Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek...
[sfrench/cifs-2.6.git] / include / linux / serial_8250.h
1 /*
2  *  linux/include/linux/serial_8250.h
3  *
4  *  Copyright (C) 2004 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  */
11 #ifndef _LINUX_SERIAL_8250_H
12 #define _LINUX_SERIAL_8250_H
13
14 #include <linux/serial_core.h>
15 #include <linux/serial_reg.h>
16 #include <linux/platform_device.h>
17
18 /*
19  * This is the platform device platform_data structure
20  */
21 struct plat_serial8250_port {
22         unsigned long   iobase;         /* io base address */
23         void __iomem    *membase;       /* ioremap cookie or NULL */
24         resource_size_t mapbase;        /* resource base */
25         unsigned int    irq;            /* interrupt number */
26         unsigned long   irqflags;       /* request_irq flags */
27         unsigned int    uartclk;        /* UART clock rate */
28         void            *private_data;
29         unsigned char   regshift;       /* register shift */
30         unsigned char   iotype;         /* UPIO_* */
31         unsigned char   hub6;
32         upf_t           flags;          /* UPF_* flags */
33         unsigned int    type;           /* If UPF_FIXED_TYPE */
34         unsigned int    (*serial_in)(struct uart_port *, int);
35         void            (*serial_out)(struct uart_port *, int, int);
36         void            (*set_termios)(struct uart_port *,
37                                        struct ktermios *new,
38                                        struct ktermios *old);
39         void            (*set_ldisc)(struct uart_port *,
40                                      struct ktermios *);
41         unsigned int    (*get_mctrl)(struct uart_port *);
42         int             (*handle_irq)(struct uart_port *);
43         void            (*pm)(struct uart_port *, unsigned int state,
44                               unsigned old);
45         void            (*handle_break)(struct uart_port *);
46 };
47
48 /*
49  * Allocate 8250 platform device IDs.  Nothing is implied by
50  * the numbering here, except for the legacy entry being -1.
51  */
52 enum {
53         PLAT8250_DEV_LEGACY = -1,
54         PLAT8250_DEV_PLATFORM,
55         PLAT8250_DEV_PLATFORM1,
56         PLAT8250_DEV_PLATFORM2,
57         PLAT8250_DEV_FOURPORT,
58         PLAT8250_DEV_ACCENT,
59         PLAT8250_DEV_BOCA,
60         PLAT8250_DEV_EXAR_ST16C554,
61         PLAT8250_DEV_HUB6,
62         PLAT8250_DEV_AU1X00,
63         PLAT8250_DEV_SM501,
64 };
65
66 struct uart_8250_dma;
67 struct uart_8250_port;
68
69 /**
70  * 8250 core driver operations
71  *
72  * @setup_irq()         Setup irq handling. The universal 8250 driver links this
73  *                      port to the irq chain. Other drivers may @request_irq().
74  * @release_irq()       Undo irq handling. The universal 8250 driver unlinks
75  *                      the port from the irq chain.
76  */
77 struct uart_8250_ops {
78         int             (*setup_irq)(struct uart_8250_port *);
79         void            (*release_irq)(struct uart_8250_port *);
80 };
81
82 struct uart_8250_em485 {
83         struct hrtimer          start_tx_timer; /* "rs485 start tx" timer */
84         struct hrtimer          stop_tx_timer;  /* "rs485 stop tx" timer */
85         struct hrtimer          *active_timer;  /* pointer to active timer */
86         struct uart_8250_port   *port;          /* for hrtimer callbacks */
87 };
88
89 /*
90  * This should be used by drivers which want to register
91  * their own 8250 ports without registering their own
92  * platform device.  Using these will make your driver
93  * dependent on the 8250 driver.
94  */
95
96 struct uart_8250_port {
97         struct uart_port        port;
98         struct timer_list       timer;          /* "no irq" timer */
99         struct list_head        list;           /* ports on this IRQ */
100         u32                     capabilities;   /* port capabilities */
101         unsigned short          bugs;           /* port bugs */
102         bool                    fifo_bug;       /* min RX trigger if enabled */
103         unsigned int            tx_loadsz;      /* transmit fifo load size */
104         unsigned char           acr;
105         unsigned char           fcr;
106         unsigned char           ier;
107         unsigned char           lcr;
108         unsigned char           mcr;
109         unsigned char           mcr_mask;       /* mask of user bits */
110         unsigned char           mcr_force;      /* mask of forced bits */
111         unsigned char           cur_iotype;     /* Running I/O type */
112         unsigned int            rpm_tx_active;
113         unsigned char           canary;         /* non-zero during system sleep
114                                                  *   if no_console_suspend
115                                                  */
116         unsigned char           probe;
117 #define UART_PROBE_RSA  (1 << 0)
118
119         /*
120          * Some bits in registers are cleared on a read, so they must
121          * be saved whenever the register is read but the bits will not
122          * be immediately processed.
123          */
124 #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
125         unsigned char           lsr_saved_flags;
126 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
127         unsigned char           msr_saved_flags;
128
129         struct uart_8250_dma    *dma;
130         const struct uart_8250_ops *ops;
131
132         /* 8250 specific callbacks */
133         int                     (*dl_read)(struct uart_8250_port *);
134         void                    (*dl_write)(struct uart_8250_port *, int);
135
136         struct uart_8250_em485 *em485;
137 };
138
139 static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
140 {
141         return container_of(up, struct uart_8250_port, port);
142 }
143
144 int serial8250_register_8250_port(struct uart_8250_port *);
145 void serial8250_unregister_port(int line);
146 void serial8250_suspend_port(int line);
147 void serial8250_resume_port(int line);
148
149 extern int early_serial_setup(struct uart_port *port);
150
151 extern int early_serial8250_setup(struct earlycon_device *device,
152                                          const char *options);
153 extern void serial8250_do_set_termios(struct uart_port *port,
154                 struct ktermios *termios, struct ktermios *old);
155 extern void serial8250_do_set_ldisc(struct uart_port *port,
156                                     struct ktermios *termios);
157 extern unsigned int serial8250_do_get_mctrl(struct uart_port *port);
158 extern int serial8250_do_startup(struct uart_port *port);
159 extern void serial8250_do_shutdown(struct uart_port *port);
160 extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
161                              unsigned int oldstate);
162 extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
163 extern int fsl8250_handle_irq(struct uart_port *port);
164 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
165 unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
166 void serial8250_tx_chars(struct uart_8250_port *up);
167 unsigned int serial8250_modem_status(struct uart_8250_port *up);
168 void serial8250_init_port(struct uart_8250_port *up);
169 void serial8250_set_defaults(struct uart_8250_port *up);
170 void serial8250_console_write(struct uart_8250_port *up, const char *s,
171                               unsigned int count);
172 int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
173
174 extern void serial8250_set_isa_configurator(void (*v)
175                                         (int port, struct uart_port *up,
176                                                 u32 *capabilities));
177
178 #endif