb_connected;
  78 EXPORT_SYMBOL_GPL(kgdb_connected);
  79
  80 /* All the KGDB handlers are installed */
  81 static int                      kgdb_io_module_registered;
  82
  83 /* Guard for recursive entry */
  84 static int                      exception_level;
  85
  86 static struct kgdb_io           *kgdb_io_ops;
  87 static DEFINE_SPINLOCK(kgdb_registration_lock);
  88
  89 /* kgdb console driver is loaded */
  90 static int kgdb_con_registered;
  91 /* determine if kgdb console output should be used */
  92 static int kgdb_use_con;
  93
  94 static int __init opt_kgdb_con(char *str)
  95 {
  96         kgdb_use_con = 1;
  97         return 0;
  98 }
  99
 100 early_param("kgdbcon", opt_kgdb_con);
 101
 102 module_param(kgdb_use_con, int, 0644);
 103
 104 /*
 105  * Holds information about breakpoints in a kernel. These breakpoints are
 106  * added and removed by gdb.
 107  */
 108 static struct kgdb_bkpt         kgdb_break[KGDB_MAX_BREAKPOINTS] = {
 109         [0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED }
 110 };
 111
 112 /*
 113  * The CPU# of the active CPU, or -1 if none:
 114  */
 115 atomic_t                        kgdb_active = ATOMIC_INIT(-1);
 116
 117 /*
 118  * We use NR_CPUs not PERCPU, in case kgdb is used to debug early
 119  * bootup code (which might not have percpu set up yet):
 120  */
 121 static atomic_t                 passive_cpu_wait[NR_CPUS];
 122 static atomic_t                 cpu_in_kgdb[NR_CPUS];
 123 atomic_t                        kgdb_setting_breakpoint;
 124
 125 struct task_struct              *kgdb_usethread;
 126 struct task_struct              *kgdb_contthread;
 127
 128 int                             kgdb_single_step;
 129
 130 /* Our I/O buffers. */
 131 static char                     remcom_in_buffer[BUFMAX];
 132 static char                     remcom_out_buffer[BUFMAX];
 133
 134 /* Storage for the registers, in GDB format. */
 135 static unsigned long            gdb_regs[(NUMREGBYTES +
 136                                         sizeof(unsigned long) - 1) /
 137                                         sizeof(unsigned long)];
 138
 139 /* to keep track of the CPU which is doing the single stepping*/
 140 atomic_t                        kgdb_cpu_doing_single_step = ATOMIC_INIT(-1);
 141
 142 /*
 143  * If you are debugging a problem where roundup (the collection of
 144  * all other CPUs) is a problem [this should be extremely rare],
 145  * then use the nokgdbroundup option to avoid roundup. In that case
 146  * the other CPUs might interfere with your debugging context, so
 147  * use this with care:
 148  */
 149 int                             kgdb_do_roundup = 1;
 150
 151 static int __init opt_nokgdbroundup(char *str)
 152 {
 153         kgdb_do_roundup = 0;
 154
 155         return 0;
 156 }
 157
 158 early_param("nokgdbroundup", opt_nokgdbroundup);
 159
 160 /*
 161  * Finally, some KGDB code :-)
 162  */
 163
 164 /*
 165  * Weak aliases for breakpoint management,
 166  * can be overriden by architectures when needed:
 167  */
 168 int __weak kgdb_validate_break_address(unsigned long addr)
 169 {
 170         char tmp_variable[BREAK_INSTR_SIZE];
 171
 172         return probe_kernel_read(tmp_variable, (char *)addr, BREAK_INSTR_SIZE);
 173 }
 174
 175 int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
 176 {
 177         int err;
 178
 179         err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE);
 180         if (err)
 181                 return err;
 182
 183         return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
 184                                   BREAK_INSTR_SIZE);
 185 }
 186
 187 int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
 188 {
 189         return probe_kernel_write((char *)addr,
 190                                   (char *)bundle, BREAK_INSTR_SIZE);
 191 }
 192
 193 unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs)
 194 {
 195         return instruction_pointer(regs);
 196 }
 197
 198 int __weak kgdb_arch_init(void)
 199 {
 200         return 0;
 201 }
 202
 203 int __weak kgdb_skipexception(int exception, struct pt_regs *regs)
 204 {
 205         return 0;
 206 }
 207
 208 void __weak
 209 kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
 210 {
 211         return;
 212 }
 213
 214 /**
 215  *      kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
 216  *      @regs: Current &struct pt_regs.
 217  *
 218  *      This function will be called if the particular architecture must
 219  *      disable hardware debugging while it is processing gdb packets or
 220  *      handling exception.
 221  */
 222 void __weak kgdb_disable_hw_debug(struct pt_regs *regs)
 223 {
 224 }
 225
 226 /*
 227  * GDB remote protocol parser:
 228  */
 229
 230 static const char       hexchars[] = "0123456789abcdef";
 231
 232 static int hex(char ch)
 233 {
 234         if ((ch >= 'a') && (ch <= 'f'))
 235                 return ch - 'a' + 10;
 236         if ((ch >= '0') && (ch <= '9'))
 237                 return ch - '0';
 238         if ((ch >= 'A') && (ch <= 'F'))
 239                 return ch - 'A' + 10;
 240         return -1;
 241 }
 242
 243 /* scan for the sequence $<data>#<checksum> */
 244 static void get_packet(char *buffer)
 245 {
 246         unsigned char checksum;
 247         unsigned char xmitcsum;
 248         int count;
 249         char ch;
 250
 251         do {
 252                 /*
 253                  * Spin and wait around for the start character, ignore all
 254                  * other characters:
 255                  */
 256                 while ((ch = (kgdb_io_ops->read_char())) != '$')
 257                         /* nothing */;
 258
 259                 kgdb_connected = 1;
 260                 checksum = 0;
 261                 xmitcsum = -1;
 262
 263                 count = 0;
 264
 265                 /*
 266                  * now, read until a # or end of buffer is found:
 267                  */
 268                 while (count < (BUFMAX - 1)) {
 269                         ch = kgdb_io_ops->read_char();
 270                         if (ch == '#')
 271                                 break;
 272                         checksum = checksum + ch;
 273                         buffer[count] = ch;
 274                         count = count + 1;
 275                 }
 276                 buffer[count] = 0;
 277
 278                 if (ch == '#') {
 279                         xmitcsum = hex(kgdb_io_ops->read_char()) << 4;
 280                         xmitcsum += hex(kgdb_io_ops->read_char());
 281
 282                         if (checksum != xmitcsum)
 283                                 /* failed checksum */
 284                                 kgdb_io_ops->write_char('-');
 285                         else
 286                                 /* successful transfer */
 287                                 kgdb_io_ops->write_char('+');
 288                         if (kgdb_io_ops->flush)
 289                                 kgdb_io_ops->flush();
 290                 }
 291         } while (checksum != xmitcsum);
 292 }
 293
 294 /*
 295  * Send the packet in buffer.
 296  * Check for gdb connection if asked for.
 297  */
 298 static void put_packet(char *buffer)
 299 {
 300         unsigned char checksum;
 301         int count;
 302         char ch;
 303
 304         /*
 305          * $<packet info>#<checksum>.
 306          */
 307         while (1) {
 308                 kgdb_io_ops->write_char('$');
 309                 checksum = 0;
 310                 count = 0;
 311
 312                 while ((ch = buffer[count])) {
 313                         kgdb_io_ops->write_char(ch);
 314                         checksum += ch;
 315                         count++;
 316                 }
 317
 318                 kgdb_io_ops->write_char('#');
 319                 kgdb_io_ops->write_char(hexchars[checksum >> 4]);
 320                 kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
 321                 if (kgdb_io_ops->flush)
 322                         kgdb_io_ops->flush();
 323
 324                 /* Now see what we get in reply. */
 325                 ch = kgdb_io_ops->read_char();
 326
 327                 if (ch == 3)
 328                         ch = kgdb_io_ops->read_char();
 329
 330                 /* If we get an ACK, we are done. */
 331                 if (ch == '+')
 332                         return;
 333
 334                 /*
 335                  * If we get the start of another packet, this means
 336                  * that GDB is attempting to reconnect.  We will NAK
 337                  * the packet being sent, and stop trying to send this
 338                  * packet.
 339                  */
 340                 if (ch == '$') {
 341                         kgdb_io_ops->write_char('-');
 342                         if (kgdb_io_ops->flush)
 343                                 kgdb_io_ops->flush();
 344                         return;
 345                 }
 346         }
 347 }
 348
 349 static char *pack_hex_byte(char *pkt, u8 byte)
 350 {
 351         *pkt++ = hexchars[byte >> 4];
 352         *pkt++ = hexchars[byte & 0xf];
 353
 354         return pkt;
 355 }
 356
 357 /*
 358  * Convert the memory pointed to by mem into hex, placing result in buf.
 359  * Return a pointer to the last char put in buf (null). May return an error.
 360  */
 361 int kgdb_mem2hex(char *mem, char *buf, int count)
 362 {
 363         char *tmp;
 364         int err;
 365
 366         /*
 367          * We use the upper half of buf as an intermediate buffer for the
 368          * raw memory copy.  Hex conversion will work against this one.
 369          */
 370         tmp = buf + count;
 371
 372         err = probe_kernel_read(tmp, mem, count);
 373         if (!err) {
 374                 while (count > 0) {
 375                         buf = pack_hex_byte(buf, *tmp);
 376                         tmp++;
 377                         count--;
 378                 }
 379
 380                 *buf = 0;
 381         }
 382
 383         return err;
 384 }
 385
 386 /*
 387  * Copy the binary array pointed to by buf into mem.  Fix $, #, and
 388  * 0x7d escaped with 0x7d.  Return a pointer to the character after
 389  * the last byte written.
 390  */
 391 static int kgdb_ebin2mem(char *buf, char *mem, int count)
 392 {
 393         int err = 0;
 394         char c;
 395
 396         while (count-- > 0) {
 397                 c = *buf++;
 398                 if (c == 0x7d)
 399                         c = *buf++ ^ 0x20;
 400
 401                 err = probe_kernel_write(mem, &c, 1);
 402                 if (err)
 403                         break;
 404
 405                 mem++;
 406         }
 407
 408         return err;
 409 }
 410
 411 /*
 412  * Convert the hex array pointed to by buf into binary to be placed in mem.
 413  * Return a pointer to the character AFTER the last byte written.
 414  * May return an error.
 415  */
 416 int kgdb_hex2mem(char *buf, char *mem, int count)
 417 {
 418         char *tmp_raw;
 419         char *tmp_hex;
 420
 421         /*
 422          * We use the upper half of buf as an intermediate buffer for the
 423          * raw memory that is converted from hex.
 424          */
 425         tmp_raw = buf + count * 2;
 426
 427         tmp_hex = tmp_raw - 1;
 428         while (tmp_hex >= buf) {
 429                 tmp_raw--;
 430                 *tmp_raw = hex(*tmp_hex--);
 431                 *tmp_raw |= hex(*tmp_hex--) << 4;
 432         }
 433
 434         return probe_kernel_write(mem, tmp_raw, count);
 435 }
 436
 437 /*
 438  * While we find nice hex chars, build a long_val.
 439  * Return number of chars processed.
 440  */
 441 int kgdb_hex2long(char **ptr, long *long_val)
 442 {
 443         int hex_val;
 444         int num = 0;
 445
 446         *long_val = 0;
 447
 448         while (**ptr) {
 449                 hex_val = hex(**ptr);
 450                 if (hex_val < 0)
 451                         break;
 452
 453                 *long_val = (*long_val << 4) | hex_val;
 454                 num++;
 455                 (*ptr)++;
 456         }
 457
 458         return num;
 459 }
 460
 461 /* Write memory due to an 'M' or 'X' packet. */
 462 static int write_mem_msg(int binary)
 463 {
 464         char *ptr = &remcom_in_buffer[1];
 465         unsigned long addr;
 466         unsigned long length;
 467         int err;
 468
 469         if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
 470             kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
 471                 if (binary)
 472                         err = kgdb_ebin2mem(ptr, (char *)addr, length);
 473                 else
 474                         err = kgdb_hex2mem(ptr, (char *)addr, length);
 475                 if (err)
 476                         return err;
 477                 if (CACHE_FLUSH_IS_SAFE)
 478                         flush_icache_range(addr, addr + length + 1);
 479                 return 0;
 480         }
 481
 482         return -EINVAL;
 483 }
 484
 485 static void error_packet(char *pkt, int error)
 486 {
 487         error = -error;
 488         pkt[0] = 'E';
 489         pkt[1] = hexchars[(error / 10)];
 490         pkt[2] = hexchars[(error % 10)];
 491         pkt[3] = '\0';
 492 }
 493
 494 /*
 495  * Thread ID accessors. We represent a flat TID space to GDB, where
 496  * the per CPU idle threads (which under Linux all have PID 0) are
 497  * remapped to negative TIDs.
 498  */
 499
 500 #define BUF_THREAD_ID_SIZE      16
 501
 502 static char *pack_threadid(char *pkt, unsigned char *id)
 503 {
 504         char *limit;
 505
 506         limit = pkt + BUF_THREAD_ID_SIZE;
 507         while (pkt < limit)
 508                 pkt = pack_hex_byte(pkt, *id++);
 509
 510         return pkt;
 511 }
 512
 513 static void int_to_threadref(unsigned char *id, int value)
 514 {
 515         unsigned char *scan;
 516         int i = 4;
 517
 518         scan = (unsigned char *)id;
 519         while (i--)
 520                 *scan++ = 0;
 521         *scan++ = (value >> 24) & 0xff;
 522         *scan++ = (value >> 16) & 0xff;
 523         *scan++ = (value >> 8) & 0xff;
 524         *scan++ = (value & 0xff);
 525 }
 526
 527 static struct task_struct *getthread(struct pt_regs *regs, int tid)
 528 {
 529         /*
 530          * Non-positive TIDs are remapped idle tasks:
 531          */
 532         if (tid <= 0)
 533                 return idle_task(-tid);
 534
 535         /*
 536          * find_task_by_pid_ns() does not take the tasklist lock anymore
 537          * but is nicely RCU locked - hence is a pretty resilient
 538          * thing to use:
 539          */
 540         return find_task_by_pid_ns(tid, &init_pid_ns);
 541 }
 542
 543 /*
 544  * CPU debug state control:
 545  */
 546
 547 #ifdef CONFIG_SMP
 548 static void kgdb_wait(struct pt_regs *regs)
 549 {
 550         unsigned long flags;
 551         int cpu;
 552
 553         local_irq_save(flags);
 554         cpu = raw_smp_processor_id();
 555         kgdb_info[cpu].debuggerinfo = regs;
 556         kgdb_info[cpu].task = current;
 557         /*
 558          * Make sure the above info reaches the primary CPU before
 559          * our cpu_in_kgdb[] flag setting does:
 560          */
 561         smp_wmb();
 562         atomic_set(&cpu_in_kgdb[cpu], 1);
 563
 564         /* Wait till primary CPU is done with debugging */
 565         while (atomic_read(&passive_cpu_wait[cpu]))
 566                 cpu_relax();
 567
 568         kgdb_info[cpu].debuggerinfo = NULL;
 569         kgdb_info[cpu].task = NULL;
 570
 571         /* fix up hardware debug registers on local cpu */
 572         if (arch_kgdb_ops.correct_hw_break)
 573                 arch_kgdb_ops.correct_hw_break();
 574
 575         /* Signal the primary CPU that we are done: */
 576         atomic_set(&cpu_in_kgdb[cpu], 0);
 577         clocksource_touch_watchdog();
 578         local_irq_restore(flags);
 579 }
 580 #endif
 581
 582 /*
 583  * Some architectures need cache flushes when we set/clear a
 584  * breakpoint:
 585  */
 586 static void kgdb_flush_swbreak_addr(unsigned long addr)
 587 {
 588         if (!CACHE_FLUSH_IS_SAFE)
 589                 return;
 590
 591         if (current->mm && current->mm->mmap_cache) {
 592                 flush_cache_range(current->mm->mmap_cache,
 593                                   addr, addr + BREAK_INSTR_SIZE);
 594         }
 595         /* Force flush instruction cache if it was outside the mm */
 596         flush_icache_range(addr, addr + BREAK_INSTR_SIZE);
 597 }
 598
 599 /*
 600  * SW breakpoint management:
 601  */
 602 static int kgdb_activate_sw_breakpoints(void)
 603 {
 604         unsigned long addr;
 605         int error = 0;
 606         int i;
 607
 608         for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 609                 if (kgdb_break[i].state != BP_SET)
 610                         continue;
 611
 612                 addr = kgdb_break[i].bpt_addr;
 613                 error = kgdb_arch_set_breakpoint(addr,
 614                                 kgdb_break[i].saved_instr);
 615                 if (error)
 616                         return error;
 617
 618                 kgdb_flush_swbreak_addr(addr);
 619                 kgdb_break[i].state = BP_ACTIVE;
 620         }
 621         return 0;
 622 }
 623
 624 static int kgdb_set_sw_break(unsigned long addr)
 625 {
 626         int err = kgdb_validate_break_address(addr);
 627         int breakno = -1;
 628         int i;
 629
 630         if (err)
 631                 return err;
 632
 633         for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 634                 if ((kgdb_break[i].state == BP_SET) &&
 635                                         (kgdb_break[i].bpt_addr == addr))
 636                         return -EEXIST;
 637         }
 638         for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 639                 if (kgdb_break[i].state == BP_REMOVED &&
 640                                         kgdb_break[i].bpt_addr == addr) {
 641                         breakno = i;
 642                         break;
 643                 }
 644         }
 645
 646         if (breakno == -1) {
 647                 for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 648                         if (kgdb_break[i].state == BP_UNDEFINED) {
 649                                 breakno = i;
 650                                 break;
 651                         }
 652                 }
 653         }
 654
 655         if (breakno == -1)
 656                 return -E2BIG;
 657
 658         kgdb_break[breakno].state = BP_SET;
 659         kgdb_break[breakno].type = BP_BREAKPOINT;
 660         kgdb_break[breakno].bpt_addr = addr;
 661
 662         return 0;
 663 }
 664
 665 static int kgdb_deactivate_sw_breakpoints(void)
 666 {
 667         unsigned long addr;
 668         int error = 0;
 669         int i;
 670
 671         for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 672                 if (kgdb_break[i].state != BP_ACTIVE)
 673                         continue;
 674                 addr = kgdb_break[i].bpt_addr;
 675                 error = kgdb_arch_remove_breakpoint(addr,
 676                                         kgdb_break[i].saved_instr);
 677                 if (error)
 678                         return error;
 679
 680                 kgdb_flush_swbreak_addr(addr);
 681                 kgdb_break[i].state = BP_SET;
 682         }
 683         return 0;
 684 }
 685
 686 static int kgdb_remove_sw_break(unsigned long addr)
 687 {
 688         int i;
 689
 690         for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 691                 if ((kgdb_break[i].state == BP_SET) &&
 692                                 (kgdb_break[i].bpt_addr == addr)) {
 693                         kgdb_break[i].state = BP_REMOVED;
 694                         return 0;
 695                 }
 696         }
 697         return -ENOENT;
 698 }
 699
 700 int kgdb_isremovedbreak(unsigned long addr)
 701 {
 702         int i;
 703
 704         for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 705                 if ((kgdb_break[i].state == BP_REMOVED) &&
 706                                         (kgdb_break[i].bpt_addr == addr))
 707                         return 1;
 708         }
 709         return 0;
 710 }
 711
 712 int remove_all_break(void)
 713 {
 714         unsigned long addr;
 715         int error;
 716         int i;
 717
 718         /* Clear memory breakpoints. */
 719         for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
 720                 if (kgdb_break[i].state != BP_ACTIVE)
 721                         goto setundefined;
 722                 addr = kgdb_break[i].bpt_addr;
 723                 error = kgdb_arch_remove_breakpoint(addr,
 724                                 kgdb_break[i].saved_instr);
 725                 if (error)
 726                         printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n",
 727                            addr);
 728 setundefined:
 729                 kgdb_break[i].state = BP_UNDEFINED;
 730         }
 731
 732         /* Clear hardware breakpoints. */
 733         if (arch_kgdb_ops.remove_all_hw_break)
 734                 arch_kgdb_ops.remove_all_hw_break();
 735
 736         return 0;
 737 }
 738
 739 /*
 740  * Remap normal tasks to their real PID, idle tasks to -1 ... -NR_CPUs:
 741  */
 742 static inline int shadow_pid(int realpid)
 743 {
 744         if (realpid)
 745                 return realpid;
 746
 747         return -1-raw_smp_processor_id();
 748 }
 749
 750 static char gdbmsgbuf[BUFMAX + 1];
 751
 752 static void kgdb_msg_write(const char *s, int len)
 753 {
 754         char *bufptr;
 755         int wcount;
 756         int i;
 757
 758         /* 'O'utput */
 759         gdbmsgbuf[0] = 'O';
 760
 761         /* Fill and send buffers... */
 762         while (len > 0) {
 763                 bufptr = gdbmsgbuf + 1;
 764
 765                 /* Calculate how many this time */
 766                 if ((len << 1) > (BUFMAX - 2))
 767                         wcount = (BUFMAX - 2) >> 1;
 768                 else
 769                         wcount = len;
 770
 771                 /* Pack in hex chars */
 772                 for (i = 0; i < wcount; i++)
 773                         bufptr = pack_hex_byte(bufptr, s[i]);
 774                 *bufptr = '\0';
 775
 776                 /* Move up */
 777                 s += wcount;
 778                 len -= wcount;
 779
 780                 /* Write packet */
 781                 put_packet(gdbmsgbuf);
 782         }
 783 }
 784
 785 /*
 786  * Return true if there is a valid kgdb I/O module.  Also if no
 787  * debugger is attached a message can be printed to the console about
 788  * waiting for the debugger to attach.
 789  *
 790  * The print_wait argument is only to be true when called from inside
 791  * the core kgdb_handle_exception, because it will wait for the
 792  * debugger to attach.
 793  */
 794 static int kgdb_io_ready(int print_wait)
 795 {
 796         if (!kgdb_io_ops)
 797                 return 0;
 798         if (kgdb_connected)
 799                 return 1;
 800         if (atomic_read(&kgdb_setting_breakpoint))
 801                 return 1;
 802         if (print_wait)
 803                 printk(KERN_CRIT "KGDB: Waiting for remote debugger\n");
 804         return 1;
 805 }
 806
 807 /*
 808  * All the functions that start with gdb_cmd are the various
 809  * operations to implement the handlers for the gdbserial protocol
 810  * where KGDB is communicating with an external debugger
 811  */
 812
 813 /* Handle the '?' status packets */
 814 static void gdb_cmd_status(struct kgdb_state *ks)
 815 {
 816         /*
 817          * We know that this packet is only sent
 818          * during initial connect.  So to be safe,
 819          * we clear out our breakpoints now in case
 820          * GDB is reconnecting.
 821          */
 822         remove_all_break();
 823
 824         remcom_out_buffer[0] = 'S';
 825         pack_hex_byte(&remcom_out_buffer[1], ks->signo);
 826 }
 827
 828 /* Handle the 'g' get registers request */
 829 static void gdb_cmd_getregs(struct kgdb_state *ks)
 830 {
 831         struct task_struct *thread;
 832         void *local_debuggerinfo;
 833         int i;
 834
 835         thread = kgdb_usethread;
 836         if (!thread) {
 837                 thread = kgdb_info[ks->cpu].task;
 838                 local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
 839         } else {
 840                 local_debuggerinfo = NULL;
 841                 for (i = 0; i < NR_CPUS; i++) {
 842                         /*
 843                          * Try to find the task on some other
 844                          * or possibly this node if we do not
 845                          * find the matching task then we try
 846                          * to approximate the results.
 847                          */
 848                         if (thread == kgdb_info[i].task)
 849                                 local_debuggerinfo = kgdb_info[i].debuggerinfo;
 850                 }
 851         }
 852
 853         /*
 854          * All threads that don't have debuggerinfo should be
 855          * in __schedule() sleeping, since all other CPUs
 856          * are in kgdb_wait, and thus have debuggerinfo.
 857          */
 858         if (local_debuggerinfo) {
 859                 pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
 860         } else {
 861                 /*
 862                  * Pull stuff saved during switch_to; nothing
 863                  * else is accessible (or even particularly
 864                  * relevant).
 865                  *
 866                  * This should be enough for a stack trace.
 867                  */
 868                 sleeping_thread_to_gdb_regs(gdb_regs, thread);
 869         }
 870         kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
 871 }
 872
 873 /* Handle the 'G' set registers request */
 874 static void gdb_cmd_setregs(struct kgdb_state *ks)
 875 {
 876         kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
 877
 878         if (kgdb_usethread && kgdb_usethread != current) {
 879                 error_packet(remcom_out_buffer, -EINVAL);
 880         } else {
 881                 gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
 882                 strcpy(remcom_out_buffer, "OK");
 883         }
 884 }
 885
 886 /* Handle the 'm' memory read bytes */
 887 static void gdb_cmd_memread(struct kgdb_state *ks)
 888 {
 889         char *ptr = &remcom_in_buffer[1];
 890         unsigned long length;
 891         unsigned long addr;
 892         int err;
 893
 894         if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
 895                                         kgdb_hex2long(&ptr, &length) > 0) {
 896                 err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
 897                 if (err)
 898                         error_packet(remcom_out_buffer, err);
 899         } else {
 900                 error_packet(remcom_out_buffer, -EINVAL);
 901         }
 902 }
 903
 904 /* Handle the 'M' memory write bytes */
 905 static void gdb_cmd_memwrite(struct kgdb_state *ks)
 906 {
 907         int err = write_mem_msg(0);
 908
 909         if (err)
 910                 error_packet(remcom_out_buffer, err);
 911         else
 912                 strcpy(remcom_out_buffer, "OK");
 913 }
 914
 915 /* Handle the 'X' memory binary write bytes */
 916 static void gdb_cmd_binwrite(struct kgdb_state *ks)
 917 {
 918         int err = write_mem_msg(1);
 919
 920         if (err)
 921                 error_packet(remcom_out_buffer, err);
 922         else
 923                 strcpy(remcom_out_buffer, "OK");
 924 }
 925
 926 /* Handle the 'D' or 'k', detach or kill packets */
 927 static void gdb_cmd_detachkill(struct kgdb_state *ks)
 928 {
 929         int error;
 930
 931         /* The detach case */
 932         if (remcom_in_buffer[0] == 'D') {
 933                 error = remove_all_break();
 934                 if (error < 0) {
 935                         error_packet(remcom_out_buffer, error);
 936                 } else {
 937                         strcpy(remcom_out_buffer, "OK");
 938                         kgdb_connected = 0;
 939                 }
 940                 put_packet(remcom_out_buffer);
 941         } else {
 942                 /*
 943                  * Assume the kill case, with no exit code checking,
 944                  * trying to force detach the debugger:
 945                  */
 946                 remove_all_break();
 947                 kgdb_connected = 0;
 948         }
 949 }
 950
 951 /* Handle the 'R' reboot packets */
 952 static int gdb_cmd_reboot(struct kgdb_state *ks)
 953 {
 954         /* For now, only honor R0 */
 955         if (strcmp(remcom_in_buffer, "R0") == 0) {
 956                 printk(KERN_CRIT "Executing emergency reboot\n");
 957                 strcpy(remcom_out_buffer, "OK");
 958                 put_packet(remcom_out_buffer);
 959
 960                 /*
 961                  * Execution should not return from
 962                  * machine_emergency_restart()
 963                  */
 964                 machine_emergency_restart();
 965                 kgdb_connected = 0;
 966
 967                 return 1;
 968         }
 969         return 0;
 970 }
 971
 972 /* Handle the 'q' query packets */
 973 static void gdb_cmd_query(struct kgdb_state *ks)
 974 {
 975         struct task_struct *thread;
 976         unsigned char thref[8];
 977         char *ptr;
 978         int i;
 979
 980         switch (remcom_in_buffer[1]) {
 981         case 's':
 982         case 'f':
 983                 if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
 984                         error_packet(remcom_out_buffer, -EINVAL);
 985                         break;
 986                 }
 987
 988                 if (remcom_in_buffer[1] == 'f')
 989                         ks->threadid = 1;
 990
 991                 remcom_out_buffer[0] = 'm';
 992                 ptr = remcom_out_buffer + 1;
 993
 994                 for (i = 0; i < 17; ks->threadid++) {
 995                         thread = getthread(ks->linux_regs, ks->threadid);
 996                         if (thread) {
 997                                 int_to_threadref(thref, ks->threadid);
 998                                 pack_threadid(ptr, thref);
 999                                 ptr += BUF_THREAD_ID_SIZE;
1000                                 *(ptr++) = ',';
1001                                 i++;
1002                         }
1003                 }
1004                 *(--ptr) = '\0';
1005                 break;
1006
1007         case 'C':
1008                 /* Current thread id */
1009                 strcpy(remcom_out_buffer, "QC");
1010                 ks->threadid = shadow_pid(current->pid);
1011                 int_to_threadref(thref, ks->threadid);
1012                 pack_threadid(remcom_out_buffer + 2, thref);
1013                 break;
1014         case 'T':
1015                 if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
1016                         error_packet(remcom_out_buffer, -EINVAL);
1017                         break;
1018                 }
1019                 ks->threadid = 0;
1020                 ptr = remcom_in_buffer + 17;
1021                 kgdb_hex2long(&ptr, &ks->threadid);
1022                 if (!getthread(ks->linux_regs, ks->threadid)) {
1023                         error_packet(remcom_out_buffer, -EINVAL);
1024                         break;
1025                 }
1026                 if (ks->threadid > 0) {
1027                         kgdb_mem2hex(getthread(ks->linux_regs,
1028                                         ks->threadid)->comm,
1029                                         remcom_out_buffer, 16);
1030                 } else {
1031                         static char tmpstr[23 + BUF_THREAD_ID_SIZE];
1032
1033                         sprintf(tmpstr, "Shadow task %d for pid 0",
1034                                         (int)(-ks->threadid-1));
1035                         kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
1036                 }
1037                 break;
1038         }
1039 }
1040
1041 /* Handle the 'H' task query packets */
1042 static void gdb_cmd_task(struct kgdb_state *ks)
1043 {
1044         struct task_struct *thread;
1045         char *ptr;
1046
1047         switch (remcom_in_buffer[1]) {
1048         case 'g':
1049                 ptr = &remcom_in_buffer[2];
1050                 kgdb_hex2long(&ptr, &ks->threadid);
1051                 thread = getthread(ks->linux_regs, ks->threadid);
1052                 if (!thread && ks->threadid > 0) {
1053                         error_packet(remcom_out_buffer, -EINVAL);
1054                         break;
1055                 }
1056                 kgdb_usethread = thread;
1057                 ks->kgdb_usethreadid = ks->threadid;
1058                 strcpy(remcom_out_buffer, "OK");
1059                 break;
1060         case 'c':
1061                 ptr = &remcom_in_buffer[2];
1062                 kgdb_hex2long(&ptr, &ks->threadid);
1063                 if (!ks->threadid) {
1064                         kgdb_contthread = NULL;
1065                 } else {
1066                         thread = getthread(ks->linux_regs, ks->threadid);
1067                         if (!thread && ks->threadid > 0) {
1068                                 error_packet(remcom_out_buffer, -EINVAL);
1069                                 break;
1070                         }
1071                         kgdb_contthread = thread;
1072                 }
1073                 strcpy(remcom_out_buffer, "OK");
1074                 break;
1075         }
1076 }
1077
1078 /* Handle the 'T' thread query packets */
1079 static void gdb_cmd_thread(struct kgdb_state *ks)
1080 {
1081         char *ptr = &remcom_in_buffer[1];
1082         struct task_struct *thread;
1083
1084         kgdb_hex2long(&ptr, &ks->threadid);
1085         thread = getthread(ks->linux_regs, ks->threadid);
1086         if (thread)
1087                 strcpy(remcom_out_buffer, "OK");
1088         else
1089                 error_packet(remcom_out_buffer, -EINVAL);
1090 }
1091
1092 /* Handle the 'z' or 'Z' breakpoint remove or set packets */
1093 static void gdb_cmd_break(struct kgdb_state *ks)
1094 {
1095         /*
1096          * Since GDB-5.3, it's been drafted that '0' is a software
1097          * breakpoint, '1' is a hardware breakpoint, so let's do that.
1098          */
1099         char *bpt_type = &remcom_in_buffer[1];
1100         char *ptr = &remcom_in_buffer[2];
1101         unsigned long addr;
1102         unsigned long length;
1103         int error = 0;
1104
1105         if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
1106                 /* Unsupported */
1107                 if (*bpt_type > '4')
1108                         return;
1109         } else {
1110                 if (*bpt_type != '0' && *bpt_type != '1')
1111                         /* Unsupported. */
1112                         return;
1113         }
1114
1115         /*
1116          * Test if this is a hardware breakpoint, and
1117          * if we support it:
1118          */
1119         if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
1120                 /* Unsupported. */
1121                 return;
1122
1123         if (*(ptr++) != ',') {
1124                 error_packet(remcom_out_buffer, -EINVAL);
1125                 return;
1126         }
1127         if (!kgdb_hex2long(&ptr, &addr)) {
1128                 error_packet(remcom_out_buffer, -EINVAL);
1129                 return;
1130         }
1131         if (*(ptr++) != ',' ||
1132                 !kgdb_hex2long(&ptr, &length)) {
1133                 error_packet(remcom_out_buffer, -EINVAL);
1134                 return;
1135         }
1136
1137         if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
1138                 error = kgdb_set_sw_break(addr);
1139         else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
1140                 error = kgdb_remove_sw_break(addr);
1141         else if (remcom_in_buffer[0] == 'Z')
1142                 error = arch_kgdb_ops.set_hw_breakpoint(addr,
1143                         (int)length, *bpt_type - '0');
1144         else if (remcom_in_buffer[0] == 'z')
1145                 error = arch_kgdb_ops.remove_hw_breakpoint(addr,
1146                         (int) length, *bpt_type - '0');
1147
1148         if (error == 0)
1149                 strcpy(remcom_out_buffer, "OK");
1150         else
1151                 error_packet(remcom_out_buffer, error);
1152 }
1153
1154 /* Handle the 'C' signal / exception passing packets */
1155 static int gdb_cmd_exception_pass(struct kgdb_state *ks)
1156 {
1157         /* C09 == pass exception
1158          * C15 == detach kgdb, pass exception
1159          */
1160         if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
1161
1162                 ks->pass_exception = 1;
1163                 remcom_in_buffer[0] = 'c';
1164
1165         } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
1166
1167                 ks->pass_exception = 1;
1168                 remcom_in_buffer[0] = 'D';
1169                 remove_all_break();
1170                 kgdb_connected = 0;
1171                 return 1;
1172
1173         } else {
1174                 error_packet(remcom_out_buffer, -EINVAL);
1175                 return 0;
1176         }
1177
1178         /* Indicate fall through */
1179         return -1;
1180 }
1181
1182 /*
1183  * This function performs all gdbserial command procesing
1184  */
1185 static int gdb_serial_stub(struct kgdb_state *ks)
1186 {
1187         int error = 0;
1188         int tmp;
1189
1190         /* Clear the out buffer. */
1191         memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
1192
1193         if (kgdb_connected) {
1194                 unsigned char thref[8];
1195                 char *ptr;
1196
1197                 /* Reply to host that an exception has occurred */
1198                 ptr = remcom_out_buffer;
1199                 *ptr++ = 'T';
1200                 ptr = pack_hex_byte(ptr, ks->signo);
1201                 ptr += strlen(strcpy(ptr, "thread:"));
1202                 int_to_threadref(thref, shadow_pid(current->pid));
1203                 ptr = pack_threadid(ptr, thref);
1204                 *ptr++ = ';';
1205                 put_packet(remcom_out_buffer);
1206         }
1207
1208         kgdb_usethread = kgdb_info[ks->cpu].task;
1209         ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
1210         ks->pass_exception = 0;
1211
1212         while (1) {
1213                 error = 0;
1214
1215                 /* Clear the out buffer. */
1216                 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
1217
1218                 get_packet(remcom_in_buffer);
1219
1220                 switch (remcom_in_buffer[0]) {
1221                 case '?': /* gdbserial status */
1222                         gdb_cmd_status(ks);
1223                         break;
1224                 case 'g': /* return the value of the CPU registers */
1225                         gdb_cmd_getregs(ks);
1226                         break;
1227                 case 'G': /* set the value of the CPU registers - return OK */
1228                         gdb_cmd_setregs(ks);
1229                         break;
1230                 case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
1231                         gdb_cmd_memread(ks);
1232                         break;
1233                 case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1234                         gdb_cmd_memwrite(ks);
1235                         break;
1236                 case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1237                         gdb_cmd_binwrite(ks);
1238                         break;
1239                         /* kill or detach. KGDB should treat this like a
1240                          * continue.
1241                          */
1242                 case 'D': /* Debugger detach */
1243                 case 'k': /* Debugger detach via kill */
1244                         gdb_cmd_detachkill(ks);
1245                         goto default_handle;
1246                 case 'R': /* Reboot */
1247                         if (gdb_cmd_reboot(ks))
1248                                 goto default_handle;
1249                         break;
1250                 case 'q': /* query command */
1251                         gdb_cmd_query(ks);
1252                         break;
1253                 case 'H': /* task related */
1254                         gdb_cmd_task(ks);
1255                         break;
1256                 case 'T': /* Query thread status */
1257                         gdb_cmd_thread(ks);
1258                         break;
1259                 case 'z': /* Break point remove */
1260                 case 'Z': /* Break point set */
1261                         gdb_cmd_break(ks);
1262                         break;
1263                 case 'C': /* Exception passing */
1264                         tmp = gdb_cmd_exception_pass(ks);
1265                         if (tmp > 0)
1266                                 goto default_handle;
1267                         if (tmp == 0)
1268                                 break;
1269                         /* Fall through on tmp < 0 */
1270                 case 'c': /* Continue packet */
1271                 case 's': /* Single step packet */
1272                         if (kgdb_contthread && kgdb_contthread != current) {
1273                                 /* Can't switch threads in kgdb */
1274                                 error_packet(remcom_out_buffer, -EINVAL);
1275                                 break;
1276                         }
1277                         kgdb_activate_sw_breakpoints();
1278                         /* Fall through to default processing */
1279                 default:
1280 default_handle:
1281                         error = kgdb_arch_handle_exception(ks->ex_vector,
1282                                                 ks->signo,
1283                                                 ks->err_code,
1284                                                 remcom_in_buffer,
1285                                                 remcom_out_buffer,
1286                                                 ks->linux_regs);
1287                         /*
1288                          * Leave cmd processing on error, detach,
1289                          * kill, continue, or single step.
1290                          */
1291                         if (error >= 0 || remcom_in_buffer[0] == 'D' ||
1292                             remcom_in_buffer[0] == 'k') {
1293                                 error = 0;
1294                                 goto kgdb_exit;
1295                         }
1296
1297                 }
1298
1299                 /* reply to the request */
1300                 put_packet(remcom_out_buffer);
1301         }
1302
1303 kgdb_exit:
1304         if (ks->pass_exception)
1305                 error = 1;
1306         return error;
1307 }
1308
1309 static int kgdb_reenter_check(struct kgdb_state *ks)
1310 {
1311         unsigned long addr;
1312
1313         if (atomic_read(&kgdb_active) != raw_smp_processor_id())
1314                 return 0;
1315
1316         /* Panic on recursive debugger calls: */
1317         exception_level++;
1318         addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs);
1319         kgdb_deactivate_sw_breakpoints();
1320
1321         /*
1322          * If the break point removed ok at the place exception
1323          * occurred, try to recover and print a warning to the end
1324          * user because the user planted a breakpoint in a place that
1325          * KGDB needs in order to function.
1326          */
1327         if (kgdb_remove_sw_break(addr) == 0) {
1328                 exception_level = 0;
1329                 kgdb_skipexception(ks->ex_vector, ks->linux_regs);
1330                 kgdb_activate_sw_breakpoints();
1331                 printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n",
1332                         addr);
1333                 WARN_ON_ONCE(1);
1334
1335                 return 1;
1336         }
1337         remove_all_break();
1338         kgdb_skipexception(ks->ex_vector, ks->linux_regs);
1339
1340         if (exception_level > 1) {
1341                 dump_stack();
1342                 panic("Recursive entry to debugger");
1343         }
1344
1345         printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n");
1346         dump_stack();
1347         panic("Recursive entry to debugger");
1348
1349         return 1;
1350 }
1351
1352 /*
1353  * kgdb_handle_exception() - main entry point from a kernel exception
1354  *
1355  * Locking hierarchy:
1356  *      interface locks, if any (begin_session)
1357  *      kgdb lock (kgdb_active)
1358  */
1359 int
1360 kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
1361 {
1362         struct kgdb_state kgdb_var;
1363         struct kgdb_state *ks = &kgdb_var;
1364         unsigned long flags;
1365         int error = 0;
1366         int i, cpu;
1367
1368         ks->cpu                 = raw_smp_processor_id();
1369         ks->ex_vector           = evector;
1370         ks->signo               = signo;
1371         ks->ex_vector           = evector;
1372         ks->err_code            = ecode;
1373         ks->kgdb_usethreadid    = 0;
1374         ks->linux_regs          = regs;
1375
1376         if (kgdb_reenter_check(ks))
1377                 return 0; /* Ouch, double exception ! */
1378
1379 acquirelock:
1380         /*
1381          * Interrupts will be restored by the 'trap return' code, except when
1382          * single stepping.
1383          */
1384         local_irq_save(flags);
1385
1386         cpu = raw_smp_processor_id();
1387
1388         /*
1389          * Acquire the kgdb_active lock:
1390          */
1391         while (atomic_cmpxchg(&kgdb_active, -1, cpu) != -1)
1392                 cpu_relax();
1393
1394         /*
1395          * Do not start the debugger connection on this CPU if the last
1396          * instance of the exception handler wanted to come into the
1397          * debugger on a different CPU via a single step
1398          */
1399         if (atomic_read(&kgdb_cpu_doing_single_step) != -1 &&
1400             atomic_read(&kgdb_cpu_doing_single_step) != cpu) {
1401
1402                 atomic_set(&kgdb_active, -1);
1403                 clocksource_touch_watchdog();
1404                 local_irq_restore(flags);
1405
1406                 goto acquirelock;
1407         }
1408
1409         if (!kgdb_io_ready(1)) {
1410                 error = 1;
1411                 goto kgdb_restore; /* No I/O connection, so resume the system */
1412         }
1413
1414         /*
1415          * Don't enter if we have hit a removed breakpoint.
1416          */
1417         if (kgdb_skipexception(ks->ex_vector, ks->linux_regs))
1418                 goto kgdb_restore;
1419
1420         /* Call the I/O driver's pre_exception routine */
1421         if (kgdb_io_ops->pre_exception)
1422                 kgdb_io_ops->pre_exception();
1423
1424         kgdb_info[ks->cpu].debuggerinfo = ks->linux_regs;
1425         kgdb_info[ks->cpu].task = current;
1426
1427         kgdb_disable_hw_debug(ks->linux_regs);
1428
1429         /*
1430          * Get the passive CPU lock which will hold all the non-primary
1431          * CPU in a spin state while the debugger is active
1432          */
1433         if (!kgdb_single_step || !kgdb_contthread) {
1434                 for (i = 0; i < NR_CPUS; i++)
1435                         atomic_set(&passive_cpu_wait[i], 1);
1436         }
1437
1438         /*
1439          * spin_lock code is good enough as a barrier so we don't
1440          * need one here:
1441          */
1442         atomic_set(&cpu_in_kgdb[ks->cpu], 1);
1443
1444 #ifdef CONFIG_SMP
1445         /* Signal the other CPUs to enter kgdb_wait() */
1446         if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup)
1447                 kgdb_roundup_cpus(flags);
1448 #endif
1449
1450         /*
1451          * Wait for the other CPUs to be notified and be waiting for us:
1452          */
1453         for_each_online_cpu(i) {
1454                 while (!atomic_read(&cpu_in_kgdb[i]))
1455                         cpu_relax();
1456         }
1457
1458         /*
1459          * At this point the primary processor is completely
1460          * in the debugger and all secondary CPUs are quiescent
1461          */
1462         kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code);
1463         kgdb_deactivate_sw_breakpoints();
1464         kgdb_single_step = 0;
1465         kgdb_contthread = NULL;
1466         exception_level = 0;
1467
1468         /* Talk to debugger with gdbserial protocol */
1469         error = gdb_serial_stub(ks);
1470
1471         /* Call the I/O driver's post_exception routine */
1472         if (kgdb_io_ops->post_exception)
1473                 kgdb_io_ops->post_exception();
1474
1475         kgdb_info[ks->cpu].debuggerinfo = NULL;
1476         kgdb_info[ks->cpu].task = NULL;
1477         atomic_set(&cpu_in_kgdb[ks->cpu], 0);
1478
1479         if (!kgdb_single_step || !kgdb_contthread) {
1480                 for (i = NR_CPUS-1; i >= 0; i--)
1481                         atomic_set(&passive_cpu_wait[i], 0);
1482                 /*
1483                  * Wait till all the CPUs have quit
1484                  * from the debugger.
1485                  */
1486                 for_each_online_cpu(i) {
1487                         while (atomic_read(&cpu_in_kgdb[i]))
1488                                 cpu_relax();
1489                 }
1490         }
1491
1492 kgdb_restore:
1493         /* Free kgdb_active */
1494         atomic_set(&kgdb_active, -1);
1495         clocksource_touch_watchdog();
1496         local_irq_restore(flags);
1497
1498         return error;
1499 }
1500
1501 int kgdb_nmicallback(int cpu, void *regs)
1502 {
1503 #ifdef CONFIG_SMP
1504         if (!atomic_read(&cpu_in_kgdb[cpu]) &&
1505                         atomic_read(&kgdb_active) != cpu &&
1506                         atomic_read(&cpu_in_kgdb[atomic_read(&kgdb_active)])) {
1507                 kgdb_wait((struct pt_regs *)regs);
1508                 return 0;
1509         }
1510 #endif
1511         return 1;
1512 }
1513
1514 void kgdb_console_write(struct console *co, const char *s, unsigned count)
1515 {
1516         unsigned long flags;
1517
1518         /* If we're debugging, or KGDB has not connected, don't try
1519          * and print. */
1520         if (!kgdb_connected || atomic_read(&kgdb_active) != -1)
1521                 return;
1522
1523         local_irq_save(flags);
1524         kgdb_msg_write(s, count);
1525         local_irq_restore(flags);
1526 }
1527
1528 static struct console kgdbcons = {
1529         .name           = "kgdb",
1530         .write          = kgdb_console_write,
1531         .flags          = CON_PRINTBUFFER | CON_ENABLED,
1532         .index          = -1,
1533 };
1534
1535 #ifdef CONFIG_MAGIC_SYSRQ
1536 static void sysrq_handle_gdb(int key, struct tty_struct *tty)
1537 {
1538         if (!kgdb_io_ops) {
1539                 printk(KERN_CRIT "ERROR: No KGDB I/O module available\n");
1540                 return;
1541         }
1542         if (!kgdb_connected)
1543                 printk(KERN_CRIT "Entering KGDB\n");
1544
1545         kgdb_breakpoint();
1546 }
1547
1548 static struct sysrq_key_op sysrq_gdb_op = {
1549         .handler        = sysrq_handle_gdb,
1550         .help_msg       = "Gdb",
1551         .action_msg     = "GDB",
1552 };
1553 #endif
1554
1555 static void kgdb_register_callbacks(void)
1556 {
1557         if (!kgdb_io_module_registered) {
1558                 kgdb_io_module_registered = 1;
1559                 kgdb_arch_init();
1560 #ifdef CONFIG_MAGIC_SYSRQ
1561                 register_sysrq_key('g', &sysrq_gdb_op);
1562 #endif
1563                 if (kgdb_use_con && !kgdb_con_registered) {
1564                         register_console(&kgdbcons);
1565                         kgdb_con_registered = 1;
1566                 }
1567         }
1568 }
1569
1570 static void kgdb_unregister_callbacks(void)
1571 {
1572         /*
1573          * When this routine is called KGDB should unregister from the
1574          * panic handler and clean up, making sure it is not handling any
1575          * break exceptions at the time.
1576          */
1577         if (kgdb_io_module_registered) {
1578                 kgdb_io_module_registered = 0;
1579                 kgdb_arch_exit();
1580 #ifdef CONFIG_MAGIC_SYSRQ
1581                 unregister_sysrq_key('g', &sysrq_gdb_op);
1582 #endif
1583                 if (kgdb_con_registered) {
1584                         unregister_console(&kgdbcons);
1585                         kgdb_con_registered = 0;
1586                 }
1587         }
1588 }
1589
1590 static void kgdb_initial_breakpoint(void)
1591 {
1592         kgdb_break_asap = 0;
1593
1594         printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n");
1595         kgdb_breakpoint();
1596 }
1597
1598 /**
1599  *      kgdb_register_io_module - register KGDB IO module
1600  *      @new_kgdb_io_ops: the io ops vector
1601  *
1602  *      Register it with the KGDB core.
1603  */
1604 int kgdb_register_io_module(struct kgdb_io *new_kgdb_io_ops)
1605 {
1606         int err;
1607
1608         spin_lock(&kgdb_registration_lock);
1609
1610         if (kgdb_io_ops) {
1611                 spin_unlock(&kgdb_registration_lock);
1612
1613                 printk(KERN_ERR "kgdb: Another I/O driver is already "
1614                                 "registered with KGDB.\n");
1615                 return -EBUSY;
1616         }
1617
1618         if (new_kgdb_io_ops->init) {
1619                 err = new_kgdb_io_ops->init();
1620                 if (err) {
1621                         spin_unlock(&kgdb_registration_lock);
1622                         return err;
1623                 }
1624         }
1625
1626         kgdb_io_ops = new_kgdb_io_ops;
1627
1628         spin_unlock(&kgdb_registration_lock);
1629
1630         printk(KERN_INFO "kgdb: Registered I/O driver %s.\n",
1631                new_kgdb_io_ops->name);
1632
1633         /* Arm KGDB now. */
1634         kgdb_register_callbacks();
1635
1636         if (kgdb_break_asap)
1637                 kgdb_initial_breakpoint();
1638
1639         return 0;
1640 }
1641 EXPORT_SYMBOL_GPL(kgdb_register_io_module);
1642
1643 /**
1644  *      kkgdb_unregister_io_module - unregister KGDB IO module
1645  *      @old_kgdb_io_ops: the io ops vector
1646  *
1647  *      Unregister it with the KGDB core.
1648  */
1649 void kgdb_unregister_io_module(struct kgdb_io *old_kgdb_io_ops)
1650 {
1651         BUG_ON(kgdb_connected);
1652
1653         /*
1654          * KGDB is no longer able to communicate out, so
1655          * unregister our callbacks and reset state.
1656          */
1657         kgdb_unregister_callbacks();
1658
1659         spin_lock(&kgdb_registration_lock);
1660
1661         WARN_ON_ONCE(kgdb_io_ops != old_kgdb_io_ops);
1662         kgdb_io_ops = NULL;
1663
1664         spin_unlock(&kgdb_registration_lock);
1665
1666         printk(KERN_INFO
1667                 "kgdb: Unregistered I/O driver %s, debugger disabled.\n",
1668                 old_kgdb_io_ops->name);
1669 }
1670 EXPORT_SYMBOL_GPL(kgdb_unregister_io_module);
1671
1672 /**
1673  * kgdb_breakpoint - generate breakpoint exception
1674  *
1675  * This function will generate a breakpoint exception.  It is used at the
1676  * beginning of a program to sync up with a debugger and can be used
1677  * otherwise as a quick means to stop program execution and "break" into
1678  * the debugger.
1679  */
1680 void kgdb_breakpoint(void)
1681 {
1682         atomic_set(&kgdb_setting_breakpoint, 1);
1683         wmb(); /* Sync point before breakpoint */
1684         arch_kgdb_breakpoint();
1685         wmb(); /* Sync point after breakpoint */
1686         atomic_set(&kgdb_setting_breakpoint, 0);
1687 }
1688 EXPORT_SYMBOL_GPL(kgdb_breakpoint);
1689
1690 static int __init opt_kgdb_wait(char *str)
1691 {
1692         kgdb_break_asap = 1;
1693
1694         if (kgdb_io_module_registered)
1695                 kgdb_initial_breakpoint();
1696
1697         return 0;
1698 }
1699
1700 early_param("kgdbwait", opt_kgdb_wait);